2 layers20 × 46 mm
Ts13 dev kit
tropicsquare/devboards
Repository collects hw resources for development boards which are available for the TROPIC01 chip
70 parts4
2 layers20 × 60 mm
Ts13 dev kit
tropicsquare/devboards4Repository collects hw resources for development boards which are available for the TROPIC01 chip
- Size
- 20 × 60 mm
- Copper layers
- 2
- Thickness
- 0.89 mm
- Parts
- 72
- Nets
- 77
- Pads
- 228
- Tracks, vias
- 381, 67
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 15 Jan 2026
- Updated
- 26 Feb 2026
Overview
Ts13 dev kit is an open-source printed circuit board by tropicsquare, from the tropicsquare/devboards repository on GitHub. It is a 2-layer board of 20 × 60 mm with 72 parts on 77 nets, routed with 381 tracks and 67 vias.
It is built around the TPS22917DBV and PRTR5V0U2X. Its parts include 14 capacitors, 13 resistors, 4 ICs, 2 diodes and 1 connector. It belongs with the microcontroller boards boards and the STM32 boards of this library.
Main components
2
TPS22917DBV
SOT-23-6-40℃~+125℃ 0V~5.5V 1 2A 80mΩ Active High Load Switch Output discharge function、Soft-start、Reverse current blocking SOT-23-6 Power Distribution Switches ROHSTexas InstrumentsPower Distribution Switches
PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
TROPIC01_Arduino_Shield/TS1401/README.mdAbout
TS14 – TROPIC01 Arduino Shield A KiCad-based hardware project designed to interface the TROPIC01 device with standard Arduino development boards.
This shield allows easy integration of TROPIC01 into Arduino-based environments for development, testing, and prototyping. It is intended for internal use and partner evaluation setups, following the Arduino mechanical and electrical interface.
Project structure
*.kicad_pro- KiCad project file*.kicad_sch- Schematic file*.kicad_pcb- PCB layout file./out/- Generated Gerber files for PCB manufacturing./bom/- Bill of materials, including order codes and interactive BOM./img/- Images (e.g. PCB renders)*_schematics.pdf- Exported schematic diagrams (latest version)
Manufacturing instructions:
Assembly
IC1/CON1: Chose one variant, assembly IC1 or CON1 (not both on one board).
Chose bom/bom_variant_*.
Because Arduino boards use female sockets, the shield's connectors must be mounted on the top side to allow the pins to extend through to the bottom side for proper connection. \
There are no any special requirements for C and R components. Where not specified the R tolerance is 5% and C 20%.
PCB
- Number of cu layers: 2
- Board Thickness: 1.6
- Core: FR4
- Size: 58 x 53mm
- Mask: Blue
- Silkscreen: Yes (TOP only)
Parts
72| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | TP | _mechanical:TestPoint_1.5mm_noth | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 8 | hole | _mechanical:Hole_1.45mm | H1, H2, H3, H4, H5, H6, H7, H8 |
| 7 | SolderJumper_2_Bridged | _mechanical:SolderJumper-2_P1.3mm_Bridged | JP1, JP2, JP3, JP4, JP5, JP6, JP7 |
| 7 | TP | _mechanical:pad_1mm | PAD1, PAD2, PAD3, PAD4, PAD5, PAD6, PAD7 |
| 6 | 1k | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R5, R6, R11 |
| 5 | 100n | Capacitor_SMD:C_0805_2012Metric | C5, C6, C9, C13, C14 |
| 3 | 100n/603 | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3 |
| 3 | hole 2.2mm | _mechanical:Hole_2.2mm | H9, H10, H11 |
| 2 | 10R | Resistor_SMD:R_0805_2012Metric | R8, R9 |
| 2 | 10n | Capacitor_SMD:C_0805_2012Metric | C8, C10 |
| 2 | 10p | Capacitor_SMD:C_0805_2012Metric | C11, C12 |
| 2 | 4u7/16V | Capacitor_SMD:C_0805_2012Metric | C4, C7 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric | R12, R13 |
| 1 | 1k5 | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 220R | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 33k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 8MHz | Crystal:Crystal_SMD_0603-4Pin_6.0x3.5mm | X1 |
| 1 | AZ1117C-33 | Package_TO_SOT_SMD:SOT-223 | IC2 |
| 1 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1mm | FID1 |
| 1 | Fuse 500mA | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | F1 |
| 1 | LED_R | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D2 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | IC3 |
| 1 | TPS22917DBV | Package_TO_SOT_SMD:SOT-23-6 | IC4 |
| 1 | TROPIC01_chip | tropic01_chip:QFN-32-1EP_4x4mm_P0.4mm_EP2.65x2.65mm | IC1 |
| 1 | USB_C_Plug | _con_misc:USB_C_plug_USB4155_03_C | J1 |
| 1 | logo | ts_logo:tropicsquare_palm_10 | G1 |
| 1 | logo | ts_logo:tropicsquare_logo_7 | G2 |
More from tropicsquare/devboards
3- 2 layers58 × 53 mm
Ts14-arduino shield
tropicsquare/devboards
Repository collects hw resources for development boards which are available for the TROPIC01 chip
17 parts4 - 2 layers56 × 65 mm
Ts15-rpi shield
tropicsquare/devboards
Repository collects hw resources for development boards which are available for the TROPIC01 chip
14 parts4
Similar boards
- 4 layers69 × 31 mm
Silver
Foalyy/silver-kicad
Kicad project for the Silver open-source, long-range camera remote control
96 parts18GPL-3.0 - 2 layers20 × 46 mm
Ts13 dev kit
tropicsquare/tropic01-stm32u5-usb-devkit-hw
Contains design files for TROPIC01 usb devkit based on STM32U5
68 parts5BSD-3-Clause-Clear - 6 layers133 × 92 mm
Motherboard
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
264 parts4.3kMIT - 4 layers95 × 55.5 mm
EinkPDA keyboard
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
137 parts2kApache-2.0 - 4 layers66.9 × 87 mm
MeshtasticNode BQ25185
h0lad/SolarMeshtasticNode
This is a Meshtastic Solar Node PCB based on the Heltec HT-CT62 and the linear solar charge controller TI BQ25185.
49 parts40CERN-OHL-S-2.0 - 2 layers75 × 60 mm
DUTler V2
TheYoctoJester/dutler
A bench butler for your Device Under Test: turns a Raspberry Pi Pico into a USB-serial console bridge with power-relay and MOSFET strap/reset control for embedded-Linux bring-up and hardware-in-the-loop.
54 parts23Apache-2.0 - 2 layers
Suntastic
snorkman88/suntastic
An ultra low-power management board for IoT devices
120 parts13Apache-2.0 - 4 layers48 × 45.5 mm
LoRaHarvesterBox
h0lad/LoRaHarvesterBox
PCB integrating a ST STM32WLE5CC and TI BQ25570 energy harvester. Ideal platform for ultra-low-power LoRa(WAN) nodes projects.
46 parts11CERN-OHL-S-2.0
Questions
How big is the Ts13 dev kit PCB?
It measures 20 × 60 mm and has 2 copper layers, 0.89 mm thick.
What parts does the Ts13 dev kit use?
72 parts, built around the TPS22917DBV and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ts13 dev kit KiCad files?
From the tropicsquare/devboards repository on GitHub, at the commit this page was made from: the board is TROPIC01_USB_Devkit/PCB/TS1301/ts13_dev_kit.kicad_pcb and its schematic TROPIC01_Arduino_Shield/TS1401/ts14-arduino-shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ts13 dev kit design in my own project?
Its repository states no licence, so its author keeps all rights: ask tropicsquare before reusing the design.