
Tank level indicator board
tudsat-rocket/tank_level_indicator_board
Flex PCB to be mounted to the outside of the rocket's propellant tank to measure it's fillig level.

general board for various sensor inputs and outputs. It is run by an STM32F103
Io board is an open-source printed circuit board by tudsat-rocket, from the tudsat-rocket/io_board repository on GitHub. It is a 4-layer board of 60 × 60 mm with 187 parts on 131 nets, routed with 1,537 tracks and 520 vias.
It is built around the W25Q128JVPIQ, AO3400A and AOSP21321, with the KMR721NGLFS among its other parts. Its parts include 74 resistors, 43 capacitors, 16 diodes, 16 connectors and 9 ICs. It belongs with the sensors and measurement boards and the STM32 boards of this library.
The I/O module is built as a general board for various sensor inputs and outputs. It is run by an STM32F103.
The module features 4 output connectors, each usable as a servo output or 2 switchable outputs, powered by one of a variety of power sources. They also feature a variety of communication ports, allowing connection to UART and I2C systems, as well as use of the STM32's ADC.
The outputs of the I/O module can be powered directly from the FC battery, a 5V line powered by a linear regulator, an external source such as the charge bus or an auxiliary battery, or an onboard, programmable boost converter.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 1k | Resistor_SMD:R_0402_1005Metric | R3, R5, R14, R17, R22, R25, R26, R27, R28, R29, R30, R69, R70, R71, R72, R73 +1 |
| 16 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C5, C6, C18, C20, C29, C30, C31, C32, C33, C34, C35, C38, C41 |
| 16 | 12k | Resistor_SMD:R_0402_1005Metric | R49, R50, R51, R52, R53, R54, R57, R58, R59, R60, R61, R62, R63, R64, R67, R68 |
| 12 | 10n | Capacitor_SMD:C_0402_1005Metric | C7, C10, C21, C22, C23, C24, C36, C37, C39, C40, C42, C43 |
| 9 | red | LED_SMD:LED_0603_1608Metric | D2, D3, D4, D5, D6, D11, D12, D15, D16 |
| 8 | 100 | Resistor_SMD:R_0402_1005Metric | R12, R13, R15, R16, R20, R21, R23, R24 |
| 5 | 22R | Resistor_SMD:R_0402_1005Metric | R7, R8, R11, R38, R39 |
| 5 | 5k1 | Resistor_SMD:R_0402_1005Metric | R34, R35, R36, R37, R44 |
| 5 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric | C11, C12, C13, C17 |
| 4 | 330 | Resistor_SMD:R_0402_1005Metric | R55, R56, R65, R66 |
| 4 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R18, R19 |
| 4 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q9, Q10, Q11, Q12 |
| 4 | AOSP21321 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1, Q2, Q5, Q6 |
| 4 | D | frodo_io_module:D_SOD-123FL | D9, D10, D13, D14 |
| 4 | JST-GH 4Pin | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J5, J6, J8, J9 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 15k | Resistor_SMD:R_0402_1005Metric | R41, R42, R43 |
| 3 | 15m | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R32, R33 |
| 3 | 2k2 | Resistor_SMD:R_0402_1005Metric | R45, R46, R47 |
| 3 | INA181A1 | Package_TO_SOT_SMD:SOT-23-6 | U7, U8, U9 |
| 3 | KMR721NGLFS | Button_Switch_SMD:SW_SPST_TS-1088-xR020 | SW1, SW2, SW3 |
| 3 | ~ | stigma:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J11, J12, J14 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R6, R31 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C25, C26 |
| 2 | 120, DNP | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R40, R48 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C8, C9 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C15, C16 |
| 2 | 5A | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F2, F3 |
| 2 | 700mV@5A | Diode_SMD:D_SMA | D1, D7 |
| 2 | Conn_02x04_Top_Bottom | Connector_Molex:Molex_Micro-Fit_3.0_43045-0800_2x04_P3.00mm_Horizontal | J1, J2 |
| 2 | JST-GH 4Pin | Connector_JST:JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical | J7, J10 |
| 2 | MCP2562-E-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5, U6 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | TH1 |
| 1 | 10u | Capacitor_SMD:C_0402_1005Metric | C27 |
| 1 | 120R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 171050601 | Package_TO_SOT_SMD:TO-263-7_TabPin8 | U1 |
| 1 | 17k4 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 2.2uH | frodo_io_module:L_Wurth_WE-PD2-5848 | L1 |
| 1 | 220u | Capacitor_SMD:CP_Elec_6.3x4.5 | C14 |
| 1 | 22u | Capacitor_SMD:C_0603_1608Metric | C28 |
| 1 | 3A | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 3k3 | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 470n | Capacitor_SMD:C_0603_1608Metric | C19 |
| 1 | 4u7 | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 8MHz 12pF | Crystal:Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | AZ1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J13 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x03_P1.27mm_Vertical_SMD | J3 |
| 1 | STM32F105RCTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | TC2050 | Connector:Tag-Connect_TC2050-IDC-FP_2x05_P1.27mm_Vertical | J16 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J15 |
| 1 | W25Q128JVP | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U4 |
| 1 | ~ | Diode_SMD:D_SOD-123 | D8 |

tudsat-rocket/tank_level_indicator_board
Flex PCB to be mounted to the outside of the rocket's propellant tank to measure it's fillig level.



bluesatunsw/rocketry-datasat
Cubesat-shaped data collection payload for Rocketry's Griffon rocket

sinara-hw/Kirdy_laser_drv
Low Noise Precision Laser Diode Driver with Built-in TEC Temperature Controller



It measures 60 × 60 mm and has 4 copper layers, 1.6 mm thick.
187 parts, built around the W25Q128JVPIQ, AO3400A, AOSP21321 and KMR721NGLFS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tudsat-rocket/io_board repository on GitHub, at the commit this page was made from: the board is io_board.kicad_pcb and its schematic io_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask tudsat-rocket before reusing the design.