

Frodo fancyfins
PCB fins for the FRoDO-M rocket
- Size
- 144.3 × 115 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 112
- Nets
- 114
- Pads
- 392
- Tracks, vias
- 846, 411
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Dec 2023
- Updated
- 13 Oct 2025
Overview
Frodo fancyfins is an open-source printed circuit board by tudsat-rocket, from the tudsat-rocket/rapid_fancyfins repository on GitHub. It is a 2-layer board of 144.3 × 115 mm with 112 parts on 114 nets, routed with 846 tracks and 411 vias.
It is built around the W25Q128JVPIQ, 78L05S and AZ1117CH-3.3TRG1, with the TPD4E1U06DBV, TXB0102DCU and SK34 among its other parts. Its parts include 44 capacitors, 24 diodes, 18 ICs, 14 resistors and 3 connectors. It belongs with the STM32 boards of this library.
Main components
6W25Q128JVPIQ
WSON-8-EP(5x6)-40℃~+85℃ 100,000 cycles 10uA 120ms@(32KB) 128Mbit 133MHz 2.7V~3.6V 20 Years Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection、Power lock protection SPI WSON-8-EP(5x6) NOR FLASH ROHSWinbond ElecNOR FLASH78L05S
SOT-23-20℃~+120℃@(Tj) 1 1.7V 100mA 2mA 30V 40uV 49dB@(120Hz) 5V Fixed Over Temperature Protection、Short Circuit Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAZ1117CH-3.3TRG1
SOT-223-20℃~+125℃@(Tj) 0.003%Vout 1 1.2V@(800mA) 1.35A 10V 3.3V 4mA 70dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPD4E1U06DBV
SOT-23-6-40℃~+125℃ 0.8pF 10nA 15V 3A@8/20us 45W@8/20us 5.5V 8.5V Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS Unidirectional SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)TXB0102DCU
VSSOP-8-0.5mm-40℃~+85℃ 1 1.2V~3.6V 1.65V~5.5V 100Mbps 2 Auto Direction Detection Bidirectional CMOS CMOS Tri-State VSSOP-8-0.5mm Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersSK34
SMA1 Independent 100uA 3A 40V 550mV@3A 80A SMA Diodes - General Purpose ROHSMSKSEMIDiodes - General Purpose
Parts
112| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 3210 | fancyfins:1313210530000 | D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24 +4 |
| 14 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C6, C7, C12, C23, C25, C26, C28, C30, C36, C38, C40, C42, C44 |
| 11 | 330n | Capacitor_SMD:C_0402_1005Metric | C1, C22, C24, C27, C29, C31, C35, C37, C39, C41, C43 |
| 10 | L78L05_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U8, U9, U10, U11, U12, U14, U15, U16, U17, U18 |
| 9 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C8, C11, C14, C15, C16, C17, C18, C34 |
| 4 | 22 | Resistor_SMD:R_0402_1005Metric | R8, R9, R10, R11 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R3, R13 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C9, C13 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C32, C33 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C20, C21 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C10 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | SK34 | Diode_SMD:D_SMA | D1, D4 |
| 2 | ~ | fancyfins:card_edge_connector_2x4 | J1, J2 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C19 |
| 1 | 120, DNP | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 120R | Inductor_SMD:L_0402_1005Metric | FB1 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 3A | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 470 | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 680 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 78L05S | Package_TO_SOT_SMD:SOT-23 | U1 |
| 1 | 8MHz 12pF | Crystal:Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | AZ1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | AZ1117CH-3.3TRG1 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | CS | TestPoint:TestPoint_Pad_D2.0mm | TP1 |
| 1 | LOGO | hephaistos:rapid_logo | G*** |
| 1 | MCP2562-E-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | MISO | TestPoint:TestPoint_Pad_D2.0mm | TP3 |
| 1 | MOSI | TestPoint:TestPoint_Pad_D2.0mm | TP4 |
| 1 | SCK | TestPoint:TestPoint_Pad_D2.0mm | TP2 |
| 1 | STM32F103RCTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U5 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | TC2050 | Connector:Tag-Connect_TC2050-IDC-FP_2x05_P1.27mm_Vertical | J3 |
| 1 | TPD4E1U06 | Package_TO_SOT_SMD:SOT-563 | U7 |
| 1 | TXB0102DCU | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U3 |
| 1 | W25Q128JVP | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U13 |
| 1 | red | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | yellow | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
More from tudsat-rocket/rapid_fancyfins
2- 2 layers12 × 13 mm

- 2 layers17 × 9 mm

Similar boards
- 2 layers38.6 × 90.3 mm

BioElectricalSensor
CGrassin/biosignals
Board for the acquisition of bio-potentials (EMG, ECG, EEG, etc.).
107 parts15MIT - 4 layers78 × 95 mm

- 2 layers386 × 101.5 mm

Slim style PCB
Neil-de-grass-eating-Bisson/Canvas-Mahjong-Keyboards
Both Hi and Low profile 65% left hand numberpad keyboard files.
197 parts1 - 6 layers36 × 77.5 mm

- 4 layers60 × 130 mm

Stigma mission board hysteresis
tudsat-rocket/stigma
core board and mission board for a new flight computer
182 parts - 2 layers50 × 59.2 mm

Tank level indicator board
tudsat-rocket/tank_level_indicator_board
Flex PCB to be mounted to the outside of the rocket's propellant tank to measure it's fillig level.
80 parts - 6 layers75.4 × 19.6 mm

- 4 layers68.6 × 53.3 mm

101 PCB
ICRS/101
The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.
89 parts10CC-BY-4.0
Questions
How big is the Frodo fancyfins PCB?
It measures 144.3 × 115 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Frodo fancyfins use?
112 parts, built around the W25Q128JVPIQ, 78L05S, AZ1117CH-3.3TRG1 and TPD4E1U06DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Frodo fancyfins KiCad files?
From the tudsat-rocket/rapid_fancyfins repository on GitHub, at the commit this page was made from: the board is fancyfins/frodo_fancyfins.kicad_pcb and its schematic connector_pcb/connector_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Frodo fancyfins design in my own project?
Its repository states no licence, so its author keeps all rights: ask tudsat-rocket before reusing the design.