
Tank level indicator board
tudsat-rocket/tank_level_indicator_board
Flex PCB to be mounted to the outside of the rocket's propellant tank to measure it's fillig level.

The battery boards for the Rapid rockets
Power board is an open-source printed circuit board by tudsat-rocket, from the tudsat-rocket/power_board repository on GitHub. It is a 4-layer board of 78 × 95 mm with 160 parts on 124 nets, routed with 1,134 tracks and 579 vias.
It is built around the BQ25798RQMR, L7805 and TPD4E1U06DBV. Its parts include 55 capacitors, 31 resistors, 13 diodes, 9 ICs and 9 connectors. It belongs with the STM32 boards of this library.
The battery board in our rockets.
| Connector | Purpose |
|---|---|
| main switch | + and - needs to be connected to enable the output on HC1, 2, 3 |
| HC1, 2, 3 | Power output |
| circumvent | short + and - to supply power to Vmain without batteries directly from charge voltage |
| Vehicle Bus 1, 2 | Communication and bus power supply |

| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100n | Capacitor_SMD:C_0402_1005Metric | C5, C10, C14, C15, C16, C18, C19, C20, C21, C22, C34, C36, C41, C49, C50, C51 +2 |
| 16 | 10u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C6, C8, C29, C31, C32, C33, C35, C42, C43, C44, C45, C46, C47, C48 |
| 13 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13 |
| 11 | 1k | Resistor_SMD:R_0402_1005Metric | R14, R16, R17, R18, R19, R20, R21, R22, R23, R35, R36 |
| 8 | 10k | Resistor_SMD:R_0402_1005Metric | R_TS_PU1, R4, R5, R11, R13, R25, R28, R32 |
| 6 | 10n | Capacitor_SMD:C_0402_1005Metric | C3, C4, C7, C9, C23, C27 |
| 6 | 22R | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R6, R7, R9 |
| 5 | Molex MicroFit 2x2 | Connector_Molex:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J1, J2, J3, J6, J7 |
| 5 | green | LED_SMD:LED_0805_2012Metric | D8, D9, D10, D11, D12 |
| 5 | ~ | Diode_SMD:D_SMA | D1, D2, D3, D4, D5 |
| 4 | 1u | Capacitor_SMD:C_0402_1005Metric | C24, C26, C53, C54 |
| 4 | 75 | Resistor_SMD:R_0603_1608Metric | R_IN1, R_IN2, R_IN3, R_IN4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | Battery_Cell | Inductor Wuerth:BAT_1043 | BAT1, BAT2, BAT3 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C25, C28 |
| 2 | 47n | Capacitor_SMD:C_0402_1005Metric | C38, C39 |
| 2 | 4u7 | Capacitor_SMD:C_0402_1005Metric | C17, C37 |
| 2 | 5A | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F2, F3 |
| 2 | Conn_02x04_Top_Bottom | Connector_Molex:Molex_Micro-Fit_3.0_43045-0800_2x04_P3.00mm_Horizontal | J4, J5 |
| 2 | red | LED_SMD:LED_0603_1608Metric | D6, D13 |
| 2 | ~ | Button_Switch_SMD:SW_SPST_TS-1088-xR020 | SW1, SW2 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R33 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R38 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric | C11 |
| 1 | 120 | Capacitor_SMD:C_0402_1005Metric | R8 |
| 1 | 120R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 1n | Capacitor_SMD:C_0402_1005Metric | C40 |
| 1 | 1u | Inductor_SMD_Wurth:L_Wurth_WE-LQSH-3012 | L1 |
| 1 | 2 | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 2.2u | Capacitor_SMD:C_0805_2012Metric | C30 |
| 1 | 20A | Fuse:Fuse_2010_5025Metric_Pad1.52x2.65mm_HandSolder | F1 |
| 1 | 20k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R37 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | 22u | Capacitor_SMD:C_1206_3216Metric | C12 |
| 1 | 2k2 | Resistor_SMD:R_0402_1005Metric | R29 |
| 1 | 30k | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 30k31 | Resistor_SMD:R_0805_2012Metric | R31 |
| 1 | 330n | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 453k | Resistor_SMD:R_0402_1005Metric | R_LD1 |
| 1 | 500R | Resistor_SMD:R_0402_1005Metric | R26 |
| 1 | 5k24 | Resistor_SMD:R_0603_1608Metric | R30 |
| 1 | 5m | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R34 |
| 1 | 68k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 8MHz 12pF | Crystal:Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | AZ1117I-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | BQ25798RQMR | BQ25798:IC_BQ25798RQMR | U6 |
| 1 | BQ7791500PWR | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U7 |
| 1 | INA181A1 | Package_TO_SOT_SMD:SOT-23-6 | U8 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-252-2 | U4 |
| 1 | LOGO | hephaistos:rapid_logo | G*** |
| 1 | MCP2562-E-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | MCP6001-OT | Package_TO_SOT_SMD:SOT-23-5 | U9 |
| 1 | STM32F105RCTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U5 |
| 1 | SWD Header | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Left | J9 |
| 1 | TC2050 | Connector:Tag-Connect_TC2050-IDC-FP_2x05_P1.27mm_Vertical | J8 |
| 1 | TPD4E1U06 | Package_TO_SOT_SMD:SOT-563 | U2 |
| 1 | Thermistor_NTC | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | TH1 |
| 1 | yellow | LED_SMD:LED_0805_2012Metric | D7 |

tudsat-rocket/tank_level_indicator_board
Flex PCB to be mounted to the outside of the rocket's propellant tank to measure it's fillig level.

CGrassin/biosignals
Board for the acquisition of bio-potentials (EMG, ECG, EEG, etc.).

Neil-de-grass-eating-Bisson/Canvas-Mahjong-Keyboards
Both Hi and Low profile 65% left hand numberpad keyboard files.



tudsat-rocket/stigma
core board and mission board for a new flight computer


Ribbit-Network/ribbit-network-frog-hardware
The sensor for the world's largest crowdsourced network of open-source, low-cost, GHG Gas Detection Sensors.
It measures 78 × 95 mm and has 4 copper layers, 1.6 mm thick.
160 parts, built around the BQ25798RQMR, L7805 and TPD4E1U06DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tudsat-rocket/power_board repository on GitHub, at the commit this page was made from: the board is power_board.kicad_pcb and its schematic control_logic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask tudsat-rocket before reusing the design.