Skip to the content
2 layers100 × 60 mmLaas stepper, the printed circuit board in 3D

Control 3 TMC2130 stepper driver via USB comands (TMX2130 + RP2350 / RP2040)

Size
100 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
59
Pads
225
Tracks, vias
367, 120
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
22 Apr 2025
Updated
8 Sep 2025

Overview

Laas stepper is an open-source printed circuit board by thomasfla, from the thomasfla/ARDUINO_PICO_TMC2130 repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 100 × 60 mm with 30 parts on 59 nets, routed with 367 tracks and 120 vias.

It is built around the TSR 1-2433E, DMG2301L and MSS1P4-M3. Its parts include 7 connectors, 5 capacitors, 4 resistors, 3 ICs and 1 diode. It belongs with the robots and motor control boards and the RP2040 boards of this library.

Main components

3

README

README.md

ARDUINO_PICO_TMC2130

Control 3 TMC2130 stepper driver via USB comands (TMX2130 + RP2350 / RP2040)

This is configured to control stepper motors of a bambulab A1 mini.

Hardware:

  • 3x SilentStepStick - TMC2130 Stepper Motor Driver
  • 1x Raspberry pi Pico2 dev board

USB Protocol:

The board will be seen as a virtual COM port.

Send target position, max velocity and max acceleration for all axis (in step, step/s, step/s2)

X 2000 1000 2000\n Y 500 1000 2000\n etc..

The driver will send at a chosen period the motor position and velocity: X 9030 0 Y 4340 0 Z 0 0

You can update the target position on the fly. This is usefull for reactive control given other feedback inputs.

Homing

The code includes a soft homing sequence that as been tuned for Bambulab A1 mini. This uses stallGuard feature of the tmc2130 drivers.

Parts

30
QtyValueFootprintReferences
4Conn_01x04_PinConnector_JST:JST_XA_B04B-XASK-1_1x04_P2.50mm_VerticalJ1, J2, J3, J5
4MountingHole_PadMountingHole:MountingHole_2.5mm_Pad_TopBottomH1, H2, H3, H4
4SilentStepStick-TMC2130TMC2301:Pololu_Breakout-16_15.2x20.3mmA1, A2, A3, A4
310kResistor_SMD:R_0805_2012MetricR1, R2, R3
3CCapacitor_SMD:C_1210_3225MetricC1, C3, C7
1100kPotentiometer_THT:Potentiometer_Bourns_3296W_VerticalRV1
1200kResistor_SMD:R_0805_2012MetricR4
122u 50VCapacitor_SMD:C_1210_3225MetricC2
1C_PolarizedCapacitor_THT:CP_Radial_D8.0mm_P3.80mmC8
1Conn_01x02Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ7
1Conn_01x02_PinConnector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_HorizontalJ4
1Conn_01x04Connector:NS-Tech_Grove_1x04_P2mm_VerticalJ8
1DMG2301LPackage_TO_SOT_SMD:SOT-23Q1
1MSS1P4-M3Diode_SMD:D_MicroSMP_AKD9
1PicoModule:RaspberryPi_Pico_Common_UnspecifiedU1
1TSR1-2433EConverter_DCDC:Converter_DCDC_TRACO_TSR1-xxxxE_THTU2
1~Library_custom:RCD-24_PLU3

More from thomasfla/ARDUINO_PICO_TMC2130

2
  • 2 layers52 × 30 mmLaas single stepper withdcdc, the printed circuit board in 3D

    Laas single stepper withdcdc

    thomasfla/ARDUINO_PICO_TMC2130

    Control 3 TMC2130 stepper driver via USB comands (TMX2130 + RP2350 / RP2040)

    20 partsBSD-3-Clause
  • 2 layers52 × 23 mmLaas single stepper, the printed circuit board in 3D

    Laas single stepper

    thomasfla/ARDUINO_PICO_TMC2130

    Control 3 TMC2130 stepper driver via USB comands (TMX2130 + RP2350 / RP2040)

    14 partsBSD-3-Clause

Similar boards

  • 4 layers155 × 75 mmGTI V5, the printed circuit board in 3D

    GTI V5

    fotherja/Grid_Tie_Inverter_V5

    Please refer to my site ( www.jamesfotherby.com ) where this project is being documented in detail

    165 parts47MIT
  • 2 layers133 × 97.8 mmResonant Converter V1, the printed circuit board in 3D

    Resonant Converter V1

    fotherja/CLLLC_DAB

    CLLLC Dual active Bridge resonant converter v1

    193 parts6MIT
  • 4 layers133.4 × 44.3 mmSignalSnagger, the printed circuit board in 3D

    SignalSnagger

    OpenARDF/SignalSnagger

    80m Radio Orienteering Receiver

    207 parts6MIT
  • 6 layers70 × 40.5 mmFMUv246-imported, the printed circuit board in 3D

    FMUv246-imported

    yagamy4680/drone-study

    AUAV-OpenSource/FMUv4-PixRacer is the open hardware design of PixHawk FMUv4. It uses STM32F427 and MPU6000. (github)

    290 parts
  • 2 layers160.5 × 146.5 mmSchemav2, the printed circuit board in 3D

    Schemav2

    rayanyahiaoui13/24PowerLEDsController

    The goal of this system is to provide independent and precise control of a 24-LED matrix composed of high-power LEDs to independently illuminate 24 wells of a Greiner plate containing duckweed.

    146 parts1GPL-3.0
  • 2 layers59 × 74.8 mmN2k meteo gps s3 tht, the printed circuit board in 3D

    N2k meteo gps s3 tht

    titio72/n2k_router_arduino

    Integrated GPS, meteo, tachometer, and speed sensor for NMEA2000 networks

    45 parts1GPL-3.0
  • 4 layers72.5 × 39.7 mmFOC RP2350, the printed circuit board in 3D

    FOC RP2350

    totaldesaster/SimpleFOC-Serial-Driver

    Advanced dual BLDC driver based on the RP2350 and DRV8323S ICs, designed to be controlled from a trajectory controller over RS-485, RS-422 or TTL UART. Features a compact high power design with two stacked PCBs.

    68 parts1GPL-3.0
  • 4 layers99 × 146 mmCarte principale, the printed circuit board in 3D

    Carte principale

    Unimakers/CDR-2027

    Ce repo est un site de documentation réalisé par l'équipe des première et deusième années pré-ingénieur de l'école Unilasalle-Amiens, membre de l'association de robotique Unimaker, dans le cadre de leur participation à…

    156 parts1

Questions

How big is the Laas stepper PCB?

It measures 100 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Laas stepper use?

30 parts, built around the TSR 1-2433E, DMG2301L and MSS1P4-M3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Laas stepper KiCad files?

From the thomasfla/ARDUINO_PICO_TMC2130 repository on GitHub, at the commit this page was made from: the board is hardware/laas_stepper/laas_stepper.kicad_pcb and its schematic hardware/laas_single_stepper/laas_single_stepper.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Laas stepper design in my own project?

Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).