4 layers66.4 × 66.4 mm
Rera
fdiwth/tvc-drone
This repository contains the documentation, hardware designs, and source code for a Thrust Vector Control (TVC) drone.
140 parts34GPL-3.0
2 layers72 × 67 mm
EV Design Challenge
land-barrett/EV_Design_ChallengeKiCAD files of 2026 TAMU SAE Formula EV electrical design challenge
- Size
- 72 × 67 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 75
- Pads
- 295
- Tracks, vias
- 353, 181
- Pours
- 17
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 Mar 2026
- Updated
- 22 Mar 2026
Overview
EV Design Challenge is an open-source printed circuit board by land-barrett, from the land-barrett/EV_Design_Challenge repository on GitHub. It is a 2-layer board of 72 × 67 mm with 78 parts on 75 nets, routed with 353 tracks and 181 vias.
It is built around the MP2393GTL-Z, NE555DR and TPS7A0533PDBZR-HXY, with the 1N4148WS, BLM18AG601SN1D and STP110N10F7 among its other parts. Its parts include 28 capacitors, 19 resistors, 8 diodes, 5 ICs and 5 connectors. It belongs with the STM32 boards of this library.
Main components
11
MP2393GTL-Z
SOT-583-40℃~+125℃@(TJ) 1 200uA 3A 4.2V~24V 650kHz 800mV~13V Adjustable Buck Buck Built-in Yes SOT-583 DC-DC Converters ROHSMonolithic Power SystemsDC-DC Converters
NE555DR
SOP-80℃~+70℃ 100kHz 4.5V~16V SOP-8 555 Timers / Counters ROHSUMWTimers / Counters
TPS7A0533PDBZR-HXY
SOT-23-3L-40℃~+85℃ 1uA 300mA Fixed Over Current Protection、Short Circuit Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHXY MOSFETVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching Diodes
BLM18AG601SN1D
0603-55℃~+125℃ 1 380mΩ 500mA 600Ω@100MHz ±25% 0603 Ferrite Beads ROHSMurataFerrite Beads
STP110N10F7
TO-220-55℃~+175℃ 1 N-channel 100V 110A 150W 2.5V 39pF 5.117nF 5.1mΩ@10V 72nC@50V TO-220 MOSFETs ROHSSTMicroelectronicsMOSFETsABS07-120-32.768KHZ-T
SMD3215-2P-40℃~+85℃ 32.768kHz 55kΩ 6pF ±20ppm SMD3215-2P Crystals ROHSAbraconCrystals
AON6284A
PDFN-8L(5x6)-55℃~+150℃ 1 N-channel 100V 2.86nF 38pF 3V 40nC@10V 410pF 57W 6.5mΩ@10V 60A PDFN-8L(5x6) MOSFETs ROHSTECH PUBLICMOSFETs
LBZT52C12T1G
SOD-123-55℃~+150℃ 1 Independent 100nA 11.4V~12.9V 12V 150Ω 25Ω 500mW SOD-123 Zener Diodes ROHSLeshan Radio (LRC)Zener Diodes
MBRS1100T3G-FS
SMB(DO-214AA)-55℃~+175℃ 100V 1A 500uA@20V 50A 750mV@2A Independent SMB(DO-214AA) Schottky Diodes ROHSFUXINSEMISchottky Diodes
X322524MSB4SI
SMD3225-4P-40℃~+85℃ 20pF 24MHz 50Ω Crystal Oscillator ±10ppm ±20ppm SMD3225-4P Crystals ROHSYXCCrystals
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | C_100nF_0402 | Capacitor_SMD:C_0402_1005Metric | C2, C6, C7, C8, C9, C11, C14, C20 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | C_1nF_0402 | Capacitor_SMD:C_0402_1005Metric | C3, C12, C23 |
| 3 | C_1uF_0603 | Capacitor_SMD:C_0603_1608Metric | C24, C26, C27 |
| 3 | C_22uF_0805 | Capacitor_SMD:C_0805_2012Metric | C19, C21, C22 |
| 3 | WAGO-2604-1102 | BarrettsFootprints:CONN2_2604-1102_WAG | J1, J2, J5 |
| 2 | 1N4148WS | Diode_SMD:D_SOD-323 | D1, D2 |
| 2 | BLM18AG601SN1D | Resistor_SMD:R_0603_1608Metric | FB1, FB2 |
| 2 | C_5.1pF_0402 | Capacitor_SMD:C_0402_1005Metric | C15, C16 |
| 2 | C_6.8pF_0402 | Capacitor_SMD:C_0402_1005Metric | C17, C18 |
| 2 | LED_RED_0603 | LED_SMD:LED_0603_1608Metric | D5, D7 |
| 2 | LED_YELLOW/GREEN_0603 | LED_SMD:LED_0603_1608Metric | D6, D8 |
| 2 | R_1.1K_0603_1% | Resistor_SMD:R_0603_1608Metric | R4, R10 |
| 2 | R_10K_0402 | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | R_10K_0603_1% | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | R_16K_0603_1% | Resistor_SMD:R_0603_1608Metric | R7, R9 |
| 2 | R_1K_0402 | Resistor_SMD:R_0402_1005Metric | R18, R19 |
| 2 | R_5.1K_0402 | Resistor_SMD:R_0402_1005Metric | R16, R17 |
| 2 | STP110N10F7 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2 |
| 1 | 01x02_2.54mm_Header_Pins | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | 01x05_2.54mm_Header_Pins | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | ABS07-120-32.768KHZ-T | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y4 |
| 1 | AON6284A | Package_DFN_QFN:AO_DFN-8-1EP_5.55x5.2mm_P1.27mm_EP4.12x4.6mm | Q3 |
| 1 | C_10nF_0402 | Capacitor_SMD:C_0402_1005Metric | C13 |
| 1 | C_10pF_0402 | Capacitor_SMD:C_0402_1005Metric | C28 |
| 1 | C_10uF_0603 | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | C_4.7uF_0402 | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | C_47nF_0603 | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | C_47uF_50V_Electrolytic | Capacitor_SMD:CP_Elec_6.3x5.4 | C1 |
| 1 | C_6.8nF_0402 | Capacitor_SMD:C_0402_1005Metric | C21 |
| 1 | LBZT52C12T1G | Diode_SMD:D_SMC | D4 |
| 1 | L_4.9uH_6.5A_14.5mR_7x6.9 | Barrett's Personal Library:7x6.9_Wurth_Inductor | L1 |
| 1 | MBRS1100T3G-FS | Diode_SMD:D_SMC | D3 |
| 1 | MCP2562-E-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | MP2393GTL-Z | Package_TO_SOT_SMD:SOT-583-8 | U2 |
| 1 | NE555DR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | R_1.5K_0603_1% | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | R_15K_0603_1% | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | R_20R_0402 | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | R_40.2K_0603_1% | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | R_604K_0603_1% | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | R_7.68K_0603_1% | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | R_Shunt_10mR_0805_0.5W | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | SMT_Debug_Push_Button | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | STM32G473CEUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | TPS7A0533PDBZR | Package_TO_SOT_SMD:SOT-23 | U5 |
| 1 | X322524MSB4SI | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y3 |
Similar boards
- 2 layers25.9 × 51.3 mm
- 4 layers100 × 70 mm
Data port x4
kartben/hw-testing-rack
3D-printed, tilted test shelf for 16 dev boards: sliding drawers, per-bay ESP32-S3 running Zephyr (USB/IP, power switching, metering), KiCad PCBs, OpenSCAD parts, BOM and an interactive 3D viewer
290 parts - 2 layers100 × 41 mm
- 2 layers20 × 46 mm
Ts13 dev kit
tropicsquare/tropic01-stm32u5-usb-devkit-hw
Contains design files for TROPIC01 usb devkit based on STM32U5
68 parts5BSD-3-Clause-Clear - 2 layers70.9 × 44.9 mm
Lightning detector
pypilot/pypilot_mfd
lcd display for various types of marine data including nmea0183, signalk and pypilot
30 parts4 - 2 layers20 × 46 mm
Ts13 dev kit
tropicsquare/devboards
Repository collects hw resources for development boards which are available for the TROPIC01 chip
70 parts4 - 4 layers132.5 × 82 mm
Wandfernsprecher
hanebefl/wandfernsprecher-hw
GSM conversion for a old German Wandfernsprecher telephone
93 parts6
Questions
How big is the EV Design Challenge PCB?
It measures 72 × 67 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EV Design Challenge use?
78 parts, built around the MP2393GTL-Z, NE555DR, TPS7A0533PDBZR-HXY and 1N4148WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EV Design Challenge KiCad files?
From the land-barrett/EV_Design_Challenge repository on GitHub, at the commit this page was made from: the board is EV_Design_Challenge.kicad_pcb and its schematic EV_Design_Challenge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EV Design Challenge design in my own project?
Its repository states no licence, so its author keeps all rights: ask land-barrett before reusing the design.