Skip to the content
2 layers99.7 × 74.9 mmC64 Joykey, the printed circuit board in 3D

WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

Size
99.7 × 74.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
62
Nets
62
Pads
204
Tracks, vias
547, 56
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
3 Dec 2020
Updated
14 Jan 2025

Overview

C64 Joykey is an open-source printed circuit board by tebl, from the tebl/C64-JoyKEY repository on GitHub. It is a 2-layer board of 99.7 × 74.9 mm with 62 parts on 62 nets, routed with 547 tracks and 56 vias.

Its parts include 21 resistors, 12 switches, 11 diodes, 2 connectors and 1 transistor. It belongs with the retro computing and games and keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

README

README.md

C64 JoyKEY

The C64 JoyKEY was born out of the desire to build my own joystick, and after having a look at the various options available I chose to build one using Cherry MX keyboard switches. They are around a dollar per piece, so after getting it all to work properly on my beloved Commodore 64 I looked into using it with a whole selection of vintage computer systems as well. There are two main versions of the C64 JoyKEY, the keyboard-variant already described and a board designed for use with Sanwa arcade parts instead.

Last build Last arcade

With options to handle multiple types of systems comes complexity, you'll have to make a few decisions on what you want out of the C64 JoyKEY. Do I only want to use it as a joystick replacement on vintage systems, ideally with 2-3 fire buttons where supported? If so, then you won't need the Arduino Pro Micro.

Want to use it on a modern system as a WASD-style keyboard or a gamepad, then install it - a common use of these types of devices is as a macro-keyboard or a stream-deck. Note that compared to many similar solutions, the microcontroller is not required for use with any of the vintage systems - the adapters actually follow the original circuit descriptions for controllers used with the actual vintage computers. What that means is that there is truly no chance of lag added by the controller. Ever.

The pictures below show the unit when connected to my Commodore 64, including the jumper settings used with it. As I've tried to keep things as close to the standard usually associated with Atari-style joysticks, there are two joystick connectors - this is because a lot of the Commodore 64 games supported using a second joystick for specific game functions.

Commodore 64 C64 Configuration

As with most C64 games port 2 is the one to use, port 1 is just there to connect additional fire buttons. When in doubt, just connect a cable for port 2 and you should have a good time. This was labelled after the way the controller is used on the Commodore 64.

Getting one

I won't be selling these, so if you want one you will probably have to build it yourself (or call your favourite friend, ideally someone with a reasonable quality soldering iron). I've created a separate documents on building a C64 JoyKEY, this is also where you'll find the BOM for this project (a list of needed parts and links to where PCBs can be ordered).

As with all things you're soldering together by yourself, the one who soldered it takes responsibility for it. I'll try answer any opened tickets as far as I am able, but know that this is a hobby-grade project and I might be busy on spending the little energy I have on other things (be patient, check out the schematic while you wait).

Setting it up

The C64 JoyKEY has a handful of jumpers that need to be set correctly in order to: A - function, B - not destroy your precious vintage computer and/or consoles. The necessary details have been put into a separate configuration-document, check it out for some information on the systems I've attempted to use the C64 JoyKEY with.

Parts

62
QtyValueFootprintReferences
910kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR5, R14, R15, R16, R17, R18, R19, R20, R21
9330Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3, R4, R6, R7, R8, R9, R10, R11, R12
7LEDLED_THT:LED_Rectangular_W3.0mm_H2.0mmD5, D6, D7, D8, D9, D10, D11
4Mountingmounting:M3_pinM1, M2, M3, M4
2270Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR13
11n4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD4
11n5819Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD3
12N39042n3904:2N3904_TO-92_Horizontal_FlatSideDownQ1
1ARD_ENConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP9
1Arduino_Pro_Microarduino_pro_micro:Arduino_Pro_MicroA1
1DEFAULT_FWsolder_bridge:bridge_rJP6
1DEFAULT_FWsolder_bridge:bridgeJP4
1DOWNButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW5
1F2_POLConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJP1
1F3_POLConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJP2
1FIRE3_SELConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJP3
1KEY_LEDConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_HorizontalJP7
1LED_SELsolder_bridge:selectJP5
1LEFTButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW6
1LOGOlogo:c64_joykeyG***
1P1_FIRE1Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx31-2LFSSW9
1P1_FIRE2Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx31-2LFSSW10
1P1_FIRE3Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx31-2LFSSW11
1P1_FIRE4Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx31-2LFSSW12
1P2_FIRE1Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1
1P2_FIRE2Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW2
1P2_FIRE3Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW3
1PWRLED_THT:LED_D5.0mmD1
1Port_1C64 IDC:IDC_JoystickJ1
1Port_2C64 IDC:IDC_JoystickJ2
1RESETButton_Switch_THT:SW_PUSH_6mmSW8
1RIGHTButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW7
1SYSLED_THT:LED_D5.0mmD2
1UPButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW4
1VCC_ENConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP8

More from tebl/C64-JoyKEY

12
  • 2 layers99.7 × 74.9 mmC64 Joykey 2040, the printed circuit board in 3D

    C64 Joykey 2040

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    69 parts27
  • 2 layers99.7 × 55.2 mmC64 Arcade, the printed circuit board in 3D

    C64 Arcade

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    49 parts27
  • 2 layers58.4 × 38.1 mmAmiga CD32, the printed circuit board in 3D

    Amiga CD32

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    30 parts27
  • 2 layers81.9 × 52.7 mmArcade 2040, the printed circuit board in 3D

    Arcade 2040

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    29 parts27
  • 2 layers58.4 × 38.1 mmNEC PC Engine, the printed circuit board in 3D

    NEC PC Engine

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    26 parts27
  • 2 layers58.4 × 43.8 mmGameport, the printed circuit board in 3D

    Gameport

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    24 parts27
  • 2 layers70.7 × 46.7 mmAdapter 9 from 2040, the printed circuit board in 3D

    Adapter 9 from 2040

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    21 parts27
  • 2 layers58.4 × 38.1 mmSega Mega Drive, the printed circuit board in 3D

    Sega Mega Drive

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    21 parts27
  • 2 layers58.4 × 38.1 mmNES, the printed circuit board in 3D

    NES

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    20 parts27
  • 2 layers29.2 × 31.8 mmAtari 7800, the printed circuit board in 3D

    Atari 7800

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    10 parts27
  • 2 layers10.4 × 55.2 mmC64 SkeletonKey, the printed circuit board in 3D

    C64 SkeletonKey

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    5 parts27
  • 2 layers29.2 × 18.4 mmSega Master System, the printed circuit board in 3D

    Sega Master System

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    4 parts27

Similar boards

  • 2 layers139.3 × 113.8 mmFlake L, the printed circuit board in 3D

    Flake L

    lever-tech/flake

    An open-source, wireless, split ergonomic keyboard designed to be productive, healthy, and enjoyable. [formerly Anywhy Flake]

    62 parts531CERN-OHL-W-2.0
  • 2 layers97 × 78.5 mmDumbpad, the printed circuit board in 3D

    Dumbpad

    imchipwood/dumbpad

    Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

    62 parts517GPL-2.0
  • 2 layers60 × 37 mmHydraBus, the printed circuit board in 3D

    HydraBus

    hydrabus/hydrabus

    HydraBus open source multi-tool for anyone interested in learning/developping/debugging/hacking/Penetration Testing for basic or advanced embedded hardware

    62 parts359
  • 2 layers90 × 50 mmTomu fpga, the printed circuit board in 3D

    Tomu fpga

    im-tomu/fomu-hardware

    Tomu FPGA (Fomu for short), a FPGA which fits inside your USB port!

    62 parts236CC-BY-SA-4.0
  • 2 layers118 × 103.5 mmEV Charger2, the printed circuit board in 3D

    EV Charger2

    fotherja/EV_Charger

    Arduino Uno Code for EV Charger

    62 parts167MIT
  • 2 layers68.6 × 107.3 mmBaby 8, the printed circuit board in 3D

    Baby 8

    mzuelch/CATs-Eurosynth

    Analog Synth Eurorack Modules

    62 parts166MIT
  • 2 layers79.3 × 20.7 mmSTW2915, the printed circuit board in 3D

    STW2915

    schlae/VapeRE

    Reverse engineered disposable v a p e boards

    62 parts136
  • 2 layers20.3 × 50.4 mmCh32v003f4u6 opendant, the printed circuit board in 3D

    Ch32v003f4u6 opendant

    cnlohr/cnhardware

    My dumping grounds for all my kicad projects and random hardware bringup.

    62 parts114

Questions

How big is the C64 Joykey PCB?

It measures 99.7 × 74.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the C64 Joykey use?

62 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the C64 Joykey KiCad files?

From the tebl/C64-JoyKEY repository on GitHub, at the commit this page was made from: the board is C64 Joykey/C64 Joykey.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the C64 Joykey design in my own project?

Its repository states no licence, so its author keeps all rights: ask tebl before reusing the design.