2 layers154 × 126 mm
4 layers88 × 50 mm
BBMini3
TheUncleKai/bbsensorBBQ Sensor
- Size
- 88 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 105
- Nets
- 135
- Pads
- 439
- Tracks, vias
- 0, 0
- Pours
- 2
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Aug 2019
- Updated
- 7 Mar 2020
Overview
BBMini3 is an open-source printed circuit board by TheUncleKai, from the TheUncleKai/bbsensor repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 88 × 50 mm with 105 parts on 135 nets.
It is built around the CP2104EK, ESP8266EX and OPA2340PA, with the LM2672M-5.0, MCP3202-CI/P and 74HC595 among its other parts. Its parts include 32 resistors, 23 capacitors, 14 ICs, 4 switches and 3 diodes. It belongs with the sensors and measurement boards and the ESP8266 boards of this library.
Main components
9CP2104EK
-- USB Conversion Modules ROHSSilicon LabsUSB Conversion Modules
ESP8266EX
QFN-32-EP(5x5)-40℃~+125℃ -91dBm 120mA 2.4GHz 2.4GHz~2.4835GHz 2.5V~3.6V 21.5dBm 50mA 72.2Mbps SPI、UART、I2C、I2S WiFi transceiver QFN-32-EP(5x5) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICs
OPA2340PA
PDIP-8-40℃~+85℃ 0.2pA 0.2pA 150uV 2 2.5uV/℃ 2.7V~5.5V 25nV/√Hz@1kHz 5.5MHz 50mA 6V/us 750uA 80dB Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
LM2672M-5.0
SOIC-8-40℃~+125℃@(TJ) 1 1A 260kHz 5V 6.5V~40V Buck Buck Built-in Fixed No SOIC-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersMCP3202-CI/P
PDIP-8-40℃~+85℃ 12 2 2.7V~5.5V 2LSB 50kHz、100kHz 5uA 900kHz、1.8MHz External External No SAR SPI PDIP-8 Analog to Digital Converters (ADC) ROHSMicrochip TechnologyAnalog To Digital Converters (ADC)
74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
SN74LVC1G139DCU
VSSOP-8-0.5mm-40℃~+85℃ 1.65V~5.5V 10uA 2/4 32mA 32mA 4.9ns@3.3V,15pF 74LVC Decoder Power-off protection、Level shifting Single Supply VSSOP-8-0.5mm Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, Decoders
ABM8-26.000MHZ-10-1-U-T
SMD3225-4P-10℃~+60℃ 10pF 26MHz 50Ω SMD crystal oscillator ±10ppm ±10ppm SMD3225-4P Crystals ROHSAbraconCrystals
README
README.mdbbsensor
BBQ Sensor
The 8 is a simple temperature monitor intended for BBQ/Smoker. It has 8 inlets that can be used with PTC or Pt100 probes. The BBSensor is run by a ESP8266 Microcontroller (NodeMCU Lua Lolin V3 Modul). The temperature can be delivered either via the display or network.
Front view
Back view
Top view
Parts
105| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R3, R4, R6, R15, R16, R17, R105, R106, R201, R202, R203, R205 |
| 11 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C8, C9, C10, C14, C15, C16, C17, C18, C19, C20 |
| 8 | AudioJack3 | Lumberg:LUMBERG_1501_05 | TH1, TH2, TH3, TH4, TH5, TH6, TH7, TH8 |
| 4 | 2k2 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9, R10, R12, R104 |
| 4 | MountingHole_3.2mm_M3_DIN965_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | ~, ~, ~, ~ |
| 4 | ~ | TestPoint:TestPoint_Pad_D1.5mm | W1, W4, W7, W9 |
| 3 | 100n | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C201, C202, C203 |
| 3 | 200 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7, R108, R110 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3 |
| 2 | 10p | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C12, C13 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C5, C6 |
| 2 | 220 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R14 |
| 2 | 2k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R13, R111 |
| 2 | 74HC595 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U7, U9 |
| 2 | L | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L2, L3 |
| 2 | OPA2340 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U12, U13 |
| 2 | SW_Push | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW3, SW4 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R204 |
| 1 | 100u | Capacitor_SMD:CP_Elec_8x10 | C1 |
| 1 | 10k | Potentiometer_SMD:Potentiometer_Bourns_3269W_Vertical | RV206 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3 |
| 1 | 12k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8 |
| 1 | 140 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5 |
| 1 | 1N5822 | Diode_SMD:D_SOD-323_HandSoldering | D1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R11 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C7 |
| 1 | 300 | Potentiometer_SMD:Potentiometer_Bourns_3269W_Vertical | R102 |
| 1 | 405 | Potentiometer_SMD:Potentiometer_Bourns_3269W_Vertical | R101 |
| 1 | 470 | Potentiometer_SMD:Potentiometer_Bourns_3269W_Vertical | R109 |
| 1 | 47u | Inductor_SMD:L_TDK_SLF7032 | L1 |
| 1 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R107 |
| 1 | 5p6 | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C11 |
| 1 | 68u | Capacitor_SMD:CP_Elec_6.3x5.9 | C4 |
| 1 | ABM8-26.000MHZ-10-1-U-T | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y1 |
| 1 | ADG707 | Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm | U8 |
| 1 | ADG709 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U10 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | AT25SF081-SSHF-X | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | Antenna_Shield | RF_Antenna:Texas_SWRA117D_2.4GHz_Left | AE1 |
| 1 | CP2104 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U14 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | ESP8266EX | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U3 |
| 1 | Fuse | Schurter:Fuse_holder_20x5_22.5 | F1 |
| 1 | HD44780 | Collection:HD44780_LCD_2x16 | U6 |
| 1 | LED | LED_THT:LED_D3.0mm | D3 |
| 1 | LM2672M-5.0 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | MBT2222ADW1T1 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
| 1 | MCP3202 | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U11 |
| 1 | POWER | LED_THT:LED_D3.0mm | D2 |
| 1 | SN74LVC1G139 | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U5 |
| 1 | SW_Push | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW2 |
| 1 | SW_SPDT | Button_Switch_THT:SW_E-Switch_EG1224_SPDT_Angled | SW1 |
| 1 | USB_B_Mini | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
Questions
How big is the BBMini3 PCB?
It measures 88 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the BBMini3 use?
105 parts, built around the CP2104EK, ESP8266EX, OPA2340PA and LM2672M-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BBMini3 KiCad files?
From the TheUncleKai/bbsensor repository on GitHub, at the commit this page was made from: the board is hardware/Mini3/pcb/BBMini3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BBMini3 design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from TheUncleKai/bbsensor
7- 4 layers88 × 50 mm
- 2 layers105 × 63 mm
- 2 layers116 × 91 mm
- 2 layers44 × 29 mm
- 2 layers29 × 29 mm
- 2 layers48 × 17 mm
Similar boards
- 4 layers65.6 × 41.4 mm
- 4 layers51 × 61 mm
Gameboy MBC5 Cart QUAD FLASH - FRAM - 4-8MB
sillyhatday/GAMEBOY-MBC5-QUAD-8MB
8MB Gameboy cart using only 2MB flash chips
19 parts10CC-BY-SA-4.0 - 4 layers90 × 36 mm
A3-before crystal refinement
bdini13/esp32-cc1101-multiband
Work-in-progress ESP32-WROOM-32E + CC1101 multiband PCB: software-selected 315/433/868/915 MHz paths. AI-assisted engineering draft; not manufacturing-ready.
121 parts1 - 4 layers21.3 × 16.3 mm
QN8007B Breakout Board
florisvde/QN8007B-Breakout-Board
Breakout board for the Quintic QN8007B single-chip stereo FM transmitter with RDS.
22 parts1 - 4 layers36.4 × 44.1 mm
- 2 layers49 × 52 mm
FDU-3
EricSFR/Simple-Projects
In this repository i'll show some of my projects, manly for the ubniversity
11 parts - 4 layers55.3 × 70.2 mm
FCC KiCAD
nikphillydev/NP1_DRONE
Building a quadcopter from scratch. Hardware and software. Developed using STM32 microcontroller and FreeRTOS.
116 parts3MIT - 4 layers93 × 93 mm
FCSat dual
SunnyYoshimitsu/Reconfigurable-Space-Compute-Cluster
Here will be the repository for an "extremely reconfigurable satellite" aimed toward at competing in NASA Minds and hopefully assist Artemis in its missions.
215 parts3