2 layers100 × 40.5 mm
Pressure acquisition system
ChicoLiebl/pressure-acquisition-system
Pressure acquisition system for a piezoelectric sensor
68 parts1
4 layers100 × 100 mm
All boards
ChicoLiebl/pressure-acquisition-system1Pressure acquisition system for a piezoelectric sensor
- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 154
- Nets
- 89
- Pads
- 564
- Tracks, vias
- 1,011, 380
- Pours
- 20
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 Oct 2021
- Updated
- 25 May 2022
Overview
All boards is an open-source printed circuit board by ChicoLiebl, from the ChicoLiebl/pressure-acquisition-system repository on GitHub. It is a 4-layer board of 100 × 100 mm with 154 parts on 89 nets, routed with 1,011 tracks and 380 vias.
It is built around the CP2102N-A01-GQFN24, AD8606ACBZ-REEL7 and ESP32-WROVER-I, with the HLK-PM01, ADS8689IPW and AMS1117-3.3 among its other parts. Its parts include 60 capacitors, 28 resistors, 12 connectors, 11 ICs and 6 diodes. It belongs with the sensors and measurement boards and the ESP32 boards of this library.
Main components
9
CP2102N-A01-GQFN24
QFN-24-EP(4x4)3Mbps 3V~3.6V Transceiver QFN-24-EP(4x4) USB Converters ROHSSilicon LabsUSB Converters
AD8606ACBZ-REEL7
WLCSP-8(1.4x1.8)-40℃~+125℃ 0.5pA 1.2mA 100dB 10MHz 1pA 2 2.7V~5.5V 300uV 4.5uV/℃ 5V/us 80mA 8nV/√Hz@1kHz Rail-to-Rail Input, Rail-to-Rail Output WLCSP-8(1.4x1.8) Precision Op Amps ROHSAnalog DevicesLow Noise Amplifiers (LNA) - RF
ESP32-WROVER-I
SMD,18x31.4mmSMD,18x31.4mm WiFi Modules ROHSEspressif SystemsWiFi Modules
HLK-PM01
DIP,34x24mm0.1W 100mVp-p 15mm 20mm 34mm 3W 3kV 5V 700mA 73% 85VAC~265VAC AC-DC Short Circuit Protection、Over Current Protection、Fault self-recovery ±0.2% 插件,34x20mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
ADS8689IPW
TSSOP-16-40℃~+125℃ 0.5LSB 1 1.65V~3.3V、4.75V~5.25V 100kHz 10uA 16 2.56V、5.12V、6.144V、10.24V、12.288V 7ppm/℃ 92dB Built-in SAR SPI Support TSSOP-16 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TMUX1102DBV
SOT-23-5-40℃~+125℃ 1 1.08V~5.5V 1.8Ω 17pF 1:1 300MHz SOT-23-5 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
AD8606ARZ
SOIC-8-40℃~+125℃ 0.5pA 1.2mA 100dB 10MHz 1pA 2 2.7V~5.5V 4.5uV/℃ 5V/us 80mA 80uV 8nV/√Hz@1kHz ESD protection、Built-in compensation、Overvoltage protection、Reverse-phase input protection Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Precision Op Amps ROHSAnalog DevicesPrecision Op Amps
MMSS8050-H-TP
SOT-23-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 120 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSMicro Commercial ComponentsBipolar (BJT)
README
README.mdpressure-acquisition-system
Acquisition system for a piezoelectric pressure sensor, model 601A from Kistler. This system was developed as my electrical engineering graduation project.
Parts
154| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 100nF | digikey-footprints:0603 | C2, C13, C13, C17, C17, C19, C19, C21, C21, C22, C22, C23, C25, C25, C26, C26 +6 |
| 12 | 1uF | digikey-footprints:0805 | C2, C2, C6, C6, C11, C11, C14, C14, C20, C20, C24, C24 |
| 9 | 10k | digikey-footprints:0603 | R3, R5, R5, R7, R7, R8, R8, R10, R10 |
| 7 | 560 | digikey-footprints:0603 | R1, R1, R2, R2, R3, R3, R11 |
| 6 | 22uF | digikey-footprints:0805 | C9, C9, C10, C10, C18, C18 |
| 4 | 0.1uF | digikey-footprints:0603 | C1, C1, C23, C24 |
| 4 | 100k | digikey-footprints:0603 | Rb1, Rb1, Rb2, Rb2 |
| 4 | 1k | digikey-footprints:0603 | Ra1, Ra1, Ra2, Ra2 |
| 4 | 47uF | digikey-footprints:1206 | C7, C7, C8, C8 |
| 4 | MMSS8050-H-TP | digikey-footprints:SOT-23-3 | Q1, Q1, Q2, Q2 |
| 4 | R | digikey-footprints:0603 | R1, R2, R12, R13 |
| 3 | 10uF | digikey-footprints:0805 | C1, C12, C12 |
| 2 | 0.1uF | Capacitor_THT:C_Rect_L9.0mm_W3.8mm_P7.50mm_MKT | C4, C4 |
| 2 | 10 mH | comp-lib:UU9.8 | L1, L1 |
| 2 | 12M | digikey-footprints:0603 | Rf1, Rf1 |
| 2 | 220uF | Capacitor_THT:CP_Radial_D10.0mm_P2.50mm | C3, C3 |
| 2 | 220Ω @ 100MHz 2 350mA 300mΩ | comp-lib:ACM3225-2P | L2, L2 |
| 2 | 22k | digikey-footprints:0603 | R6, R6 |
| 2 | 2k | digikey-footprints:0603 | R4, R4 |
| 2 | 3.3n | digikey-footprints:0603 | Cf1, Cf1 |
| 2 | 330pF | digikey-footprints:0603 | C16, C16 |
| 2 | 33R | digikey-footprints:0603 | R11, R11 |
| 2 | 4.7uF | digikey-footprints:0805 | C15, C15 |
| 2 | 47k | digikey-footprints:0603 | R9, R9 |
| 2 | ADS8689IPW | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U2, U2 |
| 2 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1, U1 |
| 2 | CP2102N-A01-GQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U3, U3 |
| 2 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J5, J5 |
| 2 | Conn_Coaxial | comp-lib:BNC_Header | J1, J2 |
| 2 | ESP32-WROVER-I | comp-lib:XCVR_ESP32-WROVER-I | A1, A1 |
| 2 | Encoder | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J4, J4 |
| 2 | Fuse | Fuse:Fuse_BelFuse_0ZRE0025FF_L9.6mm_W3.8mm | F1, F1 |
| 2 | HLK-PM01 | Converter_ACDC:Converter_ACDC_HiLink_HLK-PMxx | PS1, PS1 |
| 2 | LED BLUE | digikey-footprints:0603 | D2, D2 |
| 2 | LED GREEN | digikey-footprints:0603 | D1, D1 |
| 2 | LED RED | digikey-footprints:0603 | D3, D3 |
| 2 | MountingHole_Pad | TestPoint:TestPoint_Plated_Hole_D3.0mm | H1, H2 |
| 2 | TMUX1102D | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U5, U5 |
| 2 | USB_B_Micro | Connector_USB:USB_Micro-AB_Molex_47590-0001 | J3, J3 |
| 2 | Varistor | Varistor:RV_Disc_D12mm_W3.9mm_P7.5mm | RV1, RV1 |
| 2 | repo-qr-code | comp-lib:repo-qr-code | Repositório do Projeto, Repositório do Projeto |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C25 |
| 1 | 127V AC | comp-lib:AC-Input | J1 |
| 1 | AD8606ACBZ-REEL7 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | AD8606ARZ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | Battery_Cell | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | Conn_01x03 | comp-lib:AC-Input | J1 |
| 1 | GX16-5P | comp-lib:GX16-5P | J2 |
| 1 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1 |
| 1 | PC817 | comp-lib:PC817 | U1 |
| 1 | SW_DIP_x01 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | charge-amp-board | comp-lib:GX16-5P | J2 |
More from ChicoLiebl/pressure-acquisition-system
3- 4 layers70 × 55 mm
V2-main board
ChicoLiebl/pressure-acquisition-system
Pressure acquisition system for a piezoelectric sensor
58 parts1 - 4 layers30 × 45 mm
V2-charge amp
ChicoLiebl/pressure-acquisition-system
Pressure acquisition system for a piezoelectric sensor
26 parts1
Similar boards
- 4 layers65.8 × 77.2 mm
- 2 layers263.5 × 63.5 mm
Tobor
evezor/tobor_v00
Tobor (robot spelled backwards), was built to be the most versatile open-source robotics system
124 parts126CERN-OHL-P-2.0 - 2 layers104.3 × 65.1 mm
- 4 layers30.7 × 56.9 mm
ESP32 Clone devkit
futureshocked/KLP3e_ESP32_development_kit
This is the repository for the "ESP32 Devkit clone" project.
36 parts5 - 4 layers31.4 × 57.3 mm
ESP32 Clone Devkit
futureshocked/KLP4e_ESP32-Clone-Devkit
This is the repository for the "ESP32 devikit clone" project.
34 parts5MIT - 2 layers67.1 × 88.4 mm
DE429 001 INSTALL
Purdue-Northwest-Vibration-Anaylsis/Purdue-Northwest-Vibration-Analysis
Vibration analysis senior design project for purdue northwest.
48 parts2 - 4 layers30.4 × 56.5 mm
ESP32-DevKit Custom
chackojose2005-zodiac/ESP32-DevKit-Custom
4-layer ESP32 development board PCB clone based on Espressif ESP32-DevKitC-v4 reference design, made in KiCad
36 partsMIT - 4 layers30.3 × 56.7 mm
Questions
How big is the All boards PCB?
It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the All boards use?
154 parts, built around the CP2102N-A01-GQFN24, AD8606ACBZ-REEL7, ESP32-WROVER-I and HLK-PM01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the All boards KiCad files?
From the ChicoLiebl/pressure-acquisition-system repository on GitHub, at the commit this page was made from: the board is Hardware/REV00/All_boards.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the All boards design in my own project?
Its repository states no licence, so its author keeps all rights: ask ChicoLiebl before reusing the design.