Skip to the content
2 layers50 × 59.2 mmTank level indicator board, the printed circuit board in 3D

Flex PCB to be mounted to the outside of the rocket's propellant tank to measure it's fillig level.

Size
50 × 59.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
80
Nets
84
Pads
312
Tracks, vias
562, 332
Pours
4
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
8 May 2025
Updated
10 Jul 2026

Overview

Tank level indicator board is an open-source printed circuit board by tudsat-rocket, from the tudsat-rocket/tank_level_indicator_board repository on GitHub. It is a 2-layer board of 50 × 59.2 mm with 80 parts on 84 nets, routed with 562 tracks and 332 vias.

It is built around the L7805, TPD4E1U06DBV and KMR721NGLFS, with the FFC3B07-12-T among its other parts. Its parts include 30 capacitors, 21 resistors, 5 ICs, 5 diodes and 5 connectors. It belongs with the STM32 boards of this library.

Main components

4

README

README.md

rapid_tank_level_indicator

Flex PCB to be mounted to the outside of the rocket's propellant tank to measure it's fillig level.

Parts

80
QtyValueFootprintReferences
121uCapacitor_SMD:C_0402_1005MetricC8, C9, C13, C14, C18, C19, C22, C23, C26, C27, C28, C30
10100nCapacitor_SMD:C_0402_1005MetricC6, C15, C20, C32, C33, C34, C35, C36, C37, C38
1010kResistor_SMD:R_0402_1005MetricR4, R5, R6, R7, R9, R10, R11, R13, R14, R17
61kResistor_SMD:R_0402_1005MetricR2, R3, R12, R15, R16, R25
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4
4redLED_SMD:LED_0603_1608MetricD3, D4, D5, D7
322Resistor_SMD:R_0402_1005MetricR41, R46, R47
210nCapacitor_SMD:C_0402_1005MetricC7, C10
210pCapacitor_SMD:C_0402_1005MetricC21, C31
2Conn_02x04_Top_BottomConnector_Molex:Molex_Micro-Fit_3.0_43045-0800_2x04_P3.00mm_HorizontalJ2, J3
2KMR721NGLFSButton_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2SW1, SW2
1100kResistor_SMD:R_0402_1005MetricR8
110uCapacitor_SMD:C_0402_1005MetricC16
1120, DNPResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR40
1120RInductor_SMD:L_0603_1608MetricFB1
122uCapacitor_SMD:C_0402_1005MetricC17
1330nCapacitor_SMD:C_0603_1608MetricC11
13AFuse:Fuse_0603_1608Metric_Pad1.05x0.95mm_HandSolderF1
13V3TestPoint:TestPoint_Pad_D1.5mmTP_3V3
14.7uCapacitor_SMD:C_0402_1005MetricC1
15VTestPoint:TestPoint_Pad_D1.5mmTP_5V1
18MHz 12pFCrystal:Crystal_SMD_5032-4Pin_5.0x3.2mmY1
1AZ1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U5
1CAN_HTestPoint:TestPoint_Pad_D1.5mmTP_CAN_H1
1CAN_LTestPoint:TestPoint_Pad_D1.5mmTP_CAN_L1
1Conn_01x04_PinConnector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical_SMD_Pin1LeftJ1
1DDiode_SMD:D_SMAD16
1FFC3B07-12-Tcustom_parts_lib:FFC3B0712TJ5
1L7805Package_TO_SOT_SMD:TO-252-2U1
1LOGOfrodo_io_module:rapid_logoG***
1MCP2562-E-SNPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU16
1STM32F105RCTxPackage_QFP:LQFP-64_10x10mm_P0.5mmU3
1TC2050Connector:Tag-Connect_TC2050-IDC-FP_2x05_P1.27mm_VerticalJ17
1TPD4E1U06Package_TO_SOT_SMD:SOT-563U11

More from tudsat-rocket/tank_level_indicator_board

1
  • 2 layers13 × 583.2 mmTank level indicator sensor 58cm, the printed circuit board in 3D

    Tank level indicator sensor 58cm

    tudsat-rocket/tank_level_indicator_board

    Flex PCB to be mounted to the outside of the rocket's propellant tank to measure it's fillig level.

    21 parts

Similar boards

  • 4 layers40 × 40 mmStigma core board, the printed circuit board in 3D

    Stigma core board

    tudsat-rocket/stigma

    core board and mission board for a new flight computer

    93 parts
  • 4 layers60 × 60 mmIo board, the printed circuit board in 3D

    Io board

    tudsat-rocket/io_board

    general board for various sensor inputs and outputs. It is run by an STM32F103

    187 parts1
  • 4 layers78 × 95 mmPower board, the printed circuit board in 3D

    Power board

    tudsat-rocket/power_board

    The battery boards for the Rapid rockets

    160 parts3
  • 2 layers38.6 × 90.3 mmBioElectricalSensor, the printed circuit board in 3D

    BioElectricalSensor

    CGrassin/biosignals

    Board for the acquisition of bio-potentials (EMG, ECG, EEG, etc.).

    107 parts15MIT
  • 2 layers386 × 101.5 mmSlim style PCB, the printed circuit board in 3D

    Slim style PCB

    Neil-de-grass-eating-Bisson/Canvas-Mahjong-Keyboards

    Both Hi and Low profile 65% left hand numberpad keyboard files.

    197 parts1
  • 6 layers36 × 77.5 mmMariposa, the printed circuit board in 3D

    Mariposa

    coquette-keyboard/pcb-mariposa

    coquette keyboard microcontroller board

    88 partsEUPL-1.2
  • 2 layers144.3 × 115 mmFrodo fancyfins, the printed circuit board in 3D

    Frodo fancyfins

    tudsat-rocket/rapid_fancyfins

    PCB fins for the FRoDO-M rocket

    112 parts
  • 6 layers75.4 × 19.6 mmPCB0240, the printed circuit board in 3D

    PCB0240

    otvvvio/KiCross

    KiCross is a KiCAD script for crosstalk analysis

    205 partsMIT

Questions

How big is the Tank level indicator board PCB?

It measures 50 × 59.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tank level indicator board use?

80 parts, built around the L7805, TPD4E1U06DBV, KMR721NGLFS and FFC3B07-12-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tank level indicator board KiCad files?

From the tudsat-rocket/tank_level_indicator_board repository on GitHub, at the commit this page was made from: the board is board/tank_level_indicator_board.kicad_pcb and its schematic board/tank_level_indicator_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tank level indicator board design in my own project?

Its repository states no licence, so its author keeps all rights: ask tudsat-rocket before reusing the design.