Skip to the content
2 layers90 × 50 mmTomu fpga, the printed circuit board in 3D

Tomu FPGA (Fomu for short), a FPGA which fits inside your USB port!

Size
90 × 50 mm
Copper layers
2
Thickness
2.4 mm
Parts
62
Nets
69
Pads
273
Tracks, vias
919, 162
Pours
15
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
4 Nov 2018
Updated
10 Jan 2023

Overview

Tomu fpga is an open-source printed circuit board by im-tomu, from the im-tomu/fomu-hardware repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 90 × 50 mm with 62 parts on 69 nets, routed with 919 tracks and 162 vias.

It is built around the ICE40UP5K-SG48I. Its parts include 27 capacitors, 10 resistors, 10 ICs, 8 diodes and 4 switches. It belongs with the fPGA and programmable logic boards and the FPGA and CPLD boards of this library.

Main components

1

README

README.md

Tomu FPGA

An FPGA in your USB port!

Hardware

The hardware design files are all in the hardware/ directory. They were designed using KiCad 5.0.

Parts

62
QtyValueFootprintReferences
110805, 1uF, 10V, X5R, 20%tomu-fpga:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC1, C2, C3, C5, C8, C9, C10, C13, C17, C24, C25
80805, 100nF, 10V, X5R, 20%tomu-fpga:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC4, C7, C11, C15, C20, C21, C23, C28
6D_Smalltomu-fpga:TVM-5VD2, D3, D4, D5, D7, D8
50805, 10nF, 10V, X5R, 20%tomu-fpga:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC6, C14, C18, C26, C27
30805, 1.5k, 1/16W, 1%tomu-fpga:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR2, R8, R9
20805, 10k, 1/16Wtomu-fpga:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR1, R3
20805, 10k, 1/16W (DNP)tomu-fpga:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR4, R13
20805, 1uF, 10V, X5R, 20% (DNP)tomu-fpga:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC16, C19
20805, 22ohm, 1/16W, 1%tomu-fpga:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR11, R12
10805, 100ohm, 1/16W, 1%tomu-fpga:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR10
10805, 10uF, 10V, X5R, 20%tomu-fpga:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC22
12x20 pin 0.1" female headertomu-fpga:PinHeader_2x20_P2.54mm_VerticalJ1
15tomu-fpga:SPST-NO-ButtonSW4
16tomu-fpga:SPST-NO-ButtonSW3
1Captouch Padstomu-fpga:TouchpadsSW2
1Crystal Oscillatortomu-fpga:XTAL-2520U7
1D_Smalltomu-fpga:TVM-12VD6
1ICE40UP5K-SG48Itomu-fpga:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mmU5
1LDO-SOT23-1.2Vtomu-fpga:SOT-23-5_HandSolderingU1
1LDO-SOT23-1.2V (DNP)tomu-fpga:SOT-23-5_HandSolderingU8
1LDO-SOT23-2.5Vtomu-fpga:SOT-23-5_HandSolderingU3
1LDO-SOT23-3.3Vtomu-fpga:SOT-23-5_HandSolderingU2
1MEMS Oscillator (DNP)tomu-fpga:MEMS-20005625BU6
1PMODatomu-fpga:Pin_Header_Straight_1x06_Pitch2.54mmJ3
1PMODbtomu-fpga:Pin_Header_Straight_1x06_Pitch2.54mmJ2
1Power LEDtomu-fpga:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1
1RGB-LEDtomu-fpga:LED-RGB-5DS-UHD1110-FKAU10
1Resettomu-fpga:SPST-NO-ButtonSW1
1SPI Flashtomu-fpga:SOIC-8U4
1USB-Btomu-fpga:USB-BU9

Similar boards

  • 2 layers78 × 60 mmIce viz, the printed circuit board in 3D

    Ice viz

    muni-works/vcad

    BRep CAD kernel in Rust/WASM

    44 parts442Apache-2.0
  • 4 layers22.9 × 61 mmPico ice, the printed circuit board in 3D

    Pico ice

    tinyvision-ai-inc/pico-ice

    Raspberry Pi PICO board + Lattice iCE40 FPGA's

    109 parts203MIT
  • 4 layers17.8 × 38.1 mmReDIP SID, the printed circuit board in 3D

    ReDIP SID

    daglem/reDIP-SID

    MOS 6581 / 8580 SID FPGA emulation platform

    103 parts121
  • 4 layers26 × 44 mmFramework oscilloscope, the printed circuit board in 3D

    Framework oscilloscope

    jlcjak/frameoscope

    oscilloscope expansion card / module for framework laptops

    87 parts87
  • 4 layers27.9 × 63.5 mmPico2-ice, the printed circuit board in 3D

    Pico2-ice

    tinyvision-ai-inc/pico2-ice

    Doc | Hardware | SDK | Schematic | Assembly | Discord

    124 parts60MIT
  • 4 layers55 × 50 mmInterface2, the printed circuit board in 3D

    Interface2

    lowobservable/coax

    Connect to IBM 3270 hardware

    68 parts53ISC
  • 4 layers17.8 × 50.8 mmReDIP RIOT, the printed circuit board in 3D

    ReDIP RIOT

    daglem/reDIP-RIOT

    MOS 6530 RRIOT / MOS 6532 RIOT replacement

    45 parts26CERN-OHL-S-2.0
  • 2 layers187 × 152 mmKiss masterboard, the printed circuit board in 3D

    Kiss masterboard

    squarewavedot/ledcubeelectronics

    LEDCube battery and masterboard electronics

    163 parts22

Questions

How big is the Tomu fpga PCB?

It measures 90 × 50 mm and has 2 copper layers, 2.4 mm thick.

What parts does the Tomu fpga use?

62 parts, built around the ICE40UP5K-SG48I. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tomu fpga KiCad files?

From the im-tomu/fomu-hardware repository on GitHub, at the commit this page was made from: the board is archive/evt/pcb/tomu-fpga.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tomu fpga design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).