H bridge

11 boards

KiCad boards from 10 GitHub repositories tagged “h-bridge”, the most starred first; open any of them in PCBKit.

2 layers99.7 × 99.1 mm
DrivewayGateControl
motivemachine/dual_swing_gate_controller
A relay-driven dual DC motor controller for a double-swing gate opener. Uses Arduino and LoRa. This repo is a mirror for:
56 parts7MIT
2 layers98.8 × 55.1 mm
H bridge controller
jayanta525/dual-h-bridge
Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller
104 parts5MIT
2 layers40 × 20 mm
B L9110S Brk R1.0
Boardoza/Boardoza_L9110S_Dual_DC_Motor_Driver_Breakout_Board
Dual-channel L9110S DC motor driver breakout board for bidirectional motor control.
22 parts1CC-BY-SA-4.0
2 layers40 × 40 mm
B TPA3111-BRK R1.0
Boardoza/Boardoza_TPA3111_Mono_Audio_Amplifier_Breakout_Board
Compact Class-D mono audio amplifier breakout board based on the TPA3111D1, delivering up to 10W output.
32 partsCC-BY-SA-4.0
4 layers80 × 40 mm
B VNH5019-BRK R1.0
Boardoza/Boardoza_VNH5019_H_Bridge_Motor_Driver_Module
B-VNH5019-BRK is a high-current full H-bridge motor driver module based on the VNH5019A-E for 5.5V–24V DC motor control.
22 partsCC-BY-SA-4.0
2 layers60 × 40 mm
B VNH7070AS BRK R1.0
Boardoza/Boardoza_VNH7070AS_Bidirectional_DC_Motor_Driver_Breakout_Board
Compact VNH7070AS-based full-bridge motor driver breakout board for bidirectional DC motor control with PWM and current sensing.
20 partsCC-BY-SA-4.0
2 layers30 × 40.1 mm
DRV8835HB01B
mlab-modules/DRV8835HB01
Control two DC motors with DRV8835HB H-bridge ICs up to 2x1.5A @ 11 V
25 parts
2 layers97 × 50 mm
H bridge
Mohamed-U3/H-bridge-PCB
H-bridge with MOSFETs and IR2110 designed with KiCAD
52 partsMIT
2 layers74 × 55.8 mm
HBridge
serpentsniper/hbridge-motor-driver
Two-channel brushed DC motor driver in KiCad. Discrete IRLZ44N H-bridges, IR2104 gate drivers, per-channel current sense and quadrature encoder inputs, on a 74 x 56 mm board with a Raspberry Pi Pico.
63 partsMIT
4 layers96.4 × 80.6 mm
Pcb mini racecar
umut181/pcb-mini-racecar
A custom PCB design for a 2WD, IR-controlled differential-drive robot vehicle. Built to run on 2S–6S LiPo battery input, drive 5 V-based microcontrollers, and power low-reduction TT motors: all on a single compact board.
58 parts
2 layers75 × 60.3 mm
HBridge
serpentsniper/hbridge-motor-driver
Two-channel brushed DC motor driver in KiCad. Discrete IRLZ44N H-bridges, IR2104 gate drivers, per-channel current sense and quadrature encoder inputs, on a 74 x 56 mm board with a Raspberry Pi Pico.
47 partsMIT