4 layers88 × 50 mm
2 layers29 × 29 mm
BBQ Sensor
- Size
- 29 × 29 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 7
- Pads
- 22
- Tracks, vias
- 29, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Aug 2019
- Updated
- 7 Mar 2020
Overview
PTC is an open-source printed circuit board by TheUncleKai, from the TheUncleKai/bbsensor repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 29 × 29 mm with 10 parts on 7 nets, routed with 29 tracks and 0 vias.
Its parts include 3 resistors, 1 capacitor, 1 connector and 1 switch. It belongs with the sensors and measurement boards of this library.
README
README.mdbbsensor
BBQ Sensor
The 8 is a simple temperature monitor intended for BBQ/Smoker. It has 8 inlets that can be used with PTC or Pt100 probes. The BBSensor is run by a ESP8266 Microcontroller (NodeMCU Lua Lolin V3 Modul). The temperature can be delivered either via the display or network.
Front view
Back view
Top view
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3 |
| 2 | ~ | MountingHole:MountingHole_2.5mm_Pad | ~, ~ |
| 1 | 100 | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C1 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3296Z_Horizontal | RV1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | SW_SP3T | ALPS:ALPS_SSSS211900 | SW1 |
| 1 | Thermistor_PTC | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | TH1 |
Questions
How big is the PTC PCB?
It measures 29 × 29 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PTC use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PTC KiCad files?
From the TheUncleKai/bbsensor repository on GitHub, at the commit this page was made from: the board is hardware/PTC/pcb/PTC.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PTC design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from TheUncleKai/bbsensor
7- 2 layers154 × 126 mm
- 4 layers88 × 50 mm
- 2 layers105 × 63 mm
- 2 layers116 × 91 mm
- 2 layers44 × 29 mm
- 2 layers48 × 17 mm
Similar boards
- 2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0 - 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0