2 layers25.8 × 10.3 mm
4 layers49.5 × 99.5 mm
Waberinator hw2
M-Welsch/waberinatorLED driver for LARP ambient lighting
- Size
- 49.5 × 99.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 120
- Nets
- 183
- Pads
- 606
- Tracks, vias
- 955, 280
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 29 May 2023
- Updated
- 26 Jul 2024
Overview
Waberinator hw2 is an open-source printed circuit board by M-Welsch, from the M-Welsch/waberinator repository on GitHub. It is a 4-layer board of 49.5 × 99.5 mm with 120 parts on 183 nets, routed with 955 tracks and 280 vias.
It is built around the ESP32-S3-WROOM-1-N8, ESP32-WROOM-32 and LM73606QRNPRQ1, with the AMS1117-3.3, SD103CW-E3-08 and AOSP21321 among its other parts. Its parts include 39 capacitors, 31 resistors, 9 ICs, 9 transistors and 6 connectors. It belongs with the ESP32 and STM32 boards of this library.
Main components
6
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
LM73606QRNPRQ1
WQFN-30-EP(4x6)-40℃~+125℃@(TJ) 1 15uA 2.2MHz 3.5V~36V 6A Adjustable Buck Buck Built-in Yes WQFN-30-EP(4x6) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SD103CW-E3-08
SOD-123Schottky DiodesVishay Intertechnology
AOSP21321
SOIC-8-55℃~+150℃ 1 P-Channel 1.18nF 11A 14mΩ@10V 155pF 2.3V 3.1W 30V 34nC@10V SOIC-8 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
README
readme.mdWaberinator
Ambient LED driver unit for this guy: https://www.deviantart.com/seggos-artworks
Parts
120| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C4, C6, C7, C8, C9, C16, C17, C20, C28, C30, C32, C33, C35 |
| 10 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R7, R9, R11, R12, R13, R17, R19, R24 |
| 7 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R8, R10, R20, R21 |
| 7 | FerriteBead | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | FB1, FB2, FB3, FB4, FB5, FB6, FB7 |
| 6 | 1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R26, R27, R30, R31, R34, R35 |
| 6 | 56µF | Capacitor_SMD:C_Elec_5x5.8 | C10, C24, C25, C36, C37, C38 |
| 6 | SISHA04DN-T1-GE3 | Package_TO_SOT_SMD:LFPAK33 | Q2, Q3, Q4, Q5, Q6, Q7 |
| 5 | 1µF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C27, C29, C31, C39 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R18, R28 |
| 3 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13, C14, C15 |
| 3 | 10µF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C11, C23, C26 |
| 3 | Conn_01x04 | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J27, J28, J29 |
| 3 | MCP14A0304xMNY | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5, U6, U7 |
| 2 | 120 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R16 |
| 2 | 470nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C19, C22 |
| 2 | Q_NPN_BEC | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q8, Q10 |
| 2 | SD103CW-E3-08 | Diode_SMD:D_SOD-123 | D2, D4 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2 |
| 2 | ~ | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C5 |
| 1 | 100µF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C34 |
| 1 | 14.3k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22 |
| 1 | 2.2µF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | CVCC1 |
| 1 | 22µF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C18 |
| 1 | 24,9k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 47nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12 |
| 1 | 5k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25 |
| 1 | 6.8pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C21 |
| 1 | 744325330 | Inductor_SMD:L_Bourns_SRP1038C_10.0x10.0mm | L1 |
| 1 | 824501121 | Diode_SMD:D_SOD-128 | D1 |
| 1 | 95k3 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RT1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | AOSP21321 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | Brightness | g7_hmi:poti_3310C-025-103L | RV1 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J7 |
| 1 | Depth | g7_hmi:poti_3310C-025-103L | RV3 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U9 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U8 |
| 1 | Frequency | g7_hmi:poti_3310C-025-103L | RV2 |
| 1 | LM73606QRNPRQ1 | g7_ic:30-WFQFN-RNP0030A | U3 |
| 1 | LM75B | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT2 |
| 1 | RGB LED | LED_THT:LED_D5.0mm-4_RGB_Wide_Pins | D3 |
| 1 | STM32F030R8Tx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | sw_te_1-1825027-1 | g7_hmi:sw_te_1-1825027-1 | SW2 |
| 1 | ~ | Fuse:Fuse_2512_6332Metric_Pad1.52x3.35mm_HandSolder | F1 |
More from M-Welsch/waberinator
1Similar boards
- 4 layers114.3 × 114 mm
- 2 layers92 × 88 mm
Battery Board
bluesatunsw/rocketry-datasat
Cubesat-shaped data collection payload for Rocketry's Griffon rocket
34 parts2GPL-3.0 - 4 layers162.3 × 100 mm
Kirdy
sinara-hw/Kirdy_laser_drv
Low Noise Precision Laser Diode Driver with Built-in TEC Temperature Controller
513 parts1 - 4 layers60 × 60 mm
Io board
tudsat-rocket/io_board
general board for various sensor inputs and outputs. It is run by an STM32F103
187 parts1 - 2 layers100 × 100 mm
- 2 layers117.5 × 55 mm
Generic module
monsterzack5/AutoMato
A Car based automation framework, fully integrated with Node-Red!
73 parts1 - 2 layers141 × 66.7 mm
- 2 layers90 × 76.5 mm
Questions
How big is the Waberinator hw2 PCB?
It measures 49.5 × 99.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Waberinator hw2 use?
120 parts, built around the ESP32-S3-WROOM-1-N8, ESP32-WROOM-32, LM73606QRNPRQ1 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Waberinator hw2 KiCad files?
From the M-Welsch/waberinator repository on GitHub, at the commit this page was made from: the board is pcb/waberinator_controlboard/design/Waberinator_hw2.kicad_pcb and its schematic pcb/waberinator_controlboard/design/Waberinator_hw2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Waberinator hw2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask M-Welsch before reusing the design.