

MegaXE keyboard
Random 3D models
- Size
- 291.8 × 134.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 359
- Nets
- 207
- Pads
- 1,362
- Tracks, vias
- 2,492, 213
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 2 Mar 2021
- Updated
- 6 Nov 2026
Overview
MegaXE keyboard is an open-source printed circuit board by bleroy, from the bleroy/3d-junkyard repository on GitHub. It is a 2-layer board of 291.8 × 134.6 mm with 359 parts on 207 nets, routed with 2,492 tracks and 213 vias.
It is built around the RP2040, W25Q128JVSIQ and SK6812MINI-E, with the 1N4148W and SM03B-SRSS-TB among its other parts. Its parts include 150 diodes, 97 capacitors, 73 switches, 9 resistors and 5 connectors. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Main components
5RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHSK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching DiodesSM03B-SRSS-TB
Header SR 1.0 SMT side entry, 1mm pitchJSTUncategorised
README
README.md3d-junkyard
A repository of various 3D models and projects.
So far:
- DecentXE: a mechanical keyboard for Atari XE computers
- DecentXL: a mechanical keyboard for Atari 600XL and 800XL computers
- Decent400: a mechanical keyboard for Atari 400 computers
- Decent800: a mechanical keyboard for Atari 800 computers
- Decent1200: a mechanical keyboard for Atari 1200XL computers
- Dungeon Master: reverse-engineering Dungeon Master's rendering and running it in a browser
- Beyond the Jaggi lines: reverse-engineering Rescue on Fractalus and running it in a browser
- JoyKeyMX: a joypad compatible with Atari 8-bit and 7800 built with Cherry MX compatible switches
License
All hardware in this repository is licensed under CERN Open Hardware License v2. All software in this repository is licensed under the MIT license. All documentation in this repository is licensed under Creative Commons Creative Commons Attribution-ShareAlike 4.0 International Public License.
Full terms can be found in the LICENSE file or on the web sites linked above.
Parts
359| Qty | Value | Footprint | References |
|---|---|---|---|
| 90 | 100nF | Capacitor_SMD:C_0402_1005Metric | C10, C11, C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112, C113 +74 |
| 80 | SK6812MINI | Library:LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D149, D150, D151, D152, D153, D154, D155, D156, D157, D158, D159, D160, D161, D162, D163, D164 +64 |
| 70 | 1N4148W | Diode_SMD:D_SOD-123 | D101, D103, D105, D107, D109, D111, D113, D115, D119, D121, D123, D125, D127, D128, D129, D130 +54 |
| 65 | MX | Library:Kailh_socket_MX_1-00U | SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW19, SW20, SW21, SW22, SW23, SW24, SW25, SW26 +49 |
| 17 | TestPoint | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17 +1 |
| 4 | MX | Library:Kailh_socket_MX_2-00U | SW62, SW63, SW69, SW75 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3, H4 |
| 3 | 10uF | Capacitor_SMD:C_0402_1005Metric | C27, C28, C43 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R30, R31, R32 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C24, C25 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C5, C14 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R26, R28 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 1 | 0 | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | R37 |
| 1 | 12MHz | Crystal:Crystal_SMD_Abracon_ABM8AIG-4Pin_3.2x2.5mm | X1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04_Socket | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J1 |
| 1 | DNF | Resistor_SMD:R_0402_1005Metric | R36 |
| 1 | MX | Library:Kailh_socket_MX_6-25U | SW18 |
| 1 | NCP1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U7 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | SM03B-SRSS-TB | Connector_JST:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J9 |
| 1 | SW_BOOT_SELECT | Library:TactileSwitch | SW2 |
| 1 | SW_RESET | Library:TactileSwitch | SW3 |
| 1 | USB_C_Receptacle_USB2.0_16P | Library:USB_C_Receptacle_C2765186 | J5 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U9 |
More from bleroy/3d-junkyard
12- 2 layers390.6 × 146.7 mm

- 2 layers329.2 × 131.1 mm

- 2 layers329.2 × 131.1 mm

- 2 layers129.6 × 74.8 mm

- 2 layers329.2 × 131.1 mm

- 2 layers329.2 × 129.3 mm

- 2 layers343.5 × 112 mm

- 2 layers343.5 × 112 mm

- 2 layers129.5 × 125.1 mm

- 2 layers286 × 108.2 mm

- 2 layers314.3 × 97 mm

- 2 layers286 × 108.2 mm

Similar boards
- 6 layers90 × 90 mm

Codex micro wired revA route nognd
slopus/codex-keybored
A 100% vibe-coded hardware build: Fusion 360, six-layer KiCad PCB, STM32 firmware, and live JLC factory handoff.
97 parts10 - 2 layers368 × 104 mm

TbKB
BigTuna94/RP2.65-F
RP2.65-F Mechanical Keyboard - a 65% Ortholinear Keyboard with Faders
331 parts4MIT - 2 layers115.8 × 82.5 mm

Spica
illness072/Spica-PCB
Spica is a 38-keys keyboard inspired by the Gemini Keyboard layout by zk-phi(@zk-phi). It was named by Sumiso(@kutsuhimo3).
72 parts3 - 2 layers304.3 × 108.3 mm

- 2 layers446.9 × 141.7 mm

- 2 layers308.8 × 99.3 mm

- 4 layers304.8 × 125.5 mm

- 2 layers295 × 128.6 mm

GlyphMatrix
Thunderbird2086/OmniCode-9001
A modular keyboard made up of three detachable untis.
281 partsMIT
Questions
How big is the MegaXE keyboard PCB?
It measures 291.8 × 134.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MegaXE keyboard use?
359 parts, built around the RP2040, W25Q128JVSIQ, SK6812MINI-E and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MegaXE keyboard KiCad files?
From the bleroy/3d-junkyard repository on GitHub, at the commit this page was made from: the board is Decent60/keyboard/MegaXE-keyboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MegaXE keyboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask bleroy before reusing the design.