2 layers19 × 106 mm
2 layers72 × 85 mm
Trap basic pcb
TheCacophonyProject/trap-basic-pcb- Size
- 72 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 44
- Pads
- 111
- Tracks, vias
- 129, 12
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Sep 2020
- Updated
- 11 Sep 2020
Overview
Trap basic pcb is an open-source printed circuit board by TheCacophonyProject, from the TheCacophonyProject/trap-basic-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 72 × 85 mm with 33 parts on 44 nets, routed with 129 tracks and 12 vias.
It is built around the AMS1117-5.0 and PCF8523T. Its parts include 10 resistors, 5 diodes, 5 connectors, 4 transistors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
AMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
PCF8523T
SOIC8Real-Time Clock (RTC) and calendarNXP SemiconductorsUncategorised
README
README.mdtrap-basic-pcb
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R4, R6, R7, R8, R9 |
| 4 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 3 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R3, R5 |
| 3 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H1, H2, H3 |
| 2 | D | Diode_SMD:D_SMA | D4, D5 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Battery_Cell | footprints:CR1220 | BT1 |
| 1 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | Crystal | Crystal:Crystal_DS26_D2.0mm_L6.0mm_Vertical | Y1 |
| 1 | PCF8523T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | PIR_1 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J1 |
| 1 | PIR_1_LED | LED_THT:LED_D3.0mm | D3 |
| 1 | PIR_2 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J2 |
| 1 | PIR_2_LED | LED_THT:LED_D3.0mm | D2 |
| 1 | STATUS_LED | LED_THT:LED_D3.0mm | D1 |
| 1 | SW_DIP_x01 | Button_Switch_THT:Push_E-Switch_KS01Q01 | SW1 |
| 1 | Servo_1 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J3 |
| 1 | Servo_2 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J4 |
Questions
How big is the Trap basic pcb PCB?
It measures 72 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Trap basic pcb use?
33 parts, built around the AMS1117-5.0 and PCF8523T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Trap basic pcb KiCad files?
From the TheCacophonyProject/trap-basic-pcb repository on GitHub, at the commit this page was made from: the board is trap-basic-pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Trap basic pcb design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers158 × 85 mm
- 2 layers36 × 29.3 mm
Ble mvp 1b rev0
saewoonam/ble_adv_covid
Repo to implement the advertise and scanner portion for bluetooth to enable encounter/exposure tracing (e.g. Apple/Google / TCN / etc...) on a nRF52840 based battery powered dongle/device
71 parts10 - 2 layers115 × 100 mm
Cog1
diegodemarco/cog1
cog1 is an open-source industrial IoT gateway (hardware and software) built as a motherboard hosting an Orange Pi Zero 3 Linux SBC.
133 parts6MIT - 2 layers104 × 43.3 mm
Serial snooper
can-caglar/Data-Logger-STM32
The Serial Snooper is a UART data logger with automatic baud rate detection, real-time data stamping and a command-line-interface for configuration, running on an STM32F3 microcontroller.
101 parts4 - 2 layers49.5 × 106 mm
Supra board
jsenzel1/supra
is multimode Eurorack module with 4 different experiments in long term time. you can run up to 2 modes at once. use the 4 way joystick and buttons to interact with the modes on the oled
119 parts4 - 2 layers48.3 × 123.8 mm
Altimeter v2
pimbongaerts/altimeter
Underwater sonar/USBL interface for photogrammetry surveys. PCB design files and Arduino code.
74 parts4 - 2 layers
