
Flow3r pot
timonsku/flow3r-pot
Helper tool for running UART over USB-C SBU pins for embedded debugging purposes

Quokka 6502 Microprocessor Trainer
Quokka is an open-source printed circuit board by ChrisPVille, from the ChrisPVille/quokka repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 228.6 × 184.1 mm with 355 parts on 492 nets, routed with 6,218 tracks and 738 vias.
It is built around the 74HCT245, W25Q64JVSSIM and 74LVC4245AD, with the LDL1117S12R, LDL1117S25R and USBLC6-2SC6 among its other parts. Its parts include 98 resistors, 89 capacitors, 37 diodes, 31 ICs and 30 switches. It belongs with the STM32 and FPGA and CPLD boards of this library.
Quokka 6502 Microprocessor Trainer

| Qty | Value | Footprint | References |
|---|---|---|---|
| 54 | 1u | Capacitor_SMD:C_0603_1608Metric | C1101, C1201, C1204, C1205, C1206, C1401, C1402, C1403, C1404, C1405, C1406, C1407, C1408, C1409, C1410, C1411 +38 |
| 46 | 160 | Resistor_SMD:R_1206_3216Metric | R201, R609, R610, R611, R612, R613, R614, R615, R616, R617, R618, R619, R620, R621, R622, R623 +30 |
| 36 | 4K7 | Resistor_SMD:R_0603_1608Metric | R301, R302, R601, R602, R603, R1201, R1202, R1301, R1304, R1401, R1403, R1405, R1406, R1407, R1501, R1502 +20 |
| 30 | SW_SPST | Button_Switch_Keyboard:SW_Cherry_MX1A_1.00u_PCB | SW901, SW902, SW903, SW904, SW905, SW906, SW907, SW908, SW909, SW910, SW911, SW912, SW913, SW914, SW915, SW916 +14 |
| 24 | Q_PMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q201, Q601, Q602, Q603, Q604, Q605, Q606, Q607, Q608, Q701, Q702, Q703, Q704, Q705, Q706, Q707 +8 |
| 21 | LED_Small | LED_SMD:LED_0805_2012Metric | D403, D404, D405, D406, D407, D408, D409, D410, D801, D802, D803, D804, D805, D806, D807, D808 +5 |
| 13 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C235, C237, C239, C241, C243, C245, C247, C249, C304, C305, C306, C1202, C1301 |
| 11 | 14-segment | quokka:14-segment | D601, D602, D603, D604, D701, D702, D703, D704, D817, D818, D819 |
| 9 | 390 | Resistor_SMD:R_0603_1608Metric | R401, R402, R403, R404, R405, R406, R407, R408, R1302 |
| 9 | Fiducial | Fiducial:Fiducial_1mm_Dia_2.54mm_Outer_CopperTop | FID101, FID102, FID103, FID107, FID108, FID109, FID110, FID111, FID112 |
| 9 | TPIC6D595 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U601, U602, U603, U701, U702, U703, U801, U802, U803 |
| 8 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C215, C217, C218, C222, C226, C230, C301, C302 |
| 8 | 74LVC4245A | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U401, U1401, U1402, U1403, U1404, U1405, U1406, U1407 |
| 6 | Mounting_Hole | MountingHole:MountingHole_4.5mm | MK101, MK102, MK103, MK104, MK105, MK106 |
| 6 | Test_Point | TestPoint:TestPoint_Pad_D1.5mm | TP201, TP202, TP203, TP204, TP205, TP206 |
| 5 | Q_NPN_BEC | Package_TO_SOT_SMD:SOT-23 | Q1201, Q1301, Q1401, Q1402, Q1403 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R1203, R1305, R1402, R1404 |
| 4 | 22u | Capacitor_SMD:C_0805_2012Metric | C207, C208, C211, C212 |
| 4 | 74HCT245 | Package_SO:SSOP-20_4.4x6.5mm_P0.65mm | U1201, U1203, U1204, U1205 |
| 3 | 10u | Capacitor_SMD:C_1206_3216Metric | C205, C210, C1203 |
| 3 | Fiducial | Fiducial:Fiducial_1mm_Dia_2.54mm_Outer_CopperBottom | FID104, FID105, FID106 |
| 2 | 100u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C209, C213 |
| 2 | 1n | Capacitor_SMD:C_1206_3216Metric | C202, C203 |
| 2 | 22n | Capacitor_SMD:C_0603_1608Metric | C201, C206 |
| 2 | 4.7u | Inductor_SMD:L_Taiyo-Yuden_NR-60xx | L202, L203 |
| 2 | 68 | Resistor_SMD:R_0603_1608Metric | R1303, R1306 |
| 2 | Conn_01x09 | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J303, J401 |
| 2 | DF5A6.8F | Package_TO_SOT_SMD:SOT-353_SC-70-5 | D401, D402 |
| 2 | D_Schottky | Diode_SMD:D_SOD-123F | D202, D203 |
| 2 | TS3001x | Package_DFN_QFN:UQFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm | U201, U202 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R303 |
| 1 | 6502 | Package_DIP:DIP-40_W15.24mm | U1202 |
| 1 | 68u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C204 |
| 1 | ARM SWD | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J301 |
| 1 | AS6C8008 | quokka:AS6C8008-SOIC-44 | U1101 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_CUI_PJ-102AH_Horizontal | J201 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J302 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J304 |
| 1 | DIN96 | quokka:DIN-8609-2030 | J1001 |
| 1 | D_TVS | Diode_SMD:D_SMA | D201 |
| 1 | FPGA JTAG | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1301 |
| 1 | Jumper_NC_Small | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1201 |
| 1 | LDL1117S12R | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U204 |
| 1 | LDL1117S25R | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U203 |
| 1 | Polyfuse | Fuse:Fuse_2920_7451Metric | F201 |
| 1 | Power Choke | quokka:CM2021Y330R-10 | L201 |
| 1 | SG7050CAN 25.0Mhz | Oscillator:Oscillator_SMD_SeikoEpson_SG8002CA-4Pin_7.0x5.0mm | X1301 |
| 1 | STM32F072CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U301 |
| 1 | USB Choke | quokka:DLW21H | L301 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U302 |
| 1 | USB_B | quokka:UE27BCX4 | J305 |
| 1 | W25Q64JVSSIM | Package_SO:SOIJ-8_5.3x5.3mm_P1.27mm | U1501 |
| 1 | WireJumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1202 |
| 1 | XC3S200-TQ144 | Package_QFP:LQFP-144_20x20mm_P0.5mm | U205 |

timonsku/flow3r-pot
Helper tool for running UART over USB-C SBU pins for embedded debugging purposes


dataehora/beatconfused
A small web studio of fast, elegant, install-free music tools. Every tool is plain HTML, CSS and vanilla JavaScript with the Web Audio API — no build step, no dependencies, no accounts, works offline after first load.

roberto314/Unicomp2
A modular 8-bit Computer able to recreate (nearly) every Retro computer of the late 70s to mid 80s.

ImperialSpaceSociety/Project-Mach-1
This is the code and hardware designs for the high powered rocketry project at the Imperial College Space Society

tahnok/hummingbird
PCB design files for the Hummingbird kite flight telemetry module


It measures 228.6 × 184.1 mm and has 4 copper layers, 1.6 mm thick.
355 parts, built around the 74HCT245, W25Q64JVSSIM, 74LVC4245AD and LDL1117S12R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ChrisPVille/quokka repository on GitHub, at the commit this page was made from: the board is board/quokka.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).