6 layers39.5 × 39.5 mm
6 layers22 × 42 mm
LEVIA H7 M2
piecol/LEVIA_H7_M26- Size
- 22 × 42 mm
- Copper layers
- 6
- Thickness
- 0.8 mm
- Parts
- 106
- Nets
- 178
- Pads
- 510
- Tracks, vias
- 1,195, 367
- Pours
- 296
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 6 Sep 2026
- Updated
- 7 Sep 2026
Overview
LEVIA H7 M2 is an open-source printed circuit board by piecol, from the piecol/LEVIA_H7_M2 repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 6-layer board of 22 × 42 mm with 106 parts on 178 nets, routed with 1,195 tracks and 367 vias.
It is built around the STM32H743VIH6, MAX-M10S-00B and SIT1051TK/3, with the AT7456ELAH, DPS368XTSA1 and IST8310 among its other parts. Its parts include 42 capacitors, 32 resistors, 11 ICs, 3 diodes and 3 connectors. It belongs with the STM32 boards of this library.
Main components
12
STM32H743VIH6
TFBGA-100-40℃~+85℃ 1.62V~3.6V 1MB 2MB 32 Bit 480MHz 82 ARM Cortex-M7 Built-in FLASH TFBGA-100 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontroller Units (MCUs/MPUs/SOCs)
MAX-M10S-00B
LCC-18(9.7x10.1)LCC-18(9.7x10.1) GNSS Modules ROHSu-bloxGNSS Modules
SIT1051TK/3
HVSON-8-EP(3x3)-40℃~+150℃ 1 4.5V~5.5V 5Mbps 70mA CAN FD Transceiver Low-power mode、Wake-up function、TXD dominant timeout、Undervoltage Protection、Thermal shutdown protection、Short-Circuit Protection、Silent mode、Integrated level shifting HVSON-8-EP(3x3) CAN Transceivers ROHSSITCAN Transceivers
AT7456ELAH
LGA-16(4x6.8)-40℃~+85℃@(Ta) 3.15V~5.25V Driver Non-volatile configuration storage SPI LGA-16(4x6.8) Video Interface ICs ROHSZHONGKEWEIVideo Interface ICs
DPS368XTSA1
VLGA-8(2x2.5)-40℃~+85℃ 0.5pa/K 1.7V~3.6V 100pa 27.6ms 30Kpa~1.2bar 500nA 6pa I2C、SPI No VLGA-8(2x2.5) Pressure Sensors ROHSInfineon TechnologiesPressure Sensors
IST8310
LGA-16(3x3)-40℃~+85℃ 14bit 600uA I2C ±1.6mT ±2.5mT LGA-16(3x3) 3D Magnetic SensorsiSentek3D Magnetic Sensors
W25Q128JVPIQ
WSON-8-EP(5x6)-40℃~+85℃ 100,000 cycles 10uA 120ms@(32KB) 128Mbit 133MHz 2.7V~3.6V 20 Years Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection、Power lock protection SPI WSON-8-EP(5x6) NOR FLASH ROHSWinbond ElecNOR FLASH
TF-028-H265
SMD-20℃~+85℃ 2.65mm Connector and Ejector MicroSD Card (TF Card) Push-Pull SMD SD Card / Memory Card Connector ROHSHanbo ElectronicSD Card / Memory Card Connector
BMI270
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 2KB 3.5uA Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSBosch SensortecAccelerometers
4D02WGJ0100TCE
0402x410Ω 4 62.5mW 8 ±200ppm/℃ ±5% 0402x4 Resistor Networks, Arrays ROHSUNI-ROYALResistor Networks & Arrays
LQG15HS2N7S02D
0402150mΩ 2.7nH 6GHz 800mA 8@100MHz Multilayer inductor 0402 Inductors (SMD) ROHSMurataInductors (SMD)
FCM1608KF-601T02
06031 200mA 500mΩ 600Ω@100MHz ±25% 0603 Ferrite Beads ROHSTA-I TechFerrite Beads
README
README.mdLEVIA_H7_M2
Parts
106| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C12, C13, C20, C21, C22, C25, C26, C27, C30, C31, C34, C35, C36, C37, C40 +6 |
| 16 | 10K | Resistor_SMD:R_0402_1005Metric | R3, R7, R16, R18, R19, R20, R26, R27, R29, R30, R31, R32, R33, R34, R45, R46 |
| 6 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C5, C15, C28, C29, C38, C41 |
| 4 | 220R | Resistor_SMD:R_0402_1005Metric | R12, R13, R14, R44 |
| 4 | 4.7K | Resistor_SMD:R_0402_1005Metric | R1, R2, R24, R25 |
| 4 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C16, C17, C18, C19 |
| 4 | TestPoint_Small | TestPoint:TestPoint_Pad_D1.0mm | TP3, TP4, TP5, TP6 |
| 3 | 10n | Capacitor_SMD:C_0402_1005Metric | C32, C33, C44 |
| 3 | 1u | Capacitor_SMD:C_0402_1005Metric | C6, C10, C39 |
| 2 | 100K | Resistor_SMD:R_0402_1005Metric | R17, R28 |
| 2 | 10R | Resistor_SMD:R_Array_Concave_4x0402 | RN1, RN2 |
| 2 | 10R | Resistor_SMD:R_0402_1005Metric | R43, R48 |
| 2 | 10u | Capacitor_SMD:C_0402_1005Metric | C23, C24 |
| 2 | 2.2u | Capacitor_SMD:C_0402_1005Metric | C11, C14 |
| 2 | 75R | Resistor_SMD:R_0402_1005Metric | R21, R22 |
| 2 | AP7361C-33FGE-7 | EasyEDA:DFN-8_L3.0-W3.0-P0.65-BL-EP | U3, U4 |
| 2 | BMI270 | EasyEDA:LGA-14_L3.0-W2.5-P0.50-BR | U7, U8 |
| 1 | 120R | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 27nH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 600Ω@100MHz | Inductor_SMD:L_0402_1005Metric | FB1 |
| 1 | 8MHz | EasyEDA:OSC-SMD_3P-L3.2-W1.3-P1.20-L | Y1 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | AT7456ELAH | EasyEDA:LGA-16_L6.8-W4.0-P0.65-TL-2EP | U5 |
| 1 | CONMHF4-SMD-G-T | EasyEDA:IPEX-SMD_4P-L1.8-W1.7-LS2.0-1 | CN1 |
| 1 | DPS368XTSA1 | EasyEDA:LGA-8_L2.5-W2.0-P0.65-TR_DPS368 | U10 |
| 1 | IST8310 | EasyEDA:LGA-16_L3.0-W3.0-P0.50-BL_SQ | U9 |
| 1 | LEVIA_CORE_M2_B | LEVIA_M2:LEVIA_CORE_M2_B_KEY_2242-B | J2 |
| 1 | MAX-M10S | RF_GPS:ublox_MAX | U11 |
| 1 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | PESD2CAN | PCM_Package_TO_SOT_SMD_AKL:SOT-23 | D2 |
| 1 | RKCGG140SMTRLFS | EasyEDA:SW-SMD_4P-L3.0-W2.6-P1.80-LS3.5 | SW1 |
| 1 | SIT1051TK/3 | EasyEDA:HVSON-8_L3.0-W3.0-P0.65-BL-EP | U6 |
| 1 | STM32H743VIHx | Package_BGA:TFBGA-100_8x8mm_Layout10x10_P0.8mm | U1 |
| 1 | SolderJumper_2_Open | _pico:SolderJumper_Mini | JP1 |
| 1 | TF-028-H265 | EasyEDA:TF-SMD_TF-021B-H265 | J1 |
| 1 | TJ-S3806SW1TGLC6FRGB-A5 | EasyEDA:LED-SMD_6P-L4.5-W1.0_TJ-S3806SW1TGLC6F | LED1 |
| 1 | W25Q128JVPIQTR | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4mm | U12 |
| 1 | XL-1005UBC_C22355736 | LED_SMD:LED_0402_1005Metric | D3 |
| 1 | XL7EL89COI-111YLC-27M | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y2 |
The 105 most common of 106 parts.
Similar boards
- 6 layers36.5 × 36.5 mm
H743 Ardupilot
OliviezGit/FC_01
Le dossier composants contient les fiches techniques PDF, bibliothèques locales, STEP, vues de contrôle et la nomenclature France du 27/09/2026.
156 partsCERN-OHL-S-2.0 - 6 layers51.2 × 25.8 mm
FPGA board
openconcepts-ar/accel2d
This project aims to provide a graphics server system based on hardware accelerated graphics, and a easy way to develop the graphics primitives.
165 parts1 - 6 layers36 × 36 mm
- 4 layers50 × 45 mm
FC H743
CosShin/FC_AniH743
Trái tim của bo mạch là vi điều khiển STM32H743VIH6 (ARM Cortex-M7 @ 480 MHz), kết hợp cụm cảm biến quán tính kép Dual Bosch BMI088 độc lập chống rung cơ học, cảm biến khí áp độ chính xác cao SPL06-001, bộ nhớ lưu trữ…
136 partsMIT - 2 layers27 × 24.7 mm
- 2 layers173.2 × 54 mm
Microcard
Volkov997/pen-card
RF Pentesting tool, but small enough for your wallet. Features: Wifi & Bluetooth, NFC, IR, (Sub Ghz, Planned)
138 parts5GPL-2.0 - 6 layers90 × 90 mm
Cansat
DevKiDCosmo/SATELLITE-EDGE-MODULE
A satellite edge module ready for competition
220 parts2GPL-3.0
Questions
How big is the LEVIA H7 M2 PCB?
It measures 22 × 42 mm and has 6 copper layers, 0.8 mm thick.
What parts does the LEVIA H7 M2 use?
106 parts, built around the STM32H743VIH6, MAX-M10S-00B, SIT1051TK/3 and AT7456ELAH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LEVIA H7 M2 KiCad files?
From the piecol/LEVIA_H7_M2 repository on GitHub, at the commit this page was made from: the board is LEVIA_H7_M2.kicad_pcb and its schematic ANALOG_VTX.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LEVIA H7 M2 design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).