
Usb2usb
tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware

Develop hardware usb 2.0 sniffer
Usbsniff v02 is an open-source printed circuit board by Xarlan, from the Xarlan/usbsniff repository on GitHub, published under the MPL-2.0 licence. It is a 2-layer board of 31.5 × 96 mm with 31 parts on 68 nets, routed with 369 tracks and 20 vias.
It is built around the MAX3421EEHJ+ and AMS1117. Its parts include 13 capacitors, 6 resistors, 4 crystals, 3 ICs and 3 connectors.
Develop hardware usb 2.0 sniffer
The main idea - to develop cheap hardware usb sniffer which possible to assemble at home :)
Current version based on MAX3421E
/pcb
This folder contain KiCad project of usb sniffer
Support follow EP:
Thank you for "x8-999-github" for some good advices and idea.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitors_SMD:C_0805 | C6, C7, C8, C13 |
| 4 | 20pF | Capacitors_SMD:C_0805 | C1, C2, C4, C5 |
| 4 | 33 Ohm | Resistors_SMD:R_0805 | R1, R2, R3, R4 |
| 3 | 1uF | Capacitors_SMD:C_0805 | C9, C10, C12 |
| 2 | 10uF | Capacitors_Tantalum_SMD:TantalC_SizeB_EIA-3528_Reflow | C3, C11 |
| 2 | 12MHz | footprints:HC49-SM | Y1, Y2 |
| 2 | 470 Ohm | Resistors_SMD:R_0805 | R5, R6 |
| 2 | CONN_01X08 | Pin_Headers:Pin_Header_Straight_1x08 | P2, P3 |
| 2 | LED | LEDs:LED-3MM | D1, D2 |
| 2 | MAX3421E | footprints:TQFP-32_5x5mm | U2, U3 |
| 1 | AMS1117 | TO_SOT_Packages_SMD:SOT-223 | U1 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P1 |
| 1 | USB_type_A | footprints:USBA_1J_DS_1095_WR | X1 |
| 1 | micro_USB | footprints:micro_USB_KLS1-233-0-0-1-T | X2 |

tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware

akuker/adbuino
Arduino-based USB keyboard and Mouse to ADB adapter. Allows USB keyboards and mice to be used with vintage Macintosh computers.

UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure



fachat/cbm_micropet
A small, single-PCB clone of the Commodore PET with all modern parts

fachat/csa_ultracpu
The CPU board for a 17MHz Colour-PET clone with modern interfaces

mvirkkunen/max3421eboard
Breakout board for MAX3421E SPI USB host/device controller
It measures 31.5 × 96 mm and has 2 copper layers, 1.6 mm thick.
31 parts, built around the MAX3421EEHJ+ and AMS1117. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Xarlan/usbsniff repository on GitHub, at the commit this page was made from: the board is pcb/usbsniff_v02.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).