4 layers88 × 50 mm
2 layers48 × 17 mm
Display
TheUncleKai/bbsensorBBQ Sensor
- Size
- 48 × 17 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 20
- Pads
- 43
- Tracks, vias
- 74, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Aug 2019
- Updated
- 7 Mar 2020
Overview
Display is an open-source printed circuit board by TheUncleKai, from the TheUncleKai/bbsensor repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 48 × 17 mm with 6 parts on 20 nets, routed with 74 tracks and 0 vias.
It is built around the 74HC595. Its parts include 2 resistors, 2 ICs, 1 capacitor and 1 connector. It belongs with the lEDs and displays and sensors and measurement boards of this library.
Main components
1README
README.mdbbsensor
BBQ Sensor
The 8 is a simple temperature monitor intended for BBQ/Smoker. It has 8 inlets that can be used with PTC or Pt100 probes. The BBSensor is run by a ESP8266 Microcontroller (NodeMCU Lua Lolin V3 Modul). The temperature can be delivered either via the display or network.
Front view
Back view
Top view
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100n | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C301 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R301 |
| 1 | 2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R302 |
| 1 | 74HC595 | Package_DIP:DIP-16_W7.62mm_Socket | U3 |
| 1 | Conn_01x05 | Molex:Molex_KK256_Pin_Header_Straight_1x05 | J1 |
| 1 | HD44780 | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | U4 |
Questions
How big is the Display PCB?
It measures 48 × 17 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Display use?
6 parts, built around the 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Display KiCad files?
From the TheUncleKai/bbsensor repository on GitHub, at the commit this page was made from: the board is hardware/Display/pcb/Display.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Display design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from TheUncleKai/bbsensor
7- 2 layers154 × 126 mm
- 4 layers88 × 50 mm
- 2 layers105 × 63 mm
- 2 layers116 × 91 mm
- 2 layers44 × 29 mm
- 2 layers29 × 29 mm
Similar boards
- 2 layers45.7 × 31.8 mm
LEDx16 board
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
36 parts803MIT - 2 layers228.6 × 100 mm
Mongus48
ChrisChrisLoLo/beyblock20
The magnetic, modular, 20-key macropad that can join together to form an ortholinear board
124 parts335GPL-3.0 - 2 layers245.1 × 160 mm
8-Bit CPU 32k
slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.
139 parts326 - 2 layers100 × 95.1 mm
Protoboard-6x4-breakout
electroniceel/protoboard
Advanced protoboard layout with 1.27mm pitch for smd parts
4,745 parts311CC-BY-4.0 - 4 layers140 × 100 mm
Dc usv
TobleMiner/DC-UPS
A small DC UPS, designed to keep small appliances like consumer network equipment running during power outages
351 parts223CERN-OHL-P-2.0 - 2 layers100.5 × 218.3 mm
- 2 layers287.8 × 126.7 mm
- 2 layers100 × 100 mm
