

WindPCB
- Size
- 62.3 × 52.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 30
- Pads
- 99
- Tracks, vias
- 141, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 17 Jun 2024
- Updated
- 29 Oct 2026
Overview
WindPCB is an open-source printed circuit board by titio72, from the titio72/n2k_wind repository on GitHub. It is a 2-layer board of 62.3 × 52.3 mm with 36 parts on 30 nets, routed with 141 tracks and 0 vias.
It is built around the TSR 1-2433E, 74AHC1G14GV and NUP2105L. Its parts include 8 capacitors, 7 resistors, 6 ICs and 2 diodes. It belongs with the SAM D and SAM boards of this library.
Main components
3TSR 1-2433E
SIP,11.6x7.5mm-40℃~+85℃ 1 1000uF 1A 3.3V 520kHz 6V~36V 80mVp-p 88% Plastic encapsulated type Short Circuit Protection、Over-temperature protection、Over Current Protection、Automatic fault recovery Step-down type ±4% SIP,11.6x7.5mm DC-DC Power Modules ROHSTRACO POWERDC-DC Power Modules74AHC1G14GV
SOT-23-5-40℃~+125℃ 1 1 1.2V~2.2V、1.75V~3.15V、2.15V~3.85V 16.3ns@3.3V,15pF 2V~5.5V 40uA 74AHC 8mA 8mA 900mV~1.9V、1.35V~2.75V、1.65V~3.35V SOT-23-5 Logic Gates ROHSTECH PUBLICLogic GatesNUP2105L
SOT-23-55℃~+150℃ 100nA 2 24V 30pF 32V 350W@8/20us 44V 8A@8/20us Bidirectional IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS SOT-23 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C1, C2, C3, C5 |
| 3 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2, JP4 |
| 2 | 22nF | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C4, C7 |
| 2 | 3K3 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R3 |
| 2 | 4K7 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R5 |
| 2 | 5K | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1, RV2 |
| 2 | Conn_01x04 | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | AUX1, J6 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
| 1 | 120 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R7 |
| 1 | 2K2 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R12 |
| 1 | 330uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C6 |
| 1 | 47nF | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C8 |
| 1 | 74AHC1G14 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U1 |
| 1 | COS | connectors:KEYSTONE_1267 | J_COS1 |
| 1 | GND | connectors:KEYSTONE_1267 | J_GND1 |
| 1 | Jumper_3_Bridged12 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP3 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U7 |
| 1 | LM7808_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | MCP2562-E-P | Package_DIP:DIP-8_W7.62mm | U4 |
| 1 | NUP2105L | Package_TO_SOT_SMD:SOT-23 | D2 |
| 1 | SIN | connectors:KEYSTONE_1267 | J_SIN1 |
| 1 | SPEED | connectors:KEYSTONE_1267 | J_SPEED1 |
| 1 | SeeeduinoXIAO | seeduino:Seeeduino XIAO-MOUDLE14P-2.54-21X17.8MM_1 | U3 |
| 1 | TSR1-2433E | Converter_DCDC:Converter_DCDC_TRACO_TSR-1_THT | U5 |
| 1 | VCC | connectors:KEYSTONE_1267 | J_VCC1 |
More from titio72/n2k_wind
1- 2 layers62.5 × 52 mm

Similar boards
- 2 layers59 × 74.8 mm

N2k meteo gps s3 tht
titio72/n2k_router_arduino
Integrated GPS, meteo, tachometer, and speed sensor for NMEA2000 networks
45 parts1GPL-3.0 - 2 layers160.5 × 146.5 mm

Schemav2
rayanyahiaoui13/24PowerLEDsController
The goal of this system is to provide independent and precise control of a 24-LED matrix composed of high-power LEDs to independently illuminate 24 wells of a Greiner plate containing duckweed.
146 parts1GPL-3.0 - 4 layers72.5 × 39.7 mm

FOC RP2350
totaldesaster/SimpleFOC-Serial-Driver
Advanced dual BLDC driver based on the RP2350 and DRV8323S ICs, designed to be controlled from a trajectory controller over RS-485, RS-422 or TTL UART. Features a compact high power design with two stacked PCBs.
68 parts1GPL-3.0 - 4 layers99 × 146 mm

Carte principale
Unimakers/CDR-2027
Ce repo est un site de documentation réalisé par l'équipe des première et deusième années pré-ingénieur de l'école Unilasalle-Amiens, membre de l'association de robotique Unimaker, dans le cadre de leur participation à…
156 parts1 - 2 layers80.2 × 94.6 mm

MANUEL ARGIBAYMOLINA ELECTRONICS
ManuelArgibay/Industrial-I-O-Controller
Industrial 24V I/O controller featuring protected high-side and low-side outputs, multiplexed analog and digital inputs, and MCU-based control.
89 parts - 4 layers70.5 × 109.9 mm

- 2 layers89.5 × 49 mm

Circuit Board V2
Pierowheelz/ac-vent-controller
ESP32-based controller for Aircon Vents with stepper motors.
15 parts - 2 layers57.8 × 46 mm

Modul DPS
Poky88/HAPCAN_Modul_RFID_CTECKA
This repository contains complete hardware and software resources for the development and implementation of a new extension module for the HAPCAN home automation system.
52 parts
Questions
How big is the WindPCB PCB?
It measures 62.3 × 52.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the WindPCB use?
36 parts, built around the TSR 1-2433E, 74AHC1G14GV and NUP2105L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WindPCB KiCad files?
From the titio72/n2k_wind repository on GitHub, at the commit this page was made from: the board is WindPCB/WindPCB.kicad_pcb and its schematic WindPCB ADC/WindPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the WindPCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask titio72 before reusing the design.