
Bgkeeb
sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…

This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…
Bgkeeb is an open-source printed circuit board by sadekbaroudi, from the sadekbaroudi/bgkeeb repository on GitHub. It is a 2-layer board of 99.1 × 90.7 mm with 108 parts on 80 nets, routed with 1,643 tracks and 262 vias.
It is built around the 1N4148W and SK6812MINI-E. Its parts include 74 diodes, 22 switches, 3 ICs, 2 resistors and 1 connector. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Baby Groot Keyboard (bgkeeb)
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can add that as well, though the case doesn't support it, so you'll need to devise your own mechanism).
Given the pcb is so small, pcb prototype manufacturers will fab this for very cheap, or even free. As of this writing, nextpcb will ship fab and ship this keyboard 100% for free (in green only). jlcpcb will fab and ship these for $2 (USD).
There are two pcbs, the choc version and the mx version.
For the mx version, see the pcb/mx directory in the repository For the choc version, see the pcb/mx directory in the repository
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!
If you don't want to, or can't afford to support me, please send me a message to let me know you've built one, along with pictures. Also, feel free to submit a pull request with pictures into this repository. I'd be happy to showcase your build.
Reddit: /u/sadekbaroudi Discord: sadekbaroudi#1258
You can use the firmware found here: https://github.com/sadekbaroudi/qmk_firmware/tree/master/keyboards/fingerpunch/bgkeeb/
zmk firmware here: https://github.com/ezxzeng/zmk-bgkeeb


@ardakilic

@carboncopy101

@robopuff

@JulioPDX

@ezxzeng
case for the wireless choc build found here
| Qty | Value | Footprint | References |
|---|---|---|---|
| 38 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +22 |
| 36 | SK6812MINI-E | kicad-keyboard-parts:MX_SK6812MINI-E | D38, D39, D40, D41, D42, D43, D44, D45, D46, D47, D48, D49, D50, D51, D52, D53 +20 |
| 18 | SW_Push | keyswitches:SW_PG1350_reversible | SW1, SW2, SW3, SW4, SW11, SW12, SW13, SW14, SW15, SW21, SW22, SW23, SW24, SW25, SW34, SW35 +2 |
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | , , , |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R4 |
| 2 | RotaryEncoder_Switch | Keebio-Parts:RotaryEncoder_EC11-no-legs | SW7, SW42 |
| 2 | SW_Push | random-keyboard-parts:SKQG-1155865 | SW8, SW41 |
| 2 | TRRS | Keebio-Parts:TRRS-PJ-320A | U3, U4 |
| 1 | Conn_01x02_Female | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal_reversible | BATJ1 |
| 1 | Pimoroni | other_parts:pimoroni | J1 |
| 1 | ProMicro | Keebio-Parts:ArduinoProMicro | U1 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12_reversible | SW_POWER1 |

sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…


sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!

sporkus/le_chiffre_keyboard_stm32
Le Chiffre keyboard pcb with stm32F072

Bastardkb/Charybdis-EC11
EC11 PCB to be used in place of the trackball in the Charybdis keyboard.



WillACosta/wlfkbd
The WLF is a 40-key split keyboard (20 keys per half) with a column-staggered matrix and a splayed thumb cluster.

TweetyDaBird/Fat-Chameleon
A Grid Ortho keyboard for BM40, JJ40/JJ50 cases inspired by Planck and Preonic
It measures 99.1 × 90.7 mm and has 2 copper layers, 1.6 mm thick.
108 parts, built around the 1N4148W and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sadekbaroudi/bgkeeb repository on GitHub, at the commit this page was made from: the board is pcb/choc_wireless/bgkeeb.kicad_pcb and its schematic pcb/choc/bgkeeb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sadekbaroudi before reusing the design.