ZegesMenden/stm32-devboard1Stm32-devboard is an open-source printed circuit board by ZegesMenden, from the ZegesMenden/stm32-devboard repository on GitHub. It is a 2-layer board of 25.9 × 51.3 mm with 23 parts on 47 nets, routed with 313 tracks and 27 vias.
It is built around the X161032768KJD2SI and X322524MSB4SI. Its parts include 13 capacitors, 3 connectors, 2 resistors, 2 ICs and 2 crystals. It belongs with the microcontroller boards boards and the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5 |
| 2 | 30p | Capacitor_SMD:C_0402_1005Metric | C6, C7 |
| 2 | 4p | Capacitor_SMD:C_0402_1005Metric | C9, C10 |
| 2 | Conn_01x20_Pin | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J2, J3 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10u | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C13 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C11 |
| 1 | AZ1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | STM32G473CCUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | X161032768KJD2SI | Crystal:Crystal_SMD_MicroCrystal_CM9V-T1A-2Pin_1.6x1.0mm | Y2 |
| 1 | X322524MSB4SI | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
kartben/hw-testing-rack
3D-printed, tilted test shelf for 16 dev boards: sliding drawers, per-bay ESP32-S3 running Zephyr (USB/IP, power switching, metering), KiCad PCBs, OpenSCAD parts, BOM and an interactive 3D viewer
land-barrett/EV_Design_Challenge
KiCAD files of 2026 TAMU SAE Formula EV electrical design challenge
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
It measures 25.9 × 51.3 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the X161032768KJD2SI and X322524MSB4SI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ZegesMenden/stm32-devboard repository on GitHub, at the commit this page was made from: the board is stm32-devboard.kicad_pcb and its schematic stm32-devboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ZegesMenden before reusing the design.
