
Motion control
menloresearch/asimov-1
v1 of Asimov, an open-source humanoid robot

Library for electronic cad. (Kicad and Eagle)
Tera 4 layer -- STM32F4 is an open-source printed circuit board by TERA-TU-Graz, from the TERA-TU-Graz/ECad_Library repository on GitHub. It is a 4-layer board with 53 parts on 86 nets, routed with 161 tracks and 14 vias.
It is built around the SN65HVD230D. Its parts include 12 diodes, 10 resistors, 5 connectors, 4 capacitors and 3 ICs. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | Jumper_NO_Small | tera_general:SOLDERJUMPER_2 | JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10 |
| 4 | 60R | tera_rlc:C_0805in | R24, R25, R27, R28 |
| 4 | LED | tera_diodes:LED_0805 | D18, D19, D22, D23 |
| 4 | SUPPRESSOR | tera_sot:SOT-23 | D12, D13, D14, D15 |
| 2 | 100n | tera_rlc:C_0805in | C23, C24 |
| 2 | 12k | tera_rlc:C_0805in | R29, R30 |
| 2 | 18V | tera_diodes:DO-214AA_with_vias_in_pad | D16, D17 |
| 2 | 47nF | tera_rlc:C_0805in | C15, C16 |
| 2 | 56k | tera_rlc:C_0805in | R23, R26 |
| 2 | CAN_CON | tera_Connectors_Phoenix:CIOC_4-1-FV | P17, P18 |
| 2 | CM_CHOKE | tera_rlc:L_ACT45B-XXX-2P_common-mode-choke | L1, L2 |
| 2 | SN65HVD230 | tera_atomic_ic:SN65HVD230 | U3, U4 |
| 2 | SWITCH_02x2POS | TE_switches:TE_1825360-1 | S1, S2 |
| 1 | 2k2 | tera_rlc:C_0805in | R32 |
| 1 | 3V3 | tera_general:DO-216AA | D21 |
| 1 | 5V | tera_general:DO-216AA | D20 |
| 1 | 5k6 | tera_rlc:C_0805in | R31 |
| 1 | CONN_01X02_12V_CRTL | tera_Connectors_JST:JST_XH_B02B-XH-A_02x2.50mm_Straight | P19 |
| 1 | CONN_01X02_12V_PWR | tera_Connectors_Phoenix:MCV_1.5_2-GF-3.5 | P20 |
| 1 | DCDC_Stepdown_v6-3V3 | Boards_Tera:DCDC_Stepdown_v6 | PS1 |
| 1 | DCDC_Stepdown_v6-5V | Boards_Tera:DCDC_Stepdown_v6 | PS2 |
| 1 | HolyRoly_v2 | Boards_Tera:HolyRoly_v2 | U1 |
| 1 | TERA_DEBUG | tera_general:TERA_DEBUG | P3 |
The 49 most common of 53 parts.

menloresearch/asimov-1
v1 of Asimov, an open-source humanoid robot

tenderlove/initial-v
It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim



hirakuni45/RX
Renesas RX Microcontroller, C++ framework, Library, Sample

henrikssn/TurboCAN
This is the official repository for the TurboCAN controller board, designed specifically for the Voron AfterBurner toolhead but can also be used on similar toolheads using NEMA17 steppers.

VIPQualityPost/lemon-pepper-stepper
simplefoc all-in-one 50W hybrid stepper + bldc driver

luftaquila/monolith
DIY wireless real-time datalogging platform for Student Formula and Baja.
53 parts, built around the SN65HVD230D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the TERA-TU-Graz/ECad_Library repository on GitHub, at the commit this page was made from: the board is kicad/tera_templates/tera_4_layer -- STM32F4/tera_4_layer -- STM32F4.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask TERA-TU-Graz before reusing the design.