2 layers100 × 80 mm
2 layers100 × 80 mm
Satnogs controller
tt-laboratories/satnogs-rotator-controllerRepository includes all source files of PCB's for the SatNOGS rotator controller assembly.
- Size
- 100 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 107
- Nets
- 76
- Pads
- 315
- Tracks, vias
- 568, 26
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 Nov 2018
- Updated
- 11 Jan 2019
Overview
Satnogs controller is an open-source printed circuit board by tt-laboratories, from the tt-laboratories/satnogs-rotator-controller repository on GitHub. It is a 2-layer board of 100 × 80 mm with 107 parts on 76 nets, routed with 568 tracks and 26 vias.
It is built around the PCA9540BD and TPS54360DDA. Its parts include 19 resistors, 15 capacitors, 8 ICs, 8 connectors and 4 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
PCA9540BD
SO-8-40℃~+85℃ 100uA 2.3V~5.5V 300nA I2C Power-up/reset configuration SO-8 Analog Switches - Special Purpose ROHSNXP SemiconductorsInterface - Specialized
TPS54360DDA
SOIC-8-EP-40℃~+150℃@(TJ) 1 146uA 2.5MHz 3.5A 4.5V~60V 800mV~58.8V Adjustable Buck Buck Built-in No SOIC-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
README
README.mdSatNOGS Rotator Controller
Electronics designs for SatNOGS Rotator.
Repository includes all source files of PCB's for the SatNOGS rotator controller assembly.
Firmware can be found on satnogs-rotator-firmware.
Documentation
More information can be found in our wiki.
Repository policy
SatNOGS hardware repositories only track source design files. All needed derivative files (e.g. stl, grb etc) for production are created per release, packaged in an archive and uploaded linked to a release.
Master branch is most times under active development, so expect things to break. For production ready and previous releases source files check tags.
Contribute
The main repository lives on Gitlab and all Merge Request should happen there.
License
© 2014-2017 Libre Space Foundation.
Licensed under the CERN OHLv1.2.
Parts
107| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | Jumper_NO_Small | Resistors_SMD:R_0805_HandSoldering | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 |
| 6 | 0.1u | Capacitors_SMD:C_0805_HandSoldering | C1, C10, C11, C12, C13, C14 |
| 6 | 4.7k | Resistors_SMD:R_0805_HandSoldering | R2, R3, R5, R6, R16, R17 |
| 3 | 100u | Capacitors_SMD:c_elec_6.3x5.3 | C3, C4, C5 |
| 2 | 10 | Resistors_SMD:R_0805_HandSoldering | R8, R9 |
| 2 | 100k | Resistors_SMD:R_0805_HandSoldering | R4, R7 |
| 2 | 10k | Resistors_SMD:R_0805_HandSoldering | R18, R19 |
| 2 | 200 | Resistors_SMD:R_0805_HandSoldering | R14, R15 |
| 2 | D_Schottky | satnogs:DO-214AB_Handsoldering | D1, D2 |
| 2 | Motor | satnogs:MKDS_1.5-4 | P7, P8 |
| 2 | Pololu_A4988 | satnogs:Pololu_A4988 | U3, U4 |
| 1 | 10.5k | Resistors_SMD:R_0805_HandSoldering | R13 |
| 1 | 100n | Capacitors_SMD:C_0805_HandSoldering | C6 |
| 1 | 100u | satnogs:CP_Radial_D10.0mm_P5.00mm | C15 |
| 1 | 10p | Capacitors_SMD:C_0805_HandSoldering | C8 |
| 1 | 120 | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 147k | Resistors_SMD:R_0805_HandSoldering | R12 |
| 1 | 2.2u | Capacitors_SMD:C_1210_HandSoldering | C2 |
| 1 | 221k | Resistors_SMD:R_0805_HandSoldering | R10 |
| 1 | 26.7k | Resistors_SMD:R_0805_HandSoldering | R11 |
| 1 | 27u | satnogs:Inductor_Bourns-SRR1210_HandSoldering | L1 |
| 1 | 47u | Capacitors_SMD:C_1210_HandSoldering | C9 |
| 1 | 7.5n | Capacitors_SMD:C_0805_HandSoldering | C7 |
| 1 | Arduino_Pro_Mini | satnogs:Arduino_Pro_Mini | U1 |
| 1 | DEV-PINS | Pin_Headers:Pin_Header_Straight_2x04 | P1 |
| 1 | D_TVS | satnogs:DO-214AB_Handsoldering | D4 |
| 1 | D_TVS_x2_AAC | TO_SOT_Packages_SMD:SOT-23_Handsoldering | D3 |
| 1 | End-Stops | Pin_Headers:Pin_Header_Straight_2x03 | P2 |
| 1 | EuroBoard_halb_Type-I_100mmX80mm_holes | EuroBoard_Outline:EuroBoard_halb_Type-I_100mmX80mm_holes | © Libre Space Foundation |
| 1 | FILTER | Resistors_SMD:R_0805_HandSoldering | FB2 |
| 1 | FILTER - POWER | Resistors_SMD:R_0805_HandSoldering | FB1 |
| 1 | FUSE | Fuse_Holders_and_Fuses:Fuse_SMD1206_HandSoldering | F1 |
| 1 | GND-PAD | Mounting_Holes:MountingHole_2.2mm_M2_DIN965_Pad | P5 |
| 1 | I2C | Pin_Headers:Pin_Header_Straight_2x04 | P4 |
| 1 | INPUT | Pin_Headers:Pin_Header_Straight_2x05_Pitch2.54mm | P3 |
| 1 | ISP | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | P6 |
| 1 | LOGO | satnogs:satnogs_logo | G*** |
| 1 | PCA9540B | satnogs:TSSOP-8_3x3mm_Pitch0.65mm_HandSoldering | U7 |
| 1 | Pololu_Dual_MC33926 | satnogs:Pololu_Dual_MC33926 | U6 |
| 1 | SN65HVD485EDR | satnogs:SOIC-8_3.9x4.9mm_Pitch1.27mm_HandSoldering | U2 |
| 1 | TC74 | satnogs:SOT-23-5_HandSoldering | U8 |
| 1 | TPS54360DDA | satnogs:HSOP-8 | U5 |
The 68 most common of 107 parts.
Similar boards
- 2 layers200 × 50 mm
Temperature with holes
Onduleur-Photovoltaique-Caudos/temperature
Schematics and PCB of temperature measurement
65 parts - 2 layers58 × 45 mm
- 4 layers108 × 74 mm
STM32 Drone
bassammorsy/stm32-flight-controller
Custom 4-layer STM32F405RGTx quadcopter flight controller PCB designed in KiCad. Betaflight compatible, 4S–6S LiPo input, SMT assembled by JLCPCB.
104 parts3MIT - 4 layers100 × 100 mm
Pcb AMY
Rivercraft911/R-01_Raster_Laser_Projector
Red, blue and green lasers combine through two dichroc mirrors and bounce off a spinning polygon mirror, which each mirror facet makes one scanline.
159 parts1 - 2 layers119.5 × 60 mm
Futuresight
birbh/FutureSight_CAR
ii. For macos/Linux users: Linux and Mac usually recognize the RNDIS interface automatically, but you need to check if the network interface is active. - Open Terminal: Run ip a (Linux) or ifconfig (Mac).
40 parts - 4 layers230 × 135 mm
Vancontroller
Camperlux/vancontroller
VanController: ESP32-S3 12 V campervan controller board (6 fused relays, 6 PWM dimmers, CAN, RS485, GPS) - KiCad 10 design, manufacturing files and enclosure. Free for non-commercial use.
259 parts - 2 layers128.6 × 91 mm
Questions
How big is the Satnogs controller PCB?
It measures 100 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Satnogs controller use?
107 parts, built around the PCA9540BD and TPS54360DDA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Satnogs controller KiCad files?
From the tt-laboratories/satnogs-rotator-controller repository on GitHub, at the commit this page was made from: the board is satnogs_controller/satnogs_controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Satnogs controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask tt-laboratories before reusing the design.