

StreamBoy
References: ESP32 DEVKIT V4 Schematic CMOD S6 Schematic ESP32 SD Card ESP32 PMOD
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 94
- Nets
- 202
- Pads
- 585
- Tracks, vias
- 757, 46
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Dec 2019
- Updated
- 4 Jan 2020
Overview
StreamBoy is an open-source printed circuit board by possan, from the possan/gb-cart repository on GitHub. It is a 2-layer board with 94 parts on 202 nets, routed with 757 tracks and 46 vias.
It is built around the CP2102N-A01-GQFN28R, ESP32-WROVER-I and TPS62170DSG, with the LY68L6400SLIT, 0.1UF 50V 5*11 and SS8050-G among its other parts. Its parts include 33 capacitors, 23 resistors, 12 ICs, 6 diodes and 2 transistors. It belongs with the ESP32 and FPGA and CPLD boards of this library.
Main components
6CP2102N-A01-GQFN28R
QFN-28-EP(5x5)-40℃~+85℃ 13.7mA 195uA 3Mbps 3V~3.6V Transceiver USB 2.0 QFN-28-EP(5x5) USB Converters ROHSSilicon LabsUSB ConvertersESP32-WROVER-I
SMD,18x31.4mmSMD,18x31.4mm WiFi Modules ROHSEspressif SystemsWiFi ModulesTPS62170DSG
WSON-8-EP(2x2)-40℃~+85℃@(TA) 1 17uA 2.25MHz 3V~17V 500mA 900mV~6V Adjustable Buck Buck Built-in Yes WSON-8-EP(2x2) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLY68L6400SLIT
SOP-8SRAMLyontek Inc.0.1UF 50V 5*11
插件,5x11mm1000hrs@105℃ 100nF 11mm 1A@100kHz 2mm 50V 5mm 插件,5x11mm Aluminum Electrolytic Capacitors - Leaded ROHSCXAluminum Electrolytic Capacitors - LeadedSS8050-G
SOT-231 NPN 1.5A 100 100MHz 100nA 25V 300mW 400mV 5V NPN SOT-23 Bipolar (BJT) ROHSComchipBipolar (BJT)
README
README.mdVarious gameboy cart projects
References:
Parts
94| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C11, C14, C17, C18, C20, C21, C22, C24, C26, C29 |
| 7 | LSF0204PWR | LSF0204PWR:SOP65P640X120-14N | U3, U4, U5, U6, U7, U8, U9 |
| 6 | 0.47uF | Capacitor_SMD:C_0402_1005Metric | C12, C13, C16, C19, C25, C28 |
| 6 | 4.7KOhm | Resistor_SMD:R_0805_2012Metric | R13, R14, R15, R17, R18, R19 |
| 6 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JDAC1, JFPGAI2C1, JPOWER1V2, JPOWER3V1, JPOWER5V1, JRESET1 |
| 5 | 4.7KOhm | Resistor_SMD:R_0402_1005Metric | R5, R8, R20, R21, R22 |
| 4 | 100uF | Capacitor_SMD:C_1206_3216Metric | C15, C23, C27, C30 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric | R9, R10, R12, R42 |
| 4 | LED | LED_SMD:LED_1210_3225Metric | D3, D4, D5, D6 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C8, C10 |
| 2 | 0.1uF/50V | Capacitor_SMD:C_0805_2012Metric | C31, C33 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric | C4, C5 |
| 2 | 2.2uH | Inductor_SMD:L_0805_2012Metric | L1, L2 |
| 2 | 22uF | Capacitor_SMD:C_0603_1608Metric | C3, C6 |
| 2 | 75K | Resistor_SMD:R_0402_1005Metric | R1, R4 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | JFPGASPI1, JTAG_ESP1 |
| 2 | D | Diode_SMD:D_SOD-123F | D1, D2 |
| 2 | SS8050-G | SS8050-G:SOT95P240X115-3N | Q1, Q2 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW_B1, SW_B2 |
| 2 | TPS62170DSG | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalVias | U10, U11 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 100KOhm | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 150K | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 15pF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 22uF/10V | Capacitor_SMD:C_0805_2012Metric | C32 |
| 1 | 24K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 2K | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 330Ohm | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | CP2102N-A01-GQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U12 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | JUART1 |
| 1 | ESP32-WROVER-I | ESP32-WROVER-I:XCVR_ESP32-WROVER-I | A1 |
| 1 | GB-CART | gb_cart_fingers:GB_CART_FINGERS | J1 |
| 1 | LY68L6400SLIT | LY68L6400SLIT:SOIC127P600X175-8N | IC1 |
| 1 | Micro_SD_Card | TF-015:TF015 | JSD1 |
| 1 | SG-7050CBN | Oscillator:Oscillator_SMD_SeikoEpson_SG8002CA-4Pin_7.0x5.0mm | X1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex_47346-0001 | JUSB1 |
| 1 | XC6SLX9-TQG144 | Package_QFP:TQFP-144_20x20mm_P0.5mm | U1 |
Similar boards
- 2 layers

- 4 layers39.4 × 39.4 mm

- 4 layers36 × 36 mm

- 4 layers75 × 71 mm

- 2 layers39.6 × 99.1 mm

ESP32-Eurorack Audio
ctag-fh-kiel/ctag-tbd
CTAG TBD >>to be determined<< an extendible open source Eurorack sound module
128 parts260 - 2 layers28.5 × 53.6 mm

- 2 layers

GCAN gauge
willemcvu/gCAN-gauge
An open-source ESP32-based programmable digital gauge targeted at EV conversions
49 parts4MIT - 2 layers70.6 × 66.3 mm

Prototype Rev-
DiegoBriceno03/Portable-Biofeedback
Portable Biofeedback device for anxiety management
106 parts3
Questions
What parts does the StreamBoy use?
94 parts, built around the CP2102N-A01-GQFN28R, ESP32-WROVER-I, TPS62170DSG and LY68L6400SLIT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the StreamBoy KiCad files?
From the possan/gb-cart repository on GitHub, at the commit this page was made from: the board is StreamBoy_v0.1/StreamBoy.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the StreamBoy design in my own project?
Its repository states no licence, so its author keeps all rights: ask possan before reusing the design.