
Mist1010
UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure

Breakout board for MAX3421E SPI USB host/device controller
Max3421eboard is an open-source printed circuit board by mvirkkunen, from the mvirkkunen/max3421eboard repository on GitHub. It is a 2-layer board of 41.3 × 48.9 mm with 32 parts on 39 nets, routed with 421 tracks and 35 vias.
It is built around the LP2985-33DBV and MAX3421EEHJ+. Its parts include 9 capacitors, 8 resistors, 7 connectors, 3 ICs and 1 inductor.
It's my first PCB. Not verified yet.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistors_SMD:R_0805_HandSoldering | R5, R6, R7, R8 |
| 4 | 1u | Capacitors_SMD:C_0805_HandSoldering | C4, C6, C8, C10 |
| 4 | 33 1% | Resistors_SMD:R_0805_HandSoldering | R1, R2, R3, R4 |
| 2 | 100n | Capacitors_SMD:C_0805_HandSoldering | C7, C9 |
| 2 | 18p | Capacitors_SMD:C_0805_HandSoldering | C1, C2 |
| 2 | 1x8 | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | J4, J5 |
| 1 | 10n | Capacitors_SMD:C_0805_HandSoldering | C3 |
| 1 | 120 @ 100MHz | Inductors_SMD:L_0805_HandSoldering | L1 |
| 1 | 12MHz | Crystals:Crystal_SMD_5032-2pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | 1x10 | Pin_Headers:Pin_Header_Straight_1x10_Pitch2.54mm | J3 |
| 1 | 1x3 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J6 |
| 1 | Closed | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | Conn_01x04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J7 |
| 1 | LOGO | matti:syobo_n | G*** |
| 1 | LP2985-3.3 | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U2 |
| 1 | MAX3421E | max3421e:TQFP32-5MM | U1 |
| 1 | STMPS2141STR | TO_SOT_Packages_SMD:SOT-23-5 | U3 |
| 1 | USB A | Connectors:USB_A | J1 |
| 1 | USB MicroB | Connectors:USB_Micro-B_10103594-0001LF | J2 |
The 31 most common of 32 parts.

UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure

tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware

akuker/adbuino
Arduino-based USB keyboard and Mouse to ADB adapter. Allows USB keyboards and mice to be used with vintage Macintosh computers.



fachat/cbm_micropet
A small, single-PCB clone of the Commodore PET with all modern parts

fachat/csa_ultracpu
The CPU board for a 17MHz Colour-PET clone with modern interfaces

It measures 41.3 × 48.9 mm and has 2 copper layers, 1.6 mm thick.
32 parts, built around the LP2985-33DBV and MAX3421EEHJ+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mvirkkunen/max3421eboard repository on GitHub, at the commit this page was made from: the board is max3421eboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mvirkkunen before reusing the design.