
Twonkie
dojoe/Twonkie
A USB-PD sniffer/injector/sink based on Google's Twinkie, re-designed to be manufactured by mere mortals.

EEG Neurofeedback Senior Project
2-channel EEG is an open-source printed circuit board by t3rwin, from the t3rwin/2-channel-EEG repository on GitHub. It is a 4-layer board of 84.1 × 43.9 mm with 92 parts on 82 nets, routed with 538 tracks and 87 vias.
It is built around the PESE1-S5-S5-M-TR, MCP3562R-E/ST and AD8606ARZ. Its parts include 31 resistors, 30 capacitors, 12 ICs, 11 connectors and 1 diode.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C7, C8, C9, C10, C11, C15, C18, C21, C23, C24, C26, C27, C30 |
| 8 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6, C16, C17, C19, C20, C25 |
| 6 | 10 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24, R25, R26, R27, R28, R29 |
| 6 | AD8606 | Package_SO:MSOP-8_3x3mm_P0.65mm | U4, U5, U7, U8, U9, U11 |
| 5 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R21, R30, R31 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16, R17, R22, R23 |
| 4 | 56.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R9, R10 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C28, C29 |
| 2 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18, R19 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14, R15 |
| 2 | 10k | Senior_Project_Footprints:TRIM_35WR10KLFTR | RV1, RV2 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R13 |
| 2 | 3M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 2 | 47n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C14 |
| 2 | AD8237 | Package_SO:MSOP-8_3x3mm_P0.65mm | U2, U3 |
| 2 | Conn_02x01 | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J5, J6 |
| 2 | Matched_10K_Resistor_Array_2x | Senior_Project_Footprints:R_Array_Matched_2x0606 | RN1, RN2 |
| 2 | SolderJumper_2_Open | Resistor_SMD:R_0603_1608Metric | JP1, JP2 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
| 1 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C22 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 510 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | ADC_Data | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J9 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | Electrode_Input | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | GND_select | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J4 |
| 1 | ISO6763-Q1 | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U12 |
| 1 | ISO_IN_C | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J10 |
| 1 | MCP3562R | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U10 |
| 1 | MCU_Data | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J11 |
| 1 | Nucleo_3.3 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | PESE1-S5-S5-M-TR | Senior_Project_Footprints:CONV_PESE1-S5-S5-M | U1 |
| 1 | Power_Input | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | SW_Push_SPDT | Senior_Project_Footprints:SW_JS102011SCQN | SW1 |
| 1 | TCR2EF33 | Senior_Project_Footprints:IC_TC4S584F_LF | U6 |
| 1 | VGND | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J7 |
| 1 | ~ | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |

dojoe/Twonkie
A USB-PD sniffer/injector/sink based on Google's Twinkie, re-designed to be manufactured by mere mortals.

ultimaterobotics/uECG_v4_3_all
uECG - very small wearable ECG device that sends raw and processed data over BLE

ChicoLiebl/pressure-acquisition-system
Pressure acquisition system for a piezoelectric sensor

Adji-SP/Matlab_Dashboard
The Banyu40kWiredSchematic.zip package is schematic-only. No PCB is needed to open it. The old unrouted PCB remains in the workspace as an earlier artifact; the PCB discussion below refers to that earlier version.

AndreSuarez/Bio_MicroMain_PCB-1
Diseño Final para la placa del Bioimpedanciometro



It measures 84.1 × 43.9 mm and has 4 copper layers, 1.6 mm thick.
92 parts, built around the PESE1-S5-S5-M-TR, MCP3562R-E/ST and AD8606ARZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the t3rwin/2-channel-EEG repository on GitHub, at the commit this page was made from: the board is KiCad/2-channel-EEG.kicad_pcb and its schematic KiCad/2-channel-EEG.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask t3rwin before reusing the design.