2 layers50 × 50 mm
2 layers50 × 50 mm
M5 USB Host v01
tomorrow56/M5Stack_USB_Host14- Size
- 50 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 33
- Pads
- 196
- Tracks, vias
- 166, 20
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 13 Jul 2018
- Updated
- 18 Nov 2018
Overview
M5 USB Host v01 is an open-source printed circuit board by tomorrow56, from the tomorrow56/M5Stack_USB_Host repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 50 × 50 mm with 26 parts on 33 nets, routed with 166 tracks and 20 vias.
It is built around the AMS1117-3.3V, MAX3421EEHJ+ and 1N4148WS. Its parts include 7 capacitors, 3 resistors, 3 connectors, 2 ICs and 1 diode.
Main components
3
AMS1117-3.3V
SOT-223-20℃~+85℃ 1 1.2A 1.5V@(800mA) 15V 3.3V 5mA Fixed Positive Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJSMSEMIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MAX3421EEHJ+
UncategorisedMaxim Integrated Products
1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching Diodes
README
README.mdParts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10uF | Capacitors_SMD:C_0603 | C1, C2, C3, C5 |
| 4 | Mounting_Hole | Mounting_Holes:MountingHole_2.2mm_M2 | MK5, MK6, MK7, MK8 |
| 4 | Mounting_Hole | Mounting_Holes:MountingHole_3.2mm_M3 | MK1, MK2, MK3, MK4 |
| 2 | 18pF | Capacitors_SMD:C_0603 | C6, C7 |
| 2 | 33 | Resistors_SMD:R_0603 | R1, R2 |
| 1 | 100uF | Capacitors_SMD:C_1206 | C4 |
| 1 | 12MHz | Crystals:Crystal_SMD_5032-2pin_5.0x3.2mm | Y1 |
| 1 | 1N4148WS | Diodes_SMD:D_SOD-323 | D1 |
| 1 | 2.2k | Resistors_SMD:R_0603 | R3 |
| 1 | AMS1117-33 | TO_SOT_Packages_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Battery | Pin_Headers:Pin_Header_Angled_1x02_Pitch2.54mm | J3 |
| 1 | M-BUS | footprint:Pin_Header_MBUS_SMD | J1 |
| 1 | MAX3421E | footprint:MAX3421E_TQFP32-5MM | U2 |
| 1 | OPEN_HARDWARE_1 | footprint:OSHW-logo_silkscreen-front_3mm | LOGO1 |
| 1 | USB_A | Connectors:USB_A | J2 |
More from tomorrow56/M5Stack_USB_Host
2- 2 layers50 × 50 mm
Similar boards
- 2 layers100 × 100 mm
- 2 layers22.9 × 36.7 mm
Usb2usb
tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware
26 parts152 - 2 layers30.5 × 63 mm
Adbuino
akuker/adbuino
Arduino-based USB keyboard and Mouse to ADB adapter. Allows USB keyboards and mice to be used with vintage Macintosh computers.
75 parts60 - 2 layers100 × 100 mm
Mist1010
UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure
273 parts43MIT - 4 layers47 × 85.3 mm
- 2 layers190.2 × 100.3 mm
Micropet v3
fachat/cbm_micropet
A small, single-PCB clone of the Commodore PET with all modern parts
183 parts10GPL-3.0 - 4 layers160 × 100.2 mm
Csa ultracpu
fachat/csa_ultracpu
The CPU board for a 17MHz Colour-PET clone with modern interfaces
175 parts9GPL-3.0 - 2 layers41.3 × 48.9 mm
Max3421eboard
mvirkkunen/max3421eboard
Breakout board for MAX3421E SPI USB host/device controller
32 parts1
Questions
How big is the M5 USB Host v01 PCB?
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the M5 USB Host v01 use?
26 parts, built around the AMS1117-3.3V, MAX3421EEHJ+ and 1N4148WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the M5 USB Host v01 KiCad files?
From the tomorrow56/M5Stack_USB_Host repository on GitHub, at the commit this page was made from: the board is v1.0/KiCad/M5_USB_Host_v01.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the M5 USB Host v01 design in my own project?
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).