
Dashboard
marcutudor79/electronic-module-for-the-dashboard-of-upbdrive-racing-car
My Bachelor's degree that consists of the electronic module for the Formula Student race car and it's testing module

Formula Student Telemetry system I've developed in my first year of University at UPB Drive
Dat is an open-source printed circuit board by timothy-joseph, from the timothy-joseph/timotelemetry_timounu repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 95.9 × 90.2 mm with 86 parts on 132 nets, routed with 759 tracks and 98 vias.
It is built around the ATA6563-GAQW1, CP2102-GMR and LORA-E5-HF, with the DM3CS-SF, MAX31331TETB+ and MIC29301-3.3WT among its other parts. Its parts include 17 capacitors, 17 resistors, 8 connectors, 7 ICs and 3 diodes.

Formula Student Telemetry system I've developed in my first year of University at UPB Drive
Kicad files are located in Hardware/ and all software in Software/ - th
firmware is located at Software/dat\_software, the GUI for the telemetry is
located at Software/flask_mqtt_server, and a helper program to load the
microsd logs in the interface is located at Software/dat_microsd_log_to_json
| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | ~ | mod:5002 | H10, H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23, H24, H25 +10 |
| 10 | 10k | Resistor_SMD:R_1210_3225Metric | R1, R2, R5, R6, R8, R9, R10, R11, R12, R13 |
| 9 | 0.1uF | Capacitor_SMD:C_1210_3225Metric | C2, C5, C6, C8, C9, C10, C11, C12, C16 |
| 6 | 1uF | Capacitor_SMD:C_1210_3225Metric | C1, C3, C4, C7, C17, C19 |
| 2 | 10uF | Capacitor_SMD:C_1210_3225Metric | C14, C15 |
| 2 | 1N5819HW-7-F | Diode_SMD:D_SOD-123 | D1, D4 |
| 2 | 2.2k | Resistor_SMD:R_1210_3225Metric | R14, R15 |
| 2 | 5.1k | Resistor_SMD:R_1210_3225Metric | R7, R17 |
| 2 | BCW65CLT1G | Package_TO_SOT_SMD:SOT-23-3 | Q1, Q2 |
| 2 | LOGO | LOGO | , G*** |
| 1 | 22.1k | Resistor_SMD:R_1210_3225Metric | R3 |
| 1 | 47.5k | Resistor_SMD:R_1210_3225Metric | R4 |
| 1 | 470 | Resistor_SMD:R_1210_3225Metric | R16 |
| 1 | ATA6563-GAQW1 | mod:SOIC127P600X175-8N | IC3 |
| 1 | CONUFL001-SMD-T | mod:CONN1_CONUFL_TEC | J6 |
| 1 | CP2102-GMR | mod:QFN28_5X5_SIL | U3 |
| 1 | DM3CS-SF | mod:DM3CS_SF | J5 |
| 1 | LoRa-E5 | mod:LoRa-E5 | U2 |
| 1 | M20-6102045 | mod:RHDR40W66P254_2X20_5146X500X1105P | J1 |
| 1 | MAX31331TETB+ | mod:SON50P300X300X80-11N | IC2 |
| 1 | MIC29301-3.3WT | Package_TO_SOT_THT:TO-220-5_Horizontal_TabDown | U5 |
| 1 | NX2012SA-32.768K-STD-MUB-1 | mod:NX2012SA32768KSTDMUB1 | Y1 |
| 1 | Power_header | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J4 |
| 1 | S8411-45R | mod:S8411-45R_1 | J7 |
| 1 | SMA-J-P-H-RA-TH1 | mod:SMAJPHRATH1 | J8 |
| 1 | SP0503BAHTG | mod:SP0503BAHTG | D3 |
| 1 | USB4800-03-A | mod:USB480003A | J9 |
| 1 | Uart_programming | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J3 |
| 1 | boot_button | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1 |
| 1 | lora_switch | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW3 |
| 1 | reset_button | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW2 |
| 1 | sim7600e-h-module-from-waveshare | mod:sim7600e_h_module_from_waveshare | U4 |
| 1 | ~ | mod:ESP32-S3-WROOM-1 | U1 |

marcutudor79/electronic-module-for-the-dashboard-of-upbdrive-racing-car
My Bachelor's degree that consists of the electronic module for the Formula Student race car and it's testing module

sanie07/Comms_CCTE-2026
Sistema de comunicación para el cohete suborbital URUTAU-III.


Kubakl11/CAN_Bus_Sniffer_BP
The bachelor’s thesis is focused on the design and implementation of a system for CAN bus data analysis for automotive monitoring.

Wolgamonox/me410-rowing
Firmware and electronics for the Syncrower project (EPFL course ME410)

Aharoni-Lab/MiniCAM
Using the Miniscope Software, multiple Miniscopes and MiniCAMs can be connected, streamed, and time-sync'ed recording simultaniously.

Aharoni-Lab/Miniscope-Wire-Free-DAQ
All information, guides, and tutorials can be found on the Miniscope-Wire-Free-DAQ Wiki Page .

It measures 95.9 × 90.2 mm and has 2 copper layers, 1.6 mm thick.
86 parts, built around the ATA6563-GAQW1, CP2102-GMR, LORA-E5-HF and DM3CS-SF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the timothy-joseph/timotelemetry_timounu repository on GitHub, at the commit this page was made from: the board is Hardware/PCB/dat.kicad_pcb and its schematic Hardware/PCB/dat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).