

RP2.65-F Mechanical Keyboard - a 65% Ortholinear Keyboard with Faders
- Size
- 368 × 104 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 331
- Nets
- 195
- Pads
- 1,340
- Tracks, vias
- 2,546, 344
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 Jan 2022
- Updated
- 2 May 2022
Overview
TbKB is an open-source printed circuit board by BigTuna94, from the BigTuna94/RP2.65-F repository on GitHub, published under the MIT licence. It is a 2-layer board of 368 × 104 mm with 331 parts on 195 nets, routed with 2,546 tracks and 344 vias.
It is built around the RP2040, W25Q128JVSIQ and 1N4148W, with the SK6812MINI-E among its other parts. Its parts include 140 diodes, 87 capacitors, 8 resistors, 4 ICs and 2 crystals. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Main components
4RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching DiodesSK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
README
README.mdRP2.65-F
An 65% Ortholinear Keyboard based on the Rasperry Pi RP2040 with faders.

Parts
331| Qty | Value | Footprint | References |
|---|---|---|---|
| 80 | 100n | Capacitor_SMD:C_0402_1005Metric | C11, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27 +64 |
| 70 | 1N4148W | Diode_SMD:D_SOD-123F | D0, D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22 +54 |
| 70 | SK6812MINI | misc_kbd_parts:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm_reverse_mount | D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112, D113, D114, D115 +54 |
| 61 | SW_SPST | misc_kbd_parts:Kailh_socket_MX_1u | K_0, K_1, K_2, K_10, K_11, K_12, K_13, K_14, K_15, K_17, K_18, K_19, K_20, K_21, K_22, K_23 +45 |
| 5 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3, H4, H5 |
| 5 | SW_SPST | misc_kbd_parts:Kailh_socket_MX_1.5u | K_16, K_31, K_58, K_59, K_63 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C12 |
| 3 | 1k | Capacitor_SMD:C_0402_1005Metric | R1, R5, R6 |
| 3 | R_Potentiometer_US | potentiometers:Potentiometer_Bourns_PTA6043_Single_Slide | RV1, RV2, RV3 |
| 3 | SW_SPST | misc_kbd_parts:Kailh_socket_MX_1.25u | K_47, K_67, K_68 |
| 3 | SW_SPST_3u | misc_kbd_parts:Kailh_socket_MX_1u | K_space1, K_space1, K_space1 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C8, C10 |
| 2 | 27 | Capacitor_SMD:C_0402_1005Metric | R7, R8 |
| 2 | 27p | Capacitor_SMD:C_0402_1005Metric | C4, C5 |
| 2 | 5.1k | Capacitor_SMD:C_0402_1005Metric | R2, R4 |
| 2 | KMR2 | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | RESET, USB_BOOT |
| 2 | SW_SPST | keyswitches:Kailh_socket_MX_2u | K_27, K_28 |
| 1 | ECS-120:ECS-120-10-36B-CWY-TR | Y1 | |
| 1 | CherryMX_2.25U | misc_kbd_parts:CherryMX_2.25u_PCB_Stabilizer | U41 |
| 1 | DNF | Capacitor_SMD:C_0402_1005Metric | R3 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | RP2040 | RP2040_minimal:RP2040-QFN-56 | U3 |
| 1 | SW_SPST | misc_kbd_parts:Kailh_socket_MX_2u | K_65 |
| 1 | SW_SPST | keyswitches:Kailh_socket_MX_2.25u | K_66 |
| 1 | Stabilizer_Cherry_MX_2.00u | Mounting_Keyboard_Stabilizer:Stabilizer_Cherry_MX_2.00u | 2U_STAB |
| 1 | Stabilizer_Cherry_MX_3.00u | Mounting_Keyboard_Stabilizer:Stabilizer_Cherry_MX_3.00u | 3U SPACE STAB |
| 1 | Stabilizer_Cherry_MX_6.25u | Mounting_Keyboard_Stabilizer:Stabilizer_Cherry_MX_6.25u | 6.25U SPACE STAB |
| 1 | USB Type C | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | X1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U2 |
| 1 | ZFR_KBD | misc_kbd_parts:ZFR_KBD |
Similar boards
- 2 layers291.8 × 134.6 mm

- 6 layers90 × 90 mm

Codex micro wired revA route nognd
slopus/codex-keybored
A 100% vibe-coded hardware build: Fusion 360, six-layer KiCad PCB, STM32 firmware, and live JLC factory handoff.
97 parts10 - 2 layers115.8 × 82.5 mm

Spica
illness072/Spica-PCB
Spica is a 38-keys keyboard inspired by the Gemini Keyboard layout by zk-phi(@zk-phi). It was named by Sumiso(@kutsuhimo3).
72 parts3 - 2 layers304.3 × 108.3 mm

- 2 layers446.9 × 141.7 mm

- 2 layers308.8 × 99.3 mm

- 4 layers304.8 × 125.5 mm

- 2 layers295 × 128.6 mm

GlyphMatrix
Thunderbird2086/OmniCode-9001
A modular keyboard made up of three detachable untis.
281 partsMIT
Questions
How big is the TbKB PCB?
It measures 368 × 104 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TbKB use?
331 parts, built around the RP2040, W25Q128JVSIQ, 1N4148W and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TbKB KiCad files?
From the BigTuna94/RP2.65-F repository on GitHub, at the commit this page was made from: the board is kicad/TbKB.kicad_pcb and its schematic kicad/TbKB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TbKB design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).