Skip to the content
2 layers263.5 × 63.5 mmTobor, the printed circuit board in 3D

Tobor (robot spelled backwards), was built to be the most versatile open-source robotics system

Size
263.5 × 63.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
124
Nets
136
Pads
606
Tracks, vias
1,332, 793
Pours
5
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
14 Oct 2024
Updated
23 Mar 2025

Overview

Tobor is an open-source printed circuit board by evezor, from the evezor/tobor_v00 repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 263.5 × 63.5 mm with 124 parts on 136 nets, routed with 1,332 tracks and 793 vias.

It is built around the ESP32-WROOM-32U, ESP32-WROVER-I and XL1509-3.3, with the AMS1117-3.3 and SK6812MINI-E among its other parts. Its parts include 46 capacitors, 27 resistors, 15 connectors, 12 diodes and 7 ICs. It belongs with the robots and motor control boards and the ESP32 boards of this library.

Main components

5

README

README.md

tobor_v00

Tobor (robot spelled backwards), was built to be the most versatile open-source robotics system

Find out more about this project, additional source files will be released here

board_view front_view back copper

Tobor Robot Arm Features

  • ESP32 microcontroller with 4 MB SPIRAM
    • Runs Micropython
  • 3 DRV8825 stepper motor drivers
  • 2 AS5048B 14-bit absolute encoders
    • Allows for low/no motion homing
    • Collaborative programming
  • 8 position addressable LED ring
    • Can be used to display states of motors or the machine
  • External stepper driver and peripheral port
  • CNC controller powered by Fluid NC with dedicated FTDI and reset switch
  • Micro-SD card slot
  • WiFi enabled
  • CANbus Edge Board Interface
  • Servo header
  • 24 VDC power input
  • 1 user programmable tactile button
  • Reset button
  • FTDI port
  • Edgeboard standards
    • Heartbeat LED
    • Function button
    • Status addressable LED

Find out more about this project, additional source files will be released here

Parts

124
QtyValueFootprintReferences
1410kResistor_SMD:R_0603_1608MetricR101, R103, R104, R107, R108, R109, R111, R112, R202, R203, R302, R303, R402, R403
12.1uFCapacitor_SMD:C_0603_1608MetricC104, C105, C106, C107, C108, C109, C110, C111, C120, C122, C123, C125
9.1uF 100VCapacitor_SMD:C_0805_2012MetricC204, C205, C207, C303, C306, C307, C403, C406, C407
922uFCapacitor_SMD:C_0805_2012MetricC101, C102, C103, C114, C116, C117, C119, C121, C124
9SK6812MINILED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mmD101, D102, D103, D104, D105, D106, D107, D108, D112
60.1RResistor_SMD:R_0805_2012MetricR204, R205, R304, R305, R404, R405
54.7uF 50VCapacitor_SMD:C_0805_2012MetricC113, C118, C203, C305, C405
4SW_PushButton_Switch_SMD:SWITCH_2x3_SMD_TACTILE_GREENSW101, SW102, SW103, SW104
30.47uFCapacitor_SMD:C_0603_1608MetricC206, C302, C402
31.5kResistor_SMD:R_0603_1608MetricR201, R301, R401
310 nFCapacitor_SMD:C_0603_1608MetricC202, C301, C401
310k POTPotentiometer_SMD:Potentiometer_Bourns_TC33X_VerticalRV201, RV301, RV401
34.7kResistor_SMD:R_0603_1608MetricR102, R105, R106
347uFCapacitor_SMD:CP_Elec_6.3x7.7C201, C304, C404
3Conn_01x04_MountingPinConnector_JST:JST_PH_B4B-PH-SM4-TB_1x04-1MP_P2.00mm_VerticalJ201, J301, J401
3DRV8825PWPRPackage_SO:HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.4x9.5mm_ThermalViasU201, U301, U401
3TestPointTestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mmTP201, TP301, TP401
2220uFCapacitor_SMD:CP_Elec_10x10.5C112, C115
2Conn_01x04_MountingPinConnector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_HorizontalJ107, J109
2SolderJumper_2_BridgedJumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mmJP101, JP102
2ftdi_connConnector_JST:JST_SH_BM06B-SRSS-TB_1x06-1MP_P1.00mm_VerticalJ101, J112
1120RResistor_SMD:R_1206_3216MetricR110
168uFInductor_SMD:INDUCTOR-68uHL101
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U103
1Conn_01x02Connector_Phoenix_MC:PhoenixContact_MCV_1,5_4-GF-3.81_1x04_P3.81mm_Vertical_ThreadedFlange_MountHoleJ103
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJ104
1Conn_01x03Connector_JST:JST_PH_B3B-PH-SM4-TB_1x03-1MP_P2.00mm_VerticalJ102
1Conn_01x03Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_HorizontalJ106
1Conn_01x04Connector_JST:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_HorizontalJ111
1Conn_02x05_Odd_EvenConnector_IDC:IDC-Header_2x05_P2.54mm_VerticalJ108
1D_TVS_x2_AACPackage_TO_SOT_SMD:SOT-23D110
1ESP32-WROOM-32URF_Module:ESP32-WROOM-32U_evezorU101
1ESP32-WROVER-IRF_Module:XCVR_ESP32-WROVER-IA101
1LOGOSymbol:evezor_18G***
1LOGOSymbol:EVEZOR_GEARG***
1Micro_SD_Card_DetConnector_Card:Conn_uSDcardJ110
1SX35_SCHOTTKYDiode_SMD:D_SMAD109
1Trans_CAN_SN65HVD230DRPackage_SO:CAN-TRANS-SN65HVD230DRU104
1XL1509Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU102
1can_jumperJumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mmJP103
1fanConnector_JST:JST_XH_2_VERTICALJ105
1led_gLED_SMD:LED_0603_1608MetricD111

More from evezor/tobor_v00

1
  • 4 layers250.2 × 63.3 mmArm v3, the printed circuit board in 3D

    Arm v3

    evezor/tobor_v00

    Tobor (robot spelled backwards), was built to be the most versatile open-source robotics system

    123 parts126CERN-OHL-P-2.0

Similar boards

  • 4 layers89.6 × 90 mmPs1 lockers, the printed circuit board in 3D

    Ps1 lockers

    pumpingstationone/ps1_lockers

    web server to run lockers system

    76 partsMIT
  • 4 layers65.8 × 77.2 mmVtx scanner pcb, the printed circuit board in 3D

    Vtx scanner pcb

    deets/deets-fpv-vtx-scanner

    39 parts5
  • 4 layers100 × 100 mmAll boards, the printed circuit board in 3D

    All boards

    ChicoLiebl/pressure-acquisition-system

    Pressure acquisition system for a piezoelectric sensor

    154 parts1
  • 2 layers104.3 × 65.1 mmTes0, the printed circuit board in 3D

    Tes0

    mekatronik-achmadi/wahyu-job

    This example test toolkit for various RF module.

    56 parts
  • 2 layers45.1 × 45.1 mmSuperPower uC KiCad, the printed circuit board in 3D

    SuperPower uC KiCad

    SuperPower/esp32_shield

    All hardware designs and products you can find in this repository is licensed under CERN Open Hardware Licence Version 2 - Weakly Reciprocal

    33 parts
  • 2 layers155 × 60 mmEsplay, the printed circuit board in 3D

    Esplay

    andykarpov/karabas-esplay

    A custom PCB with 3.2" TFT screen for the ESPlay project

    123 parts1
  • 4 layers26.5 × 57.4 mmMotorDriver, the printed circuit board in 3D

    MotorDriver

    Kmshanley/MiniRobots

    Firmware and PCB desgin for mini robots with UWB localization and lidar mapping

    50 parts1
  • 2 layersStreamBoy, the printed circuit board in 3D

    StreamBoy

    possan/gb-cart

    References: ESP32 DEVKIT V4 Schematic CMOD S6 Schematic ESP32 SD Card ESP32 PMOD

    94 parts

Questions

How big is the Tobor PCB?

It measures 263.5 × 63.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tobor use?

124 parts, built around the ESP32-WROOM-32U, ESP32-WROVER-I, XL1509-3.3 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tobor KiCad files?

From the evezor/tobor_v00 repository on GitHub, at the commit this page was made from: the board is cad/v0/tobor.kicad_pcb and its schematic cad/v0/PHI_STEPPER.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tobor design in my own project?

Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).