Skip to the content
2 layers226 × 92 mmChameleon v1 0, the printed circuit board in 3D

A Grid Ortho keyboard for BM40, JJ40/JJ50 cases inspired by Planck and Preonic

Size
226 × 92 mm
Copper layers
2
Thickness
1.6 mm
Parts
205
Nets
135
Pads
897
Tracks, vias
1,339, 338
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
24 Aug 2023
Updated
18 Oct 2026

Overview

Chameleon v1 0 is an open-source printed circuit board by TweetyDaBird, from the TweetyDaBird/Fat-Chameleon repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 226 × 92 mm with 205 parts on 135 nets, routed with 1,339 tracks and 338 vias.

It is built around the RP2040, SN74LV1T34DBV and W25Q32JVUUIQ, with the SPX3819M5-L-3-3/TR, SRV05-4 and 1N4148W among its other parts. Its parts include 68 switches, 60 diodes, 23 capacitors, 8 resistors and 5 ICs. It belongs with the keyboards and input boards and the RP2040 boards of this library.

Main components

8

README

README.md

The Fat Chameleon

Chameleon

Features

Chameleon is a grid type orthogonal keyboard with two optional layouts in one single PCB. Being able to break off the bottom row allows both a 5x12 layout similar to the popular Preonic and a 4x12 layout similar to the equally popular little brother Planck on the same PCB.

Using the more common 19.05 mm grid spacing (vs Preonic & Planck's unique 19 mm) this PCB fit's several popular 'aftermarket' keyboard cases intended for JJ40/JJ50 and BM40 PCB's without modification. (Please read below!)

Being fully hot-swap and with PCB mounted stabilizers, Chameleon adds support for up to four encoders and a bottom row allowing either a single stabilized 2u key or two 2u keys in the middle, allowing for a layout that suits most users. If used as a 5 row keyboard, the bottom encoders can alternatively be placed at the edges on the second row, but not more than one per corner.

The Chameleon features 8 bottomfacing RGB LEDs for underglow effects or to be used for layer indication or similar.

Please Note! This PCB does NOT fit a Planck/Preonic case! You will need a different case to complete the build!

Main Features:

  • QMK and VIAL compatible, fully programmable keyboard**
  • RP2040 MCU, Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
  • 264KB of SRAM, and 4MB of on-board Flash memory
  • USB-C connector, (USB 1.1 device and host support)
  • Low-power sleep and dormant modes
  • Drag-and-drop programming using mass storage over USB
  • Kaihl hot-swap sockets for Cherry MX compatible switches (3 & 5-pin)
  • Cherry Style PCB mounted stabilizers
  • Two main layouts:
    • 5x12 with 58 to 60 keys
    • 4x12 with 46 to 48 keys (Break off bottom row)
  • Configurable bottom row:
    • Full 1u grid
    • 1x centered, stabilized 2u key
    • 2x centered, stabilized 2u keys

Optional add-ons:

  • Support for up to 4 rotary encoders (one encoder per corner)
  • Optional RGB underglow (8x SK6812 mini-e)
  • FR4 Front plate (FR4 material, same as PCB), with full layout options (Black / White). This is designed to fit most/all existing cases of a tray (or burger) mounting type, 3D printed or CNC. Se below for listed tested cases.

These options requires additional components not included in this listing and sold separately.

Assembly

Little or no tools at all needed! The PCB can be delivered fully soldered and ready to use, either as a full matrix, or with your selection of rotary encoders (encoders need to be added to the order), or as a "DIY Kit" with the hotswap sockets for the 6 encoder positions not soldered.

The 8 optional RGB LED's needs to be soldered in place if used. (These are pre-soldered together with the encoders/hot-swap sockets at no extra cost, if that option is selected and all parts are purchased in the same order).

Case & Plate

The design is made to fit any existing cases for JJ40/JJ50 & BM40 both CNC and 3D printed. This means that existing cases with an integrated plate is then limited to the layout options supported by that case/plate even if the PCB supports more layouts.

Cases verified to work:

*Mounting hardware is associated with the case, and not delivered with the Chameleon PCB and Plate.

Front Plate

A front plate in FR4 (PCB core material) is available as an add-on, but may not fit all cases. To be as much a "one size fit's all" plate, this plate has rounded corners, which may leave gaps in the corners on some cases.

3D-print a case

This is an adaptation of the Olkb Low Pro, ie low profile case for the Planck, slightly re-designed to fit the 'normal' key spacing of the JJ40/JJ50 PCB and available as two designs to fit either the Planck or Preonic layout. Fully compatible with the FR4 front plate.

Examples of a 3D-printed case in white (Including the top image):

Built Chameleon Lit Chameleon

Sandwich type case/plates

A full sandwich type case in FR4 material will be added at a later date for those interested, but is for now WIP.

Making Chameleon yourself

Chameleon is open source / open hardware, and can be manufactured by anyone. The release contains all the neccesary files like parts lists, positions files etc for a full PCB/SMT production.

The formatting and files are geared towards JLCPCB, but never tested as such, as I only manufacture the PCB then do the assembly myself (at least until this reaches a volume justifying full SMT production).

The components are small enough that you would have to be highly skilled to attempt to assemble this either as hand soldered, or small scale/DIY SMT. I would highly recommend ordering the PCB as fully assembled unless you know you have the neccesary skill-set.

Buy a kit!

I sell complete kits, making it easy to build your keyboard, and it also supports prototypes for new wacky ones.

Buy it on Lectronz

Discord for build help and discussions!

Discuss on Discord

License

CC BY-SA 4.0 - This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Parts

205
QtyValueFootprintReferences
601N4148WDiode_SMD:D_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +44
60~Keyboard Switches:SW_MX_HotSwapSW2, SW10, SW11, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24, SW25 +44
12SK6812MINI-EKeyboard RGB:RGB_SK6812MINI-ERGB1, RGB2, RGB3, RGB4, RGB5, RGB6, RGB7, RGB8, RGB9, RGB10, RGB11, RGB12
10Spacer_PCBKeyboard_Plate:Spacer Plate holeH1, H2, H3, H4, H5, H6, H7, H8, H9, H10
9100nCapacitor_SMD:C_0402_1005MetricC2, C3, C4, C5, C6, C7, C9, C10, C13
8100nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC16, C17, C18, C19, C20, C21, C22, C23
6RotaryEncoder_SwitchKeyboard Encoders:Encoder_Alps_EC11E_SmallENC1, ENC2, ENC3, ENC4, ENC5, ENC6
6Stabilizer_2u_MXKeyboard Stabilizer:Stabilizer_Cherry_MX_2.00uST1, ST2, ST3, ST4, ST5, ST6
6~Keyboard Switches:SW_MX_HotSwap_FOR ENCODERSW1, SW12, SW37, SW48, SW49, SW60
41uCapacitor_SMD:C_0402_1005MetricC1, C8, C11, C12
210kResistor_SMD:R_0402_1005MetricR3, R7
21kResistor_SMD:R_0402_1005MetricR4, R10
227RResistor_SMD:R_0402_1005MetricR5, R6
230pCapacitor_SMD:C_0402_1005MetricC14, C15
25.1KResistor_SMD:R_0402_1005MetricR1, R2
2Ferrite BeadCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderFB1, FB2
2SW_PushKeyboard Common:YTSA010SW67, SW68
1500 mAResistor_SMD:R_0805_2012MetricF1
1CC-BY-SA-4.0Logotypes:CC_BY_SA_40_tinyLogo1
1QMK_LogoLogotypes:Powered_by_QMKLogo2
1RP2040Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mmU3
1SN74LV1T34DBVPackage_TO_SOT_SMD:SOT-23-5U4
1SPX3819M5-L-3-3/TRPackage_TO_SOT_SMD:SOT-23-5U1
1SRV05-4Package_TO_SOT_SMD:SOT-23-6_HandsolderingU5
1TXM12M0004252LBCEO00TCrystal:Crystal_SMD_2520-4Pin_2.5x2.0mmY1
1USB_C_Receptacle_USB2.0LCSC_Library:HRO_TYPE-C-31-M-12J1
1W25Q32JVUUIQKeyboard Common:USON-8_4x3mm_P0.8mmU2

More from TweetyDaBird/Fat-Chameleon

2
  • 2 layers226 × 92 mmChameleon v1 10, the printed circuit board in 3D

    Chameleon v1 10

    TweetyDaBird/Fat-Chameleon

    A Grid Ortho keyboard for BM40, JJ40/JJ50 cases inspired by Planck and Preonic

    205 parts14CC-BY-SA-4.0
  • 2 layers226 × 92 mmChameleon, the printed circuit board in 3D

    Chameleon

    TweetyDaBird/Fat-Chameleon

    A Grid Ortho keyboard for BM40, JJ40/JJ50 cases inspired by Planck and Preonic

    201 parts14CC-BY-SA-4.0

Similar boards

  • 2 layers225.5 × 93 mmSkinny Chameleon, the printed circuit board in 3D

    Skinny Chameleon

    TweetyDaBird/Skinny-Chameleon

    The Skinny Chameleon is a grid type orthogonal keyboard made to be a direct drop-in for the Preonic's and Planck's PCB's.

    201 parts3
  • 2 layers285 × 94.6 mmGökunge, the printed circuit board in 3D

    Gökunge

    TweetyDaBird/Gokunge

    274 parts
  • 2 layers133.4 × 117.1 mmRefleXion X65, the printed circuit board in 3D

    RefleXion X65

    TweetyDaBird/RefleXion-65

    Ortho Split Keyboard

    176 parts
  • 2 layers133.4 × 102 mmRefleXion Grid, the printed circuit board in 3D

    RefleXion Grid

    TweetyDaBird/RefleXion-Grid

    Minimal footprint Split Ortho Keyboard with RP2040 MCU and USB link

    185 parts
  • 2 layers17.8 × 33.9 mmFrood, the printed circuit board in 3D

    Frood

    piit79/Frood

    Microcontroller module based on a RP2040 compatible with Elite-C / nice!nano

    44 parts78GPL-3.0
  • 4 layers137 × 141 mmPcb panel, the printed circuit board in 3D

    Pcb panel

    0xCB-dev/0xCB-1337

    Mechanical macropad with OLED running QMK

    485 parts61
  • 4 layers227.5 × 75.2 mmNehan42, the printed circuit board in 3D

    Nehan42

    skeletonkbd/Nehan

    Minimal 30% keyboard PCB and Case Project

    183 partsCERN-OHL-S-2.0
  • 2 layers304.3 × 108.3 mmNyx, the printed circuit board in 3D

    Nyx

    HorrorTroll/Nyx

    65% layout PCB with compatible many UDB position

    316 parts1GPL-2.0

Questions

How big is the Chameleon v1 0 PCB?

It measures 226 × 92 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Chameleon v1 0 use?

205 parts, built around the RP2040, SN74LV1T34DBV, W25Q32JVUUIQ and SPX3819M5-L-3-3/TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Chameleon v1 0 KiCad files?

From the TweetyDaBird/Fat-Chameleon repository on GitHub, at the commit this page was made from: the board is PCB/v1.00/Chameleon v1_0.kicad_pcb and its schematic PCB/v1.00/Chameleon v1_0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Chameleon v1 0 design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).