Skip to the content
4 layers39.5 × 28.5 mmArrythmiX, the printed circuit board in 3D

This is the main repo for the Arryhtmix Project, which aims to develop a novel, end-to-end framework for the prediction of cardiac events

Size
39.5 × 28.5 mm
Copper layers
4
Thickness
1.6 mm
Parts
40
Nets
46
Pads
172
Tracks, vias
498, 68
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
7 Aug 2025
Updated
5 Mar 2026

Overview

ArrythmiX is an open-source printed circuit board by TTF-fog, from the TTF-fog/ArrythmiX repository on GitHub. It is a 4-layer board of 39.5 × 28.5 mm with 40 parts on 46 nets, routed with 498 tracks and 68 vias.

Its parts include 17 resistors, 10 capacitors, 5 connectors, 4 ICs and 1 diode. It belongs with the nRF52 and nRF5x boards of this library.

README

README.md

Main Repo

For Blueprint Reviewers, Final Version is what our end CAD model is. Design is goose.f3d present in the same file. BOM is present in root dir, table format (collapsed) at bottom of readme and PCB folder. PCB Folder contains gerbers.zip and design files. Firmware is in firmware and software in software. Everything else is in ML or doc. Check Sections for descriptions. thank you for reviewing our project :)

This is the main repo for the Arryhtmix Project, which aims to develop a novel, end-to-end framework for the prediction of cardiac events

VERY EPIC GIF IF BROKEN PLEASE WATCH

We have developed a novel end to end pipeline for the prediction of cardiac arrests through machine learning alongside a medical device to facilitate the collection of data for the model.

The initial process takes place on the device. The single-lead AD8232 Sensor with integrated hardware high pass and low pass filters collects ECG Data from one lead with one electrode for common mode rejection. The data is read at a rate of 360 Hz by the nRF52840 using a 12-bit ADC and concurrently denoised through an integrated LSM6DS3. While the device is idle, it is kept in deep sleep mode, significantly reducing power consumption. Upon the collection of 10 data points, the buffer is dispatched using BLE to the host device.

Upon being dispatched to the host device, two models are run on it. First, an Arrhythmia classification model based on the MIT-BIH dataset and architected with a BiLSTM and Random Forest classifier returns a dataclass which describes the type of arrhythmia if any. Secondly, a novel hybrid CNN-LSTM model trained on the Sudden Cardiac Arrest Holter Database predicts ventricular fibrillation risk across four temporal categories. The models have been quantised for edge deployment and offer platform flexibility. A f-score of 99 percent and of 85 percent is obtained from both models respectively.

  • ISEF Abstract

Sections

  • Scripts
    • Miscellaneous
      • mixture of normal and vibecoded scripts made for testing
    • Rerun
      • Scripts and Blueprints for the Rerun visualizer
  • Hardware
    • PCB Documents
    • CAD Files
      • all of these are from some iteration or the other, but they should represent the totality of our cad.
      • Final Version is what our end model is. Design is goose.f3d present in the same file
  • Firmware
    • firmware for the device
  • ML
    • Our own model training stuff, and tweaked versions of other's
  • Documentation
    • Extra stuff relating to the project. Will add slide decks soon:tm:

Images

Machine Learning confusion matrix

Confusion Matrix


train and vall graphs

train and valuation graphs


Software Rerun Dashboard (No Data)

img.pngMachine


Hardware

img_2.png

img_3.png

img_4.png

img_5.png

unsoldered, sorry for bad quality


CAD Models

3D Model

click to see preview

Bill Of Materials

Bill Of Materials for PCB
JLCPCB BOM Tool - BOM Matching
BOM name:bom-JLCPCB Assembly Order.xlsxDownload Time:2025-12-03 19:28:29* Our matching results are updated in real-time, but stock and prices may change. If it's been over 24 hours, please re-match before placing your order.
PCB Assembled Qty:5Est. Total Price:11.8136
Your BOMMatched PartsOrder Information
Top DesignatorBottom DesignatorCommentFootprintJLCPCB Part #MatchesPart #ManufacturerFootprintDescriptionCategoryWarningJLCPCB Part #Product linkLib TypeQtySourceTotal Price ($)
C21nFC_0201_0603MetricSelect by Customer0201B102K500NTFH (Guangdong Fenghua Advanced Tech)02011nF 50V X7R ±10% 0201 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMultilayer Ceramic Capacitors MLCC - SMD/SMTC66942https://jlcpcb.com/partdetail/68029-0201B102K500NT/C66942Extended2020 JLCPCB0.014
C51.5nFC_0201_0603MetricSelect by CustomerGRM033R71C152KA01DMurata Electronics02011.5nF 16V X7R ±10% 0201 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMultilayer Ceramic Capacitors MLCC - SMD/SMTC161482https://jlcpcb.com/partdetail/172863-GRM033R71C152KA01D/C161482Extended2020 JLCPCB0.05
C610nFC_0201_0603MetricSelect by CustomerGRM033R61E103KA12DMurata Electronics020110nF 25V X5R ±10% 0201 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMultilayer Ceramic Capacitors MLCC - SMD/SMTC76938https://jlcpcb.com/partdetail/MurataElectronics-GRM033R61E103KA12D/C76938Extended2020 JLCPCB0.036
C7,C10.33uFC_0201_0603MetricSelect by CustomerGRM033R61E334KE15DMurata Electronics020125V 330nF ±10% 0201 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMultilayer Ceramic Capacitors MLCC - SMD/SMT1.The comment (GRM033R61E334KE15D) of this part does not match the one (0.33uF) provided in your BOM. Please confirm;C723889https://jlcpcb.com/partdetail/768943-GRM033R61E334KE15D/C723889Extended2020 JLCPCB0.388
C8,C910uFC_0402_1005MetricSelect by SystemCL05A106MQ5NUNCSamsung Electro-Mechanics040210uF 6.3V X5R ±20% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMultilayer Ceramic Capacitors MLCC - SMD/SMTC15525https://jlcpcb.com/partdetail/16204-CL05A106MQ5NUNC/C15525Basic2020 JLCPCB0.09
C10,C4,C30.1uFC_0201_0603MetricSelect by CustomerCL03A104KP3NNNCSamsung Electro-Mechanics0201100nF 10V X5R ±10% 0201 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMultilayer Ceramic Capacitors MLCC - SMD/SMT1.The comment (CL03A104KP3NNNC) of this part does not match the one (0.1uF) provided in your BOM. Please confirm;C49062https://jlcpcb.com/partdetail/50070-CL03A104KP3NNNC/C49062Extended2020 JLCPCB0.026
D1LEDLED_0603_1608MetricUnconfirmedKT-0603RHubei KENTO Elec0603-40℃+85℃ 120° 2.4V 20mA 300mcd 40mW 615nm630nm 645nm Red Water Clear 0603 LED Indication - Discrete ROHSLED Indication - Discrete1.The comment (KT-0603R) of this part does not match the one (LED) provided in your BOM. Please confirm;C2286https://jlcpcb.com/partdetail/Hubei_KENTOElec-KT0603R/C2286Basic2020 JLCPCB0.112
R1,R4,R7,R5,R6,R1510M惟R_0201_0603MetricSelect by CustomerRTT01106JTHRALEC0201-55℃~+125℃ 10MΩ 25V 50mW Thick Film Resistor ±200ppm/℃ ±5% 0201 Chip Resistor - Surface Mount ROHSChip Resistor - Surface Mount1.The comment (RTT01106JTH) of this part does not match the one (10M惟) provided in your BOM. Please confirm;C158867https://jlcpcb.com/partdetail/RALEC-RTT01106JTH/C158867Extended2222 JLCPCB0.0198
R3,R2180k惟R_0201_0603MetricSelect by CustomerRTT01184JTHRALEC0201-55℃~+125℃ 180kΩ 25V 50mW Thick Film Resistor ±200ppm/℃ ±5% 0201 Chip Resistor - Surface Mount ROHSChip Resistor - Surface Mount1.The comment (RTT01184JTH) of this part does not match the one (180k惟) provided in your BOM. Please confirm;C158738https://jlcpcb.com/partdetail/RALEC-RTT01184JTH/C158738Extended2020 JLCPCB0.068
R8360kR_0201_0603MetricSelect by CustomerRTT01364JTHRALEC0201-55℃~+125℃ 25V 360kΩ 50mW Thick Film Resistor ±200ppm/℃ ±5% 0201 Chip Resistor - Surface Mount ROHSChip Resistor - Surface Mount1.The comment (RTT01364JTH) of this part does not match the one (360k) provided in your BOM. Please confirm;C158574https://jlcpcb.com/partdetail/RALEC-RTT01364JTH/C158574Extended2020 JLCPCB0.022
R9,R13,R141M惟R_0201_0603MetricSelect by CustomerRTT011004FTHRALEC0201-55℃~+125℃ 1MΩ 25V 50mW Thick Film Resistor ±1% ±200ppm/℃ 0201 Chip Resistor - Surface Mount ROHSChip Resistor - Surface Mount1.The comment (RTT011004FTH) of this part does not match the one (1M惟) provided in your BOM. Please confirm;C102686https://jlcpcb.com/partdetail/RALEC-RTT011004FTH/C102686Extended2020 JLCPCB0.018
R12100k惟R_0201_0603MetricSelect by CustomerCR0201FH1003GLIZ Elec0201-55℃~+125℃ 100kΩ 25V 50mW Thick Film Resistor ±1% ±250ppm/℃ 0201 Chip Resistor - Surface Mount ROHSChip Resistor - Surface Mount1.The comment (CR0201FH1003G) of this part does not match the one (100k惟) provided in your BOM. Please confirm;C100127https://jlcpcb.com/partdetail/LIZElec-CR0201FH1003G/C100127Extended2020 JLCPCB0.016
R161.4m惟R_0201_0603MetricSelect by Customer0201WMF1404TEEUNI-ROYAL(Uniroyal Elec)0201-55℃~+155℃ 1.4MΩ 25V 50mW Thick Film Resistor ±1% ±200ppm/℃ 0201 Chip Resistor - Surface Mount ROHSChip Resistor - Surface MountC423737https://jlcpcb.com/partdetail/416687-0201WMF1404TEE/C423737Extended2020 JLCPCB0.028
R191kR_0402_1005MetricSelect by Customer0402WGF1001TCEUNI-ROYAL(Uniroyal Elec)0402-55℃~+155℃ 1kΩ 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSChip Resistor - Surface Mount1.The comment (0402WGF1001TCE) of this part does not match the one (1k) provided in your BOM. Please confirm;C11702https://jlcpcb.com/partdetail/12256-0402WGF1001TCE/C11702Basic2020 JLCPCB0.012
R21,R202.2KR_0402_1005MetricSelect by Customer0402WGF2201TCEUNI-ROYAL(Uniroyal Elec)0402-55℃~+155℃ 2.2kΩ 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSChip Resistor - Surface Mount1.The comment (0402WGF2201TCE) of this part does not match the one (2.2K) provided in your BOM. Please confirm;C25879https://jlcpcb.com/partdetail/26622-0402WGF2201TCE/C25879Basic2020 JLCPCB0.012
U2AD8232LFCSP_20UnconfirmedAD8232ACPZ-R7Analog DevicesLFCSP-20(4x4)-40℃+85℃ 12ppm/℃ 170uA 2V3.5V LFCSP-20(4x4) Analog Front End (AFE) ROHSAnalog To Digital Converters (ADC)1.The comment (AD8232ACPZ-R7) of this part does not match the one (AD8232) provided in your BOM. Please confirm;C43216https://jlcpcb.com/partdetail/AnalogDevices-AD8232ACPZR7/C43216Extended22 JLCPCB5.715
U3NCP1117-3.3_SOT223SOT-223-3_TabPin2Select by CustomerAMS1117-3.3Advanced Monolithic SystemsSOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 16V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsC6186https://jlcpcb.com/partdetail/Advanced_MonolithicSystems-AMS1117_33/C6186Basic22 JLCPCB0.3178
U4MAX17048G_T10SON50P200X200X80-9NSelect by SystemMAX17048G+T10Analog Devices Inc./Maxim IntegratedDFN-8-EP(2x2)-40℃+85℃ 1 2.5V4.5V 3uA I2C Lithium Battery Not Supported Not Supported DFN-8-EP(2x2) Battery Management ROHSBattery ManagementC2682616https://jlcpcb.com/partdetail/2777647-MAX17048GT10/C2682616Extended22 JLCPCB4.869
J1DNPPinSocket_1x04_P1.27mm_VerticalNo matchesNo Part Selected
J2DNPPinSocket_1x02_P2.54mm_VerticalNo matchesNo Part Selected
J3DNPPinHeader_1x03_P2.54mm_VerticalNo matchesNo Part Selected
SW1SW_SPSTSW_DIP_SPSTx01_Slide_6.7x4.1mm_W6.73mm_P2.54mm_LowProfile_JPinNo matchesNo Part Selected
U1XIAO-nRF52840-SMDXIAO-nRF52840-SMDNo matchesNo Part Selected

Parts

40
QtyValueFootprintReferences
610 mΩResistor_SMD:R_0201_0603MetricR1, R4, R5, R6, R7, R15
30.1 uFCapacitor_SMD:C_0201_0603MetricC3, C4, C10
31 mΩResistor_SMD:R_0201_0603MetricR9, R13, R14
20.33 uFCapacitor_SMD:C_0201_0603MetricC1, C7
210 uFCapacitor_SMD:C_0402_1005MetricC8, C9
2180 kΩResistor_SMD:R_0201_0603MetricR2, R3
22.2KResistor_SMD:R_0402_1005MetricR20, R21
2Conn_01x01_PinConnector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_VerticalJ4, J5
11 nFCapacitor_SMD:C_0201_0603MetricC2
11.4 mΩResistor_SMD:R_0201_0603MetricR16
11.5 nFCapacitor_SMD:C_0201_0603MetricC5
110 nFCapacitor_SMD:C_0201_0603MetricC6
1100 kΩResistor_SMD:R_0201_0603MetricR12
11kResistor_SMD:R_0402_1005MetricR19
1360 kResistor_SMD:R_0201_0603MetricR8
1AD8232AD8232:LFCSP_20U2
1Conn_01x02_SocketConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ2
1Conn_01x03_PinConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3
1Conn_01x04_SocketConnector_PinSocket_1.27mm:PinSocket_1x04_P1.27mm_VerticalJ1
1LEDLED_SMD:LED_0603_1608MetricD1
1LOGOLOGOG***
1MAX17048G_T10MAX17048G_T10:SON50P200X200X80-9NU4
1NCP1117-3.3_SOT223Package_TO_SOT_SMD:SOT-223-3_TabPin2U3
1SolderJumper_2_BridgedJumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mmJP1
1SolderJumper_3_Bridged123Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabelsJP2
1XIAO-nRF52840-SMDSeeed Studio XIAO Series Library:XIAO-nRF52840-SMDU1

Similar boards

  • 4 layers24.4 × 24.4 mmOSO SWAT C1, the printed circuit board in 3D

    OSO SWAT C1

    joeycastillo/Sensor-Watch

    A board replacement for the classic Casio F-91W wristwatch

    40 parts2.1k
  • 4 layers70 × 56 mmPi adapter hc, the printed circuit board in 3D

    Pi adapter hc

    hzeller/spixels

    Spixels - 16-SPI LED Raspberry Pi adapter with library (SPI - Pixels).

    40 parts41LGPL-3.0
  • 4 layers76.7 × 76.7 mmOS816, the printed circuit board in 3D

    OS816

    c0pperdragon/OS816

    An experimental single-board computer using the 65C816

    40 parts28
  • 4 layers30 × 30 mmCamIO, the printed circuit board in 3D

    CamIO

    intergalaktik/Extension_Boards_for_Olimex_GateMate

    Simple extension boards for Olimex GateMate FPGA Board

    40 parts20
  • 4 layers15 × 11 mmVIB STSPIN240, the printed circuit board in 3D

    VIB STSPIN240

    Aightech/CleverHand-hardware

    40 parts17GPL-3.0
  • 4 layers65 × 56 mmPi transceiver hat, the printed circuit board in 3D

    Pi transceiver hat

    M0LTE/pi-transceiver

    An attempt to build a complete ham radio transceiver around a Raspberry Pi

    40 parts15
  • 4 layers95.9 × 90.2 mmBatteryboard, the printed circuit board in 3D

    Batteryboard

    stanford-ssi/samwise-avionics

    Avionics for 2U Rev of Sputnik Satellite

    40 parts13

Questions

How big is the ArrythmiX PCB?

It measures 39.5 × 28.5 mm and has 4 copper layers, 1.6 mm thick.

What parts does the ArrythmiX use?

40 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ArrythmiX KiCad files?

From the TTF-fog/ArrythmiX repository on GitHub, at the commit this page was made from: the board is Hardware/PCB/PCB.kicad_pcb and its schematic Hardware/PCB/PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ArrythmiX design in my own project?

Its repository states no licence, so its author keeps all rights: ask TTF-fog before reusing the design.