Skip to the content
2 layers20 × 46 mmTs13 dev kit, the printed circuit board in 3D

Repository collects hw resources for development boards which are available for the TROPIC01 chip

Size
20 × 46 mm
Copper layers
2
Thickness
0.89 mm
Parts
70
Nets
67
Pads
211
Tracks, vias
426, 62
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
15 Jan 2026
Updated
26 Feb 2026

Overview

Ts13 dev kit is an open-source printed circuit board by tropicsquare, from the tropicsquare/devboards repository on GitHub. It is a 2-layer board of 20 × 46 mm with 70 parts on 67 nets, routed with 426 tracks and 62 vias.

It is built around the TPS22917DBV, TPS7A0533PDBZR-HXY and PRTR5V0U2X. Its parts include 14 capacitors, 14 resistors, 4 ICs, 3 diodes and 1 connector. It belongs with the microcontroller boards boards and the STM32 boards of this library.

Main components

3

README

TROPIC01_Arduino_Shield/TS1401/README.md

About

TS14 – TROPIC01 Arduino Shield A KiCad-based hardware project designed to interface the TROPIC01 device with standard Arduino development boards.

This shield allows easy integration of TROPIC01 into Arduino-based environments for development, testing, and prototyping. It is intended for internal use and partner evaluation setups, following the Arduino mechanical and electrical interface.

Project structure

  • *.kicad_pro - KiCad project file
  • *.kicad_sch - Schematic file
  • *.kicad_pcb - PCB layout file
  • ./out/ - Generated Gerber files for PCB manufacturing
  • ./bom/ - Bill of materials, including order codes and interactive BOM
  • ./img/ - Images (e.g. PCB renders)
  • *_schematics.pdf - Exported schematic diagrams (latest version)

Manufacturing instructions:

Assembly

IC1/CON1: Chose one variant, assembly IC1 or CON1 (not both on one board). Chose bom/bom_variant_*.

Because Arduino boards use female sockets, the shield's connectors must be mounted on the top side to allow the pins to extend through to the bottom side for proper connection. \

There are no any special requirements for C and R components. Where not specified the R tolerance is 5% and C 20%.

PCB

  • Number of cu layers: 2
  • Board Thickness: 1.6
  • Core: FR4
  • Size: 58 x 53mm
  • Mask: Blue
  • Silkscreen: Yes (TOP only)

Parts

70
QtyValueFootprintReferences
12TP_mechanical:TestPoint_1.5mm_nothTP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12
81kResistor_SMD:R_0402_1005MetricR2, R3, R4, R5, R6, R7, R13, R14
8hole_mechanical:Hole_1.5mmH1, H2, H3, H4, H5, H6, H7, H8
7TP_mechanical:pad_1mmPAD1, PAD2, PAD3, PAD4, PAD5, PAD6, PAD7
4100nCapacitor_SMD:C_0402_1005MetricC5, C6, C9, C13
3100n/603Capacitor_SMD:C_0603_1608MetricC1, C2, C3
34u7/16VCapacitor_SMD:C_0805_2012MetricC4, C7, C14
210RResistor_SMD:R_0402_1005MetricR9, R10
210nCapacitor_SMD:C_0402_1005MetricC8, C10
210pCapacitor_SMD:C_0402_1005MetricC11, C12
11k5Resistor_SMD:R_0402_1005MetricR11
1220RResistor_SMD:R_0402_1005MetricR12
133kResistor_SMD:R_0402_1005MetricR1
15k1Resistor_SMD:R_0402_1005MetricR8
18MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmX1
1FiducialFiducial:Fiducial_0.5mm_Mask1mmFID1
1Fuse 500mAResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderF1
1LED_GLED_SMD:LED_0805_2012MetricD2
1LED_RLED_SMD:LED_0805_2012MetricD1
1PRTR5V0U2XPackage_TO_SOT_SMD:SOT-143D3
1STM32U535CCTxPackage_QFP:LQFP-48_7x7mm_P0.5mmIC2
1TPS22917DBVPackage_TO_SOT_SMD:SOT-23-6IC4
1TPS7A0533PDBZRPackage_TO_SOT_SMD:SOT-23-3IC3
1TROPIC01_chiptropic01_chip:QFN-32-1EP_4x4mm_P0.4mm_EP2.65x2.65mmIC1
1USB_C_Plug_con_misc:USB_C_plug_UP20CFGFL-P12J1
1hole 2.2mm_mechanical:Hole_2.2mmH9
1logots_logo:tropicsquare_palm_10G1
1logots_logo:tropicsquare_logo_7G2
1tact switch_mechanical:button_PTS636_M25SMTRSW1

More from tropicsquare/devboards

3
  • 2 layers20 × 60 mmTs13 dev kit, the printed circuit board in 3D

    Ts13 dev kit

    tropicsquare/devboards

    Repository collects hw resources for development boards which are available for the TROPIC01 chip

    72 parts4
  • 2 layers58 × 53 mmTs14-arduino shield, the printed circuit board in 3D

    Ts14-arduino shield

    tropicsquare/devboards

    Repository collects hw resources for development boards which are available for the TROPIC01 chip

    17 parts4
  • 2 layers56 × 65 mmTs15-rpi shield, the printed circuit board in 3D

    Ts15-rpi shield

    tropicsquare/devboards

    Repository collects hw resources for development boards which are available for the TROPIC01 chip

    14 parts4

Similar boards

  • 2 layers20 × 46 mmTs13 dev kit, the printed circuit board in 3D

    Ts13 dev kit

    tropicsquare/tropic01-stm32u5-usb-devkit-hw

    Contains design files for TROPIC01 usb devkit based on STM32U5

    68 parts5BSD-3-Clause-Clear
  • 2 layers72 × 67 mmEV Design Challenge, the printed circuit board in 3D

    EV Design Challenge

    land-barrett/EV_Design_Challenge

    KiCAD files of 2026 TAMU SAE Formula EV electrical design challenge

    78 parts
  • 2 layers70.9 × 44.9 mmLightning detector, the printed circuit board in 3D

    Lightning detector

    pypilot/pypilot_mfd

    lcd display for various types of marine data including nmea0183, signalk and pypilot

    30 parts4
  • 4 layers69 × 31 mmSilver, the printed circuit board in 3D

    Silver

    Foalyy/silver-kicad

    Kicad project for the Silver open-source, long-range camera remote control

    96 parts18GPL-3.0
  • 6 layers133 × 92 mmMotherboard, the printed circuit board in 3D

    Motherboard

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    264 parts4.3kMIT
  • 4 layers95 × 55.5 mmEinkPDA keyboard, the printed circuit board in 3D

    EinkPDA keyboard

    TalismanDesign/PocketMage_PDA

    An E-Ink PDA device using the ESP32 S3.

    137 parts2kApache-2.0
  • 4 layers66.9 × 87 mmMeshtasticNode BQ25185, the printed circuit board in 3D

    MeshtasticNode BQ25185

    h0lad/SolarMeshtasticNode

    This is a Meshtastic Solar Node PCB based on the Heltec HT-CT62 and the linear solar charge controller TI BQ25185.

    49 parts40CERN-OHL-S-2.0
  • 2 layers75 × 60 mmDUTler V2, the printed circuit board in 3D

    DUTler V2

    TheYoctoJester/dutler

    A bench butler for your Device Under Test: turns a Raspberry Pi Pico into a USB-serial console bridge with power-relay and MOSFET strap/reset control for embedded-Linux bring-up and hardware-in-the-loop.

    54 parts23Apache-2.0

Questions

How big is the Ts13 dev kit PCB?

It measures 20 × 46 mm and has 2 copper layers, 0.89 mm thick.

What parts does the Ts13 dev kit use?

70 parts, built around the TPS22917DBV, TPS7A0533PDBZR-HXY and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ts13 dev kit KiCad files?

From the tropicsquare/devboards repository on GitHub, at the commit this page was made from: the board is TROPIC01_USB_Devkit/PCB/TS1303/ts13_dev_kit.kicad_pcb and its schematic TROPIC01_Arduino_Shield/TS1401/ts14-arduino-shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ts13 dev kit design in my own project?

Its repository states no licence, so its author keeps all rights: ask tropicsquare before reusing the design.