Skip to the content
2 layers55.9 × 30.5 mmCanfd transducer, the printed circuit board in 3D

Canfd transducer

Wolgamonox/me410-rowing

Firmware and electronics for the Syncrower project (EPFL course ME410)

Size
55.9 × 30.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
17
Pads
54
Tracks, vias
106, 0
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
19 Oct 2023
Updated
14 Dec 2023

Overview

Canfd transducer is an open-source printed circuit board by Wolgamonox, from the Wolgamonox/me410-rowing repository on GitHub. It is a 2-layer board of 55.9 × 30.5 mm with 12 parts on 17 nets, routed with 106 tracks and 0 vias.

It is built around the ATA6563-GAQW1. Its parts include 3 capacitors, 2 ICs, 2 connectors and 1 resistor.

Main components

1

README

README.md

me410-rowing

Parts

12
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopOnlyH1, H2, H3, H4
31uFCapacitor_SMD:C_0603_1608MetricC1, C2, C3
1120ohmResistor_SMD:R_0805_2012MetricR1
1ATA6563-GAQW1ATA6563-GAQW1:SOIC127P600X175-8NU2
1Conn_01x03_FemaleConnector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ2
1Conn_01x13_FemaleConnector_PinSocket_2.54mm:PinSocket_1x13_P2.54mm_VerticalJ1
1MCP2517FD-xSLPackage_SO:SOIC-14_3.9x8.7mm_P1.27mmU1

Similar boards

  • 2 layers43.8 × 31.8 mmCbb, the printed circuit board in 3D

    Cbb

    0x007E/cbb

    CAN-Bus Bridge

    33 parts
  • 4 layers45.5 × 51 mmCanBus Sniffer v1, the printed circuit board in 3D

    CanBus Sniffer v1

    Kubakl11/CAN_Bus_Sniffer_BP

    The bachelor’s thesis is focused on the design and implementation of a system for CAN bus data analysis for automotive monitoring.

    78 parts
  • 2 layers132 × 56 mmDashboard, the printed circuit board in 3D

    Dashboard

    marcutudor79/electronic-module-for-the-dashboard-of-upbdrive-racing-car

    My Bachelor's degree that consists of the electronic module for the Formula Student race car and it's testing module

    127 partsApache-2.0
  • 2 layers95.9 × 90.2 mmDat, the printed circuit board in 3D

    Dat

    timothy-joseph/timotelemetry_timounu

    Formula Student Telemetry system I've developed in my first year of University at UPB Drive

    86 partsGPL-3.0
  • 2 layersNrf bga, the printed circuit board in 3D

    Nrf bga

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    12 parts14kMIT
  • 2 layers66.9 × 74.5 mmDeskHop, the printed circuit board in 3D

    DeskHop

    hrvach/deskhop

    Fast Desktop Switching Device

    12 parts7.9kGPL-3.0
  • 2 layers40 × 15 mmSensors, the printed circuit board in 3D

    Sensors

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    12 parts3kApache-2.0
  • 2 layers42.7 × 56.5 mmTle6240 driver, the printed circuit board in 3D

    Tle6240 driver

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    12 parts1.2k

Questions

How big is the Canfd transducer PCB?

It measures 55.9 × 30.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Canfd transducer use?

12 parts, built around the ATA6563-GAQW1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Canfd transducer KiCad files?

From the Wolgamonox/me410-rowing repository on GitHub, at the commit this page was made from: the board is pcb_canfd/canfd_transducer/canfd_transducer.kicad_pcb and its schematic electronics/electronics.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Canfd transducer design in my own project?

Its repository states no licence, so its author keeps all rights: ask Wolgamonox before reusing the design.