

NexType X1
A full 100% ISO 104 keyboard highly advanced with haptic and screen upgrade functionality
- Size
- 435.6 × 141.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 354
- Nets
- 279
- Pads
- 1,376
- Tracks, vias
- 3,344, 484
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 16 Aug 2026
- Updated
- 23 Aug 2026
Overview
NexType X1 is an open-source printed circuit board by shahalthamas, from the shahalthamas/NexType-X1 repository on GitHub. It is a 4-layer board of 435.6 × 141.2 mm with 354 parts on 279 nets, routed with 3,344 tracks and 484 vias.
It is built around the 74LVC1G125GW,125-JSM, 1N4148W and SK6812MINI-E. Its parts include 213 diodes, 59 switches, 9 resistors, 7 capacitors and 2 ICs. It belongs with the keyboards and input boards of this library.
Main components
374LVC1G125GW,125-JSM
SOT-353SOT-353 Buffers, Drivers, Receivers, Transceivers ROHSJSMSEMIBuffers, Drivers, Receivers, Transceivers1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching DiodesSK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
README
README.mdNexType X1
NexType X1 is my custom full size (104 key) wireless mechanical keyboard, built around a Seeed Studio XIAO nRF52840.
so basicaly i wanted a full size board that could do bluetooth and normal usb, but i also wanted to go way further than just switches on a PCB.. per-key RGB, haptics, a media knob, battery tracking, 3 bluetooth profiles, a proper 4 layer board and a fully custom case with a screwless underside. i designed the electronics in kicad, the whole case in fusion 360 and the firmware in ZMK/zephyr, which turned into a much bigger rabbit hole than expected lol

why i made this
i wanted one full size keyboard that i could actualy use for everything without giving up the numpad, nav cluster or function row, but i didnt want it to be another giant boring rectangle either
main goals i set for myself :
- design a proper 104 key ANSI PCB in kicad from scratch
- make it wireless over BLE but still keep normal usb-c whenever i need it
- scan the whole 8x13 matrix through two I2C gpio expanders so the tiny XIAO still has pins left
- put one SK6812MINI-E RGB led under every key, with the whole rail disabled on battery so it doesnt delete the lipo in 20 mins
- add a EC11 media encoder, DRV2605L haptics, fuel gauge, lock leds and 3 bluetooth profile leds
- make a huge 4 layer PCB that is actualy manufacturable and not just a nice render
- design a printable case with a seperate control console, six captured feet, brass ballast and a push-push screwless bottom mechanism
- write real ZMK firmware and ship a ready-to-flash
.uf2
the hardest part was honestly how everything affects everything else.. moving one connector changed PCB routing, the control console, cable access and sometimes firmware pins too. i also restarted almost the entire routing once because the first version was absolute copper spaghetti, which hurt but was 100% the right move
project status
the complete design side is here: schematic, routed PCB, manufacturing outputs, full CAD, 19 printable bodies and a verified firmware build. the physical PCB/case still needs to be ordered, assembled and tested, so this is a finished V1 design but not me pretending unbuilt hardware is already magically proven
whats included :
- kicad project, schematic and 4 layer pcb
- full 3d cad (
.f3d, full assembly.step, individual.stepand.stlfiles) - printable case, control console, feet, knob, trims, lock parts and underside skin
- production files (bom, positions, designators, ipc netlist and gerber zip)
- custom ZMK firmware source plus the ready
NexType-X1.uf2 - full build journal with 39 entries and 41 project images
current hardware summary :
| Layout | full size ANSI, 104 keys (main block + nav + numpad) |
| Controller | Seeed Studio XIAO nRF52840 |
| Connectivity | bluetooth LE and usb-c, with 3 stored BLE hosts and runtime output switching |
| Matrix | 8 rows x 13 columns, scanned through 2x TCA9555/PCA9555-compatible I2C expanders |
| Diodes | 1N4148W SOD-123, one per switch (ROW2COL) |
| RGB | 104x SK6812MINI-E, USB-only rail with a 400mA firmware current limit |
| Battery | protected 1S lipo input, hard switch and MAX17048 fuel gauge |
| Haptics | DRV2605L driving a LRA, with 3 persistent strength levels |
| Controls | EC11 media encoder, profile/status leds, display + expansion + SWD headers |
| Stabilizers | DUROCK V3 100% PCB-mount kit |
| Switches | Akko V3 Creamy Blue Pro |
| Keycaps | 104/108-key ANSI PBT set |
| Case | 19-part 3d printed design with captured feet, screwless skin and brass ballast |
| PCB | 435.56 x 141.15 mm, 4 layer FR-4, ENIG, quoted from JLCPCB |
| Firmware | ZMK / Zephyr, ready-to-flash UF2 included |
the top looks like a clean full size board, but most of the weird engineering is hiding underneath.. the removable skin captures six seperate feet, the brass weight has a release path and the push-push lock is there because apparently normal screws were not dramatic enough
images
full 3d model

control console
the seperate console keeps the display opening, encoder and service headers in one replaceable print, so changing one tiny part doesnt mean reprinting a 45cm case

pcb

schematic / wiring
the 104-key matrix, per-key rgb chain, both gpio expanders, controller, battery/fuel gauge, haptics, encoder, display, debug, expansion and status circuits are all grouped on one big sheet..

other screenshots
some more views of the board, mechanism and firmware

repo file checklist
important files in this repo :
PCB/NexType_X1.kicad_proPCB/NexType_X1.kicad_schPCB/NexType_X1.kicad_pcbPCB/NexType_X1_ANSI104_layout.jsonCAD/Full NexType X1 STEP/NexType_X1_Full_Assembly.stepCAD/Printable Case Files/-> individualSTEP/andSTL/exports for all 19 printable bodiesFusion Files/NexType_X1_CAD.f3dFirmware/NexType-X1.uf2Firmware/boards/shields/nextype_x1/nextype_x1.keymapFirmware/src/-> custom rgb, haptics, host-status and feature codeProduction/bom.csvProduction/positions.csvProduction/designators.csvProduction/netlist.ipcProduction/NexType_X1_Advanced__ANSI_104_BLE_Keyboard_B.zip(gerbers)bom.csvPDFs/NexType_X1_Sch.pdf(schematic print)PDFs/NexType_X1_PCB.pdf(11-layer pcb print)JOURNAL.md
cad
designed in fusion 360. the original editable file is Fusion Files/NexType_X1_CAD.f3d, theres a full assembly .step if you just want the complete geometry and every printable body is also exported seperately as both .step and .stl
the final print set has 19 named bodies: the main bottom case, seperate control console, knob, three header trims, lock/release parts, six individual feet, NX1 weight cover and the captured underside skin. the massive case was kept flat and the annoying small details became seperate inserts so it has a realistic chance of printing without becoming support-material soup
firmware note
firmware is ZMK running on zephyr, with a custom shield and feature module in Firmware/
- ready-to-flash file:
Firmware/NexType-X1.uf2 - 104-key 8x13 matrix through two I2C expanders
- 3 bluetooth host profiles plus usb/bluetooth output switching
- volume encoder, media controls, mouse controls and ZMK Studio remapping
- 8 custom RGB effects with per-key coordinates and a 400mA current limiter
- USB-only RGB rail, so battery mode automatically shuts all 104 pixels down
- DRV2605L haptics with on/off, test and 3 saved strength levels
- MAX17048 battery reporting, caps lock, num lock and profile indicators
to flash it : double tap RESET on the XIAO nRF52840, wait for the bootloader drive and copy NexType-X1.uf2 onto it. the board restarts by itself after the copy
hold Menu to use the control layer. Menu + F1/F2/F3 picks a bluetooth profile, Menu + F5/F6/F7 controls USB/BLE output, Menu + F8 through F12 handles RGB and the encoder does volume by defalt. the full list is in Firmware/README.md because theres no chance i remember every combo either
the checked build uses 265,084 bytes of flash and 83,602 bytes of RAM. source, pinned ZMK revision and the exact UF2 SHA-256 are all included so the binary isnt just some mystery file from the void
bom (summary)
full bom is in bom.csv. prices are the current carts/quotes in rupees and supplier minimums mean some lines buy more parts than the board actualy uses
| # | Name | Purpose | Cost (₹) | Cost (USD) | Distributor | Link |
|---|---|---|---|---|---|---|
| 1 | 5x 4-layer FR-4 PCB, ENIG | the giant main board where literally everything lives | 6,940.5922 | $72.5243 | JLCPCB | Buy |
| 2 | Seeed Studio XIAO nRF52840 | tiny brain doing all the USB, Bluetooth and keyboard wizardry | 2,576.03 | $26.9177 | Amazon | Buy |
| 3 | 100nF 0603 X7R capacitors | keeps the IC power rails chill so noise doesnt start drama | 380 | $3.9707 | Amazon | Buy |
| 4 | 10uF 0805 X5R capacitors | handles bigger power dips so the board doesnt randomly reboot | 269 | $2.8109 | Amazon | Buy |
| 5 | 47uF 0805 MLCC | lil bulk power buffer for sudden current munchers | 129 | $1.3480 | Amazon | Buy |
| 6 | 1uF 0603 MLCC | support caps keeping fuel gauge and haptics behaving | 74 | $0.7732 | Amazon | Buy |
| 7 | 1N4148W SOD-123 diodes | stops ghost presses from summoning bonus keys | 897 | $9.3730 | Amazon | Buy |
| 8 | 1206L110/6NR resettable fuse | takes the hit if the power rail gets sus | 16 | $0.1672 | Robu | Buy |
| 9 | JST right-angle PCB headers | clean battery and haptic plug-in points | 65 | $0.6792 | Robu | Buy |
| 10 | Blue 0603 status LEDs | shows which bluetooth profile is awake | 11.04 | $0.1154 | Robu | Buy |
| 11 | 2x PCA9555DWR I/O expanders | turns two I2C wires into the whole 8x13 matrix | 898.53 | $9.3890 | LionCircuits | Buy |
| 12 | MAX17048 fuel-gauge IC | gives real battery percentage instead of vibes | 369.86 | $3.8648 | LionCircuits | Buy |
| 13 | DRV2605L haptic driver | makes the LRA do crisp lil feedback bumps | 276.33 | $2.8875 | LionCircuits | Buy |
| 14 | 74LVC1G125 logic buffer | cleans up 3.3V RGB data for the 5V LEDs | 101.25 | $1.0580 | LionCircuits | Buy |
| 15 | Green 0603 status LEDs | caps-lock and num-lock glow squad | 109.8 | $1.1473 | LionCircuits | Buy |
| 16 | Breakaway male header strips | becomes debug, display and expansion headers | 169 | $1.7659 | Amazon | Buy |
| 17 | Chanzon 0603 resistor kit | pullups, led limits and the other tiny boring stuff | 899 | $9.3939 | Amazon | Buy |
| 18 | 135x Akko V3 Creamy Blue Pro switches | the tactile bits under every keycap aka main character | 6,078 | $63.5108 | Amazon | Buy |
| 19 | 104/108-key ANSI PBT keycap set | the part your fingers touch and the boards whole outfit | 1,412 | $14.7544 | Amazon | Buy |
| 20 | DUROCK V3 stabilizer kit | keeps the big keys from doing wobble ASMR | 3,941.4 | $41.1849 | Amazon | Buy |
| 21 | JST-PH silicone-wire pigtails | ready-made battery and haptic hookups | 139 | $1.4525 | Amazon | Buy |
| 22 | 1mm brass sheet | gives this huge board proper desk weight | 980 | $10.2403 | Amazon | Buy |
| 23 | USB-A to USB-C data cable | wired mode, flashing and full RGB juice | 99 | $1.0345 | Amazon | Buy |
| 24 | SK6812 MINI-E RGB LEDs | one addressable pixel per key because plain was too basic | 4,098 | $42.8212 | Ubuy | Buy |
| 25 | CAD model printing | turns the massive case files into real plastic | 2,944.0887 | $30.7637 | JLC3DP | Buy |
| 26 | Cart rounding adjustment | keeps the checkout math matching exactly | 0.19 | $0.0020 | LionCircuits | Buy |
| total bom cost : ₹33,873.1109 / $353.9503 |
thanks for reading,, if you build one or have any questions feel free to open a issue. this is easily the most overengineered keyboard thing ive made and i learned a stupid amount about PCB layout, power, CAD mechanisms and embedded firmware while doing it :)
Parts
354| Qty | Value | Footprint | References |
|---|---|---|---|
| 104 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D100, D101, D102, D103, D104 +88 |
| 104 | SK6812MINI-E | LED_SMD:LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | LED1, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED100, LED101, LED102, LED103, LED104 +88 |
| 6 | M3 | MountingHole_3.2mm_M3 | H2, H3, H5, H6, H7, H8 |
| 5 | 1k STATUS | Resistor_SMD:R_0603_1608Metric | R4, R5, R6, R7, R8 |
| 3 | LTST-C193TBKT-5A BLUE | LED_SMD:LED_0603_1608Metric | LED107, LED108, LED109 |
| 2 | XL-1608UGC-04 GREEN | LED_SMD:LED_0603_1608Metric | LED105, LED106 |
| 1 | '" | SW_MX_1.00u | SW70 |
| 1 | * | SW_MX_1.00u | SW36 |
| 1 | + | SW_MX_2.00u_Vertical | SW58 |
| 1 | ,< | SW_MX_1.00u | SW83 |
| 1 | - | SW_MX_1.00u | SW37 |
| 1 | -_ | SW_MX_1.00u | SW28 |
| 1 | . | SW_MX_1.00u | SW104 |
| 1 | .> | SW_MX_1.00u | SW84 |
| 1 | / | SW_MX_1.00u | SW35 |
| 1 | /? | SW_MX_1.00u | SW85 |
| 1 | 0 | SW_MX_2.00u | SW103 |
| 1 | 0) | SW_MX_1.00u | SW27 |
| 1 | 1 | SW_MX_1.00u | SW88 |
| 1 | 1! | SW_MX_1.00u | SW18 |
| 1 | 100n U1 | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 100n U2 | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 100nF X7R | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 10k INT | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 10u BAT | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 10u MCU | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 1u DRV REG | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 2 | SW_MX_1.00u | SW89 |
| 1 | 2@ | SW_MX_1.00u | SW19 |
| 1 | 3 | SW_MX_1.00u | SW90 |
| 1 | 3# | SW_MX_1.00u | SW20 |
| 1 | 33R | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 4 | SW_MX_1.00u | SW72 |
| 1 | 4$ | SW_MX_1.00u | SW21 |
| 1 | 4.7k SCL | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 4.7k SDA | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 47u RGB | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 5 | SW_MX_1.00u | SW73 |
| 1 | 5% | SW_MX_1.00u | SW22 |
| 1 | 6 | SW_MX_1.00u | SW74 |
| 1 | 6^ | SW_MX_1.00u | SW23 |
| 1 | 7 | SW_MX_1.00u | SW55 |
| 1 | 7& | SW_MX_1.00u | SW24 |
| 1 | 74LVC1G125GW,125 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U5 |
| 1 | 8 | SW_MX_1.00u | SW56 |
| 1 | 8* | SW_MX_1.00u | SW25 |
| 1 | 9 | SW_MX_1.00u | SW57 |
| 1 | 9( | SW_MX_1.00u | SW26 |
| 1 | ;: | SW_MX_1.00u | SW69 |
| 1 | =+ | SW_MX_1.00u | SW29 |
| 1 | A | SW_MX_1.00u | SW60 |
| 1 | AMBIENT SENSOR / EXPANSION | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | B | SW_MX_1.00u | SW80 |
| 1 | Backspace | SW_MX_2.00u | SW30 |
| 1 | C | SW_MX_1.00u | SW78 |
| 1 | Caps | SW_MX_1.75u | SW59 |
| 1 | D | SW_MX_1.00u | SW62 |
| 1 | DRV2605L HAPTIC DRIVER | Package_SO:MSOP-10_3x3mm_P0.5mm | U4 |
| 1 | Delete | SW_MX_1.00u | SW52 |
| 1 | Down | SW_MX_1.00u | SW101 |
| 1 | E | SW_MX_1.00u | SW41 |
| 1 | End | SW_MX_1.00u | SW53 |
| 1 | Enter | SW_MX_2.25u | SW71 |
| 1 | Esc | SW_MX_1.00u | SW1 |
| 1 | F | SW_MX_1.00u | SW63 |
| 1 | F1 | SW_MX_1.00u | SW2 |
| 1 | F10 | SW_MX_1.00u | SW11 |
| 1 | F11 | SW_MX_1.00u | SW12 |
| 1 | F12 | SW_MX_1.00u | SW13 |
| 1 | F2 | SW_MX_1.00u | SW3 |
| 1 | F3 | SW_MX_1.00u | SW4 |
| 1 | F4 | SW_MX_1.00u | SW5 |
| 1 | F5 | SW_MX_1.00u | SW6 |
| 1 | F6 | SW_MX_1.00u | SW7 |
| 1 | F7 | SW_MX_1.00u | SW8 |
| 1 | F8 | SW_MX_1.00u | SW9 |
| 1 | F9 | SW_MX_1.00u | SW10 |
| 1 | G | SW_MX_1.00u | SW64 |
| 1 | H | SW_MX_1.00u | SW65 |
| 1 | HARD POWER | Button_Switch_SMD:SW_SPDT_CK_JS102011SAQN | SWP1 |
The 298 most common of 354 parts.
Similar boards
- 2 layers50 × 60 mm

- 2 layers99.1 × 90.7 mm

Bgkeeb
sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…
108 parts108 - 2 layers291.8 × 134.6 mm

- 2 layers243.9 × 136.5 mm

Barobord
sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!
157 parts57 - 2 layers227.3 × 84.9 mm

Stm32 hotswap chiffre
sporkus/le_chiffre_keyboard_stm32
Le Chiffre keyboard pcb with stm32F072
110 parts53CERN-OHL-W-2.0 - 2 layers43.5 × 33.9 mm

Adapter
Bastardkb/Charybdis-EC11
EC11 PCB to be used in place of the trackball in the Charybdis keyboard.
26 parts24 - 2 layers142.6 × 120 mm

- 2 layers100 × 95.3 mm

Questions
How big is the NexType X1 PCB?
It measures 435.6 × 141.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the NexType X1 use?
354 parts, built around the 74LVC1G125GW,125-JSM, 1N4148W and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NexType X1 KiCad files?
From the shahalthamas/NexType-X1 repository on GitHub, at the commit this page was made from: the board is PCB/NexType_X1.kicad_pcb and its schematic PCB/NexType_X1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the NexType X1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask shahalthamas before reusing the design.