Skip to the content
12

MSS1P4-M3

Vishay IntertechnologyExtended

-55℃~+150℃ 1 Independent 1A 200uA@40V 25A 40V 480mV@1A MicroSMP Schottky Diodes ROHS

Part id
vishay/MSS1P4-M3
Category
Schottky Diodes
Package
MicroSMP
Pins
2
In stock
22,174 at JLCPCB (C2980309)
Used on
9 open-source boards

Overview

The MSS1P4-M3 is a schottky Diode made by Vishay Intertechnology in a MicroSMP package with 2 pins. -55℃~+150℃ 1 Independent 1A 200uA@40V 25A 40V 480mV@1A MicroSMP Schottky Diodes ROHS.

PCBKit's library has its KiCad symbol (Device:D_Schottky, from KiCad's library) and its footprint (EasyEDA_Cloud:DO-219AD_L2.2-W1.3-L-RD_MSS2P2-M3-89A, from EasyEDA), ready for a KiCad board. 22,174 are in stock at JLCPCB (part C2980309). 9 open-source boards in 5 repositories on GitHub use it.

Symbol

Device:D_SchottkyFrom KiCad's library

Footprint

12
EasyEDA_Cloud:DO-219AD_L2.2-W1.3-L-RD_MSS2P2-M3-89AFrom EasyEDA

From the datasheet

9
Reverse voltage, most
40 V · repetitive peak reverse voltage, max · p. 1
Forward current, most
1 A · average forward rectified current, max · p. 1
Junction, hottest
150 °C · operating junction temperature, max · p. 1
Forward voltage
410 mV · IF = 0.5 A, TJ = 25 °C, typical · p. 2
Forward voltage
480 mV · IF = 1.0 A, TJ = 25 °C, typical · p. 2
Forward voltage
320 mV · IF = 0.5 A, TJ = 125 °C, typical · p. 2
Forward voltage
410 mV · IF = 1.0 A, TJ = 125 °C, typical · p. 2
Junction to air (MicroSMP (DO-219AD))
125 K/W · junction to ambient, 6.0 mm x 6.0 mm copper pad areas, typical · p. 2
Junction to case (MicroSMP (DO-219AD))
40 K/W · junction to case, top center of body, typical · p. 2

Open-source boards using it

9See all 9
  • 4 layers155 × 75 mmGTI V5, the printed circuit board in 3D

    GTI V5

    fotherja/Grid_Tie_Inverter_V5

    Please refer to my site ( www.jamesfotherby.com ) where this project is being documented in detail

    165 parts47MIT
  • 2 layers133 × 97.8 mmResonant Converter V1, the printed circuit board in 3D

    Resonant Converter V1

    fotherja/CLLLC_DAB

    CLLLC Dual active Bridge resonant converter v1

    193 parts6MIT
  • 4 layers133.4 × 44.3 mmSignalSnagger, the printed circuit board in 3D

    SignalSnagger

    OpenARDF/SignalSnagger

    80m Radio Orienteering Receiver

    207 parts6MIT
  • 2 layers100 × 60 mmLaas stepper, the printed circuit board in 3D

    Laas stepper

    thomasfla/ARDUINO_PICO_TMC2130

    Control 3 TMC2130 stepper driver via USB comands (TMX2130 + RP2350 / RP2040)

    30 partsBSD-3-Clause
  • 6 layers70 × 40.5 mmFMUv246-imported, the printed circuit board in 3D

    FMUv246-imported

    yagamy4680/drone-study

    AUAV-OpenSource/FMUv4-PixRacer is the open hardware design of PixHawk FMUv4. It uses STM32F427 and MPU6000. (github)

    290 parts
  • 2 layers52 × 23 mmLaas single stepper, the printed circuit board in 3D

    Laas single stepper

    thomasfla/ARDUINO_PICO_TMC2130

    Control 3 TMC2130 stepper driver via USB comands (TMX2130 + RP2350 / RP2040)

    14 partsBSD-3-Clause
  • 2 layers52 × 30 mmLaas single stepper withdcdc, the printed circuit board in 3D

    Laas single stepper withdcdc

    thomasfla/ARDUINO_PICO_TMC2130

    Control 3 TMC2130 stepper driver via USB comands (TMX2130 + RP2350 / RP2040)

    20 partsBSD-3-Clause
  • 4 layers50.5 × 36 mmFMU v171-imported, the printed circuit board in 3D

    FMU v171-imported

    yagamy4680/drone-study

    AUAV-OpenSource/FMUv4-PixRacer is the open hardware design of PixHawk FMUv4. It uses STM32F427 and MPU6000. (github)

    118 parts

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the MSS1P4-M3?

Yes. The symbol is Device:D_Schottky and the footprint EasyEDA_Cloud:DO-219AD_L2.2-W1.3-L-RD_MSS2P2-M3-89A, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MSS1P4-M3?

MicroSMP, with 2 pins. Its footprint is drawn on this page.

Where is the MSS1P4-M3 datasheet?

Vishay Intertechnology publishes it: the Datasheet link on this page opens it.

Where can I order the MSS1P4-M3?

JLCPCB lists it as part C2980309, with 22,174 in stock; the sellers' links on this page open their listings.

What can replace the MSS1P4-M3?

Parts like it in the library: the PMEG60T20ELXD-QX by Nexperia. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MSS1P4-M3?

9 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.