2 layers78 × 72 mm
4 layers105.4 × 58.9 mm
DAQ Board
sparkerBCI/FYP1Brain Computer Interface 3-D Printed Prosthetic Hand
- Size
- 105.4 × 58.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 145
- Nets
- 116
- Pads
- 449
- Tracks, vias
- 695, 304
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Jul 2019
- Updated
- 5 Jul 2020
Overview
DAQ Board is an open-source printed circuit board by sparkerBCI, from the sparkerBCI/FYP repository on GitHub. It is a 4-layer board of 105.4 × 58.9 mm with 145 parts on 116 nets, routed with 695 tracks and 304 vias.
It is built around the ATMEGA328P-AU, FT232RL and TXS0108EPWR, with the LTST-C191KGKT, LTST-C194TBKT and 025101.5MAT1L among its other parts. Its parts include 65 capacitors, 26 resistors, 19 connectors, 9 switches and 7 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
10
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
FT232RL
SSOP-28-208mil-40℃~+85℃ 3.3V~5.25V、4V~5.25V USB 2.0 USB to UART SSOP-28-208mil USB Converters ROHSFTDIUSB Converters
TXS0108EPWR
UncategorisedUnknown maker
LTST-C191KGKT
0603-55℃~+85℃ 130° 20mA 2V 35mcd 567.5nm~576.5nm 574nm 75mW Discrete Diode Water Clear Yellow Green 0603 LED Indication - Discrete ROHSLite-OnLED Indication - DiscreteLTST-C194TBKT
0603-20℃~+80℃ 104mcd 130° 20mA 3.3V 460nm~475nm 468nm 76mW Blue Discrete Diode Water Clear 0603 LED Indication - Discrete ROHSLite-OnLED Indication - Discrete025101.5MAT1L
插件,D2.8xL7.1mmDisposable FusesLittelfuse
B130-13-F(MS)
SMASchottky DiodesMSKSEMI
DMP2100U
SOT-23-55℃~+150℃ 1 P-Channel 1.4V 20V 216pF 24pF 4.3A 75mΩ@2.5V 800mW 9.1nC@4.5V 90pF P-Channel SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsLTST-C191KRKT
0603-55℃~+85℃ 130° 20mA 2V 54mcd 631nm 639nm 75mW Discrete Diode Red Water Clear 0603 LED Indication - Discrete ROHSLite-OnLED Indication - Discrete
MF-MSMF050-2
1812-40℃~+85℃ 100A 150mΩ 15V 1A 1Ω 3.2mm 5.4mm 500mA 1812 Resettable Fuses ROHSBournsResettable Fuses
README
README.mdBrain Computer Interface Controlled, 3-D Printed Prosthetic Hand
This is an Electrical Engineering Final Year Project by Samuel Parker, from the University of Newcastle.
Scope
The project will attempt to conduct a real time frequency analysis of on-line EEG data. The frequency content will then be classified into "Hand Open" or "Hand Closed" using an appropriate classification algorithm. Once classified, the state will be used to control the servos in the 3D printed prosthetic hand. The goal of the project is to achieve realtime, neurally controlled grasping.
Parts
145| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | Capacitor_SMD:C_0603_1608Metric | C22, C29, C32, C37, C40, C46, C50, C53, C54, C56, C59, C60 |
| 11 | 10uF | Capacitor_SMD:C_0603_1608Metric | C13, C27, C30, C39, C41, C43, C45, C51, C55, C61, C62 |
| 9 | 1uF | Capacitor_SMD:C_0603_1608Metric | C9, C10, C14, C17, C18, C19, C21, C23, C25 |
| 9 | 220k | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6, R7, R8, R9, R10, R11 |
| 9 | Conn_01x01_Male | Sparker:DIN 42802-1 | J1, J3, J8, J9, J11, J13, J17, J18, J19 |
| 9 | SW_SPDT | Switches:SPDT-THT_Slide | SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11 |
| 8 | 10nF | Capacitor_SMD:C_0603_1608Metric | C31, C33, C35, C38, C47, C49, C57, C58 |
| 8 | 24nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8 |
| 5 | 100 | Resistor_SMD:R_0603_1608Metric | R22, R23, R24, R25, R26 |
| 5 | 100uF | Capacitor_SMD:C_1206_3216Metric | C16, C26, C28, C42, C44 |
| 5 | 33k | Resistor_SMD:R_0603_1608Metric | R12, R13, R14, R15, R19 |
| 4 | 1K | Resistor_SMD:R_0603_1608Metric | R16, R17, R18, R21 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | MH1, MH2, MH3, MH4 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C12, C15, C20 |
| 3 | 1nF | Capacitor_SMD:C_0603_1608Metric | C34, C36, C48 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R27, R28 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C63, C66 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric | C64, C65 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C24, C52 |
| 2 | LTST-C191KGKT | LED_SMD:LED_0603_1608Metric | D5, D9 |
| 2 | LTST-C194TBKT | LED_SMD:LED_0603_1608Metric | D4, D6 |
| 2 | MCP1755T-5002E_SOT223-5 | Package_TO_SOT_SMD:SOT-223-6 | U2, U4 |
| 1 | 025101.5MAT1L | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | F1 |
| 1 | 16MHz | Resonators:CSTNE16M0V53Z000R0 | Y1 |
| 1 | 2K | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 7.5V | Diode_SMD:D_SMA | D3 |
| 1 | ADS1299-8 | Package_QFP:TQFP-64_10x10mm_P0.5mm | ADC1 |
| 1 | ATmega328P-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | B130-13-F | Diode_SMD:D_SMA | D7 |
| 1 | DC Barrel Jack | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J4 |
| 1 | DMP2100U | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | DRDY_TP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J16 |
| 1 | FT232RL | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U5 |
| 1 | HC-05 BT Module | Resonators:HC-05 | J5 |
| 1 | ICSP Header | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J6 |
| 1 | LM3480-3.3 | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | LTST-C191KRKT | LED_SMD:LED_0603_1608Metric | D8 |
| 1 | MF-MSMF050-2 | Fuse:Fuse_1812_4532Metric | F2 |
| 1 | START_TP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J12 |
| 1 | SparkerLogo | Sparker:NASA | LOGO2 |
| 1 | TE-1825910-6 | Switches:1825910-6 | PB1 |
| 1 | TXS0108EPWR | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U6 |
| 1 | USB_B_Mini | Connector_USB:USB_Micro-B_Wuerth_629105150521 | J2 |
| 1 | UoNLogo | Sparker:UoN | LOGO1 |
| 1 | VCAP1_TP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J15 |
| 1 | VIN_RAW_TP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | VREFP_TP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J14 |
| 1 | VersionLogo | Sparker:Block2 | LOGO3 |
| 1 | ~CS~_TP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
More from sparkerBCI/FYP
5- 4 layers53.9 × 62.3 mm
Classification and Contol Board
sparkerBCI/FYP
Brain Computer Interface 3-D Printed Prosthetic Hand
94 parts1 - 2 layers50 × 42.7 mm
- 2 layers109.2 × 66.3 mm
- 2 layers27.6 × 67.3 mm
Similar boards
- 4 layers115 × 130 mm
Fantoccia carrier
adamjvr/fantoccia
An Open Source DAQ hardare system based on https://github.com/marionette-daq/marionette-hardware
29 parts - 4 layers130 × 90 mm
- 2 layers120 × 120 mm
- 2 layers40 × 20 mm
B BMI088-BRK R1.0
Boardoza/Boardoza_BMI088_6-Axis_IMU_Breakout_Board
High-performance 6-axis IMU breakout board with Bosch BMI088 accelerometer and gyroscope supporting SPI and I²C communication.
18 partsCC-BY-SA-4.0 - 4 layers27 × 27 mm
O32controller
qwertpas/O32controller
Miniature closed-loop controller for brushless DC motors
126 parts37MIT - 4 layers80.5 × 50 mm
- 2 layers184 × 94 mm
FIC Board
DanielRHoefer/satoshi-emblem
Toyota backlit grill emblem with sequential LEDs for 3rd gen 4runner
193 parts1 - 4 layers40 × 60 mm
Trinketcore
alph4345/test
TrinketCore puts everything a small rechargeable gadget needs on one 40 × 60 mm board, ready to order assembled from PCBWay:
113 parts
Questions
How big is the DAQ Board PCB?
It measures 105.4 × 58.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the DAQ Board use?
145 parts, built around the ATMEGA328P-AU, FT232RL, TXS0108EPWR and LTST-C191KGKT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DAQ Board KiCad files?
From the sparkerBCI/FYP repository on GitHub, at the commit this page was made from: the board is Hardware/Electronics/Data Acquisition Board/DAQ Board/DAQ Board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DAQ Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask sparkerBCI before reusing the design.