Skip to the content
2 layers100 × 100 mmTaps Macropad V3, the printed circuit board in 3D

A Macropad With 16 Keys And 2 Rotatory Encoders!

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
44
Nets
43
Pads
183
Tracks, vias
195, 17
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
13 Mar 2026
Updated
21 May 2026

Overview

Taps Macropad V3 is an open-source printed circuit board by sudo-apt-install-tap, from the sudo-apt-install-tap/Taps-Macropad-V3 repository on GitHub. It is a 2-layer board of 100 × 100 mm with 44 parts on 43 nets, routed with 195 tracks and 17 vias.

It is built around the RP2040-ZERO. Its parts include 18 diodes, 18 switches and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.

Main components

1

README

README.md
Assembled-removebg-preview

Taps Macropad V3

A 16 Key + 2 Rotatory Encoder Macropad!

Overview

A Macropad With 16 Keys And 2 Rotatory Encoders!

Why?

I wanted a macropad better than my current one!.

How?

Use the firmware in FIRMWARE . I've used circuitpy and kmk to do it!

CAD

CAD files are available at CAD

Images

Assembled


Full render


PCB


PCB


Schematic
Sch
pcb 3d
3D Viewer

Build Images:


Full Assembly

Back Side Of PCB

Bodged Art Of Hardware

Demo Video Hosted On YouTube

Demo #003 V3

BOM

NamePurposeCost (USD)QtyTotal (USD)LinkDistributor
Rotatory EncodersRotatory Encoders$0.002$0.00-Self sourced
RP2040 ZeroMCU$0.001$0.00-SelfSourced
Keys and DiodesDiodes and keys$11.001$11.00-Stackskb
PCBPCB$13.001$13.00-JLC

Parts

44
QtyValueFootprintReferences
18DDiode_SMD:D_SOD-123D1, D2, D3, D4, D5, D6, D7, D10, D11, D12, D13, D14, D15, D16, D17, D18 +2
16SW_PushTaps Keyboard shit:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16
3TestPoint_Pad_4.0x4.0mmTestPoint:TestPoint_Pad_4.0x4.0mm3V3, 5V5, GND
2RotaryEncoder_SwitchRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW17, SW18
1RP2040-ZeroRP2040 Zero:RP2040 ZeroU1

The 40 most common of 44 parts.

Similar boards

  • 2 layers132.3 × 94.9 mmCheapino, the printed circuit board in 3D

    Cheapino

    tompi/cheapino

    An affordable split 36 keys keyboard

    59 parts1.2kCC-BY-4.0
  • 2 layers321 × 92.3 mmMx40, the printed circuit board in 3D

    Mx40

    zzeneg/stront

    Split keyboards with 38 or 40 keys, LCD display and Cirque trackpad

    181 parts353MIT
  • 2 layers255.9 × 99.3 mmZerosprey42, the printed circuit board in 3D

    Zerosprey42

    beekeeb/zerosprey42

    Zerosprey42 Keyboard is a wired, beginner friendly, choc hotswap, MonoBlockSplit (Unibody), column-staggered, DIY mechanical keyboard.

    96 parts140
  • 2 layers146.3 × 69.5 mmStress, the printed circuit board in 3D

    Stress

    GroooveBob/Stress

    Pocket Arcade Fight Pad

    22 parts102MIT
  • 2 layers54 × 64 mmDonConIOmini, the printed circuit board in 3D

    DonConIOmini

    ravinrabbid/DonCon2040

    RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers

    96 parts66MIT
  • 2 layers52 × 50 mmRP2040-TestPatternGenerator VGA, the printed circuit board in 3D

    RP2040-TestPatternGenerator VGA

    nmur/RP2040-TestPatternGenerator

    A simple test pattern generator running on the RP2040 microcontroller

    12 parts64GPL-3.0
  • 2 layers120 × 40 mmBuinchiez40, the printed circuit board in 3D

    Buinchiez40

    ChrisChrisLoLo/bunchiez40

    A pocket keyboard that makes use of mouse switches to achieve a miniscule size

    90 parts56GPL-3.0
  • 2 layers305.2 × 76.2 mmSoroka, the printed circuit board in 3D

    Soroka

    kapee1/soroka

    40% DIY-keyboard with base kit support

    126 parts47Unlicense

Questions

How big is the Taps Macropad V3 PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Taps Macropad V3 use?

44 parts, built around the RP2040-ZERO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Taps Macropad V3 KiCad files?

From the sudo-apt-install-tap/Taps-Macropad-V3 repository on GitHub, at the commit this page was made from: the board is PCB/PCB.kicad_pcb and its schematic PCB/PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Taps Macropad V3 design in my own project?

Its repository states no licence, so its author keeps all rights: ask sudo-apt-install-tap before reusing the design.