4 layers105.4 × 58.9 mm
4 layers115 × 130 mm
Fantoccia carrier
adamjvr/fantocciaAn Open Source DAQ hardare system based on https://github.com/marionette-daq/marionette-hardware
- Size
- 115 × 130 mm
- Copper layers
- 4
- Thickness
- 1.57 mm
- Parts
- 29
- Nets
- 179
- Pads
- 318
- Tracks, vias
- 297, 17
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 21 Mar 2024
- Updated
- 2 Apr 2024
Overview
Fantoccia carrier is an open-source printed circuit board by adamjvr, from the adamjvr/fantoccia repository on GitHub. It is a 4-layer board of 115 × 130 mm with 29 parts on 179 nets, routed with 297 tracks and 17 vias.
It is built around the TXS0108EPWR, CGA3E2X7R1H104K080AA and LTST-C194TBKT, with the HZ0805E601R-10 and BU2450SM-JJ-GTR among its other parts. Its parts include 8 capacitors, 7 connectors, 4 resistors, 4 ICs and 4 diodes.
Main components
5
TXS0108EPWR
UncategorisedUnknown maker
CGA3E2X7R1H104K080AA
0603100nF 50V X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSTDKMultilayer Ceramic Capacitors MLCC - SMD/SMT
LTST-C194TBKT
0603-20℃~+80℃ 104mcd 130° 20mA 3.3V 460nm~475nm 468nm 76mW Blue Discrete Diode Water Clear 0603 LED Indication - Discrete ROHSLite-OnLED Indication - Discrete
HZ0805E601R-10
0805-40℃~+125℃ 1 300mΩ 500mA 600Ω@100MHz 0805 Ferrite Beads ROHSLairdFerrite BeadsBU2450SM-JJ-GTR
--40℃~+315℃ - Button And Strip Battery Connector ROHSMPDButton And Strip Battery Connector
README
README.mdfantoccia
An Open Source DAQ hardare system based on https://github.com/marionette-daq/marionette-hardware
Quick Specs:
- STM32 ARM Cortex M7/M4 Dual Core MCU
- Lattice FPGA + open Tool Chain
- Automated Signal Muxing between MCU and FPGA
- USB C Interface
- Pheonix Contact Screw Terminal Interface + 2.54mm Headers
- Compatible with As man Open DAQ software systems as possible
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | CGA3E2X7R1H104K080AA | AVR-KiCAD-Lib-Capacitors:C0603 | C1, C2, C3, C4, C5, C6, C7, C8 |
| 6 | 1881545 | AVR-KiCAD-Lib-Connectors:PHOENIX_1881545 | J2, J3, J4, J5, J6, J7 |
| 4 | LTST-C194TBKT | AVR-KiCAD-Lib-Diodes:LED0603 | D1, D2, D3, D4 |
| 4 | RC0603FR-072K2L | AVR-KiCAD-Lib-Resistors:R0603 | R1, R2, R3, R4 |
| 3 | TXS0108EPWR | AVR-KiCAD-Lib-ICs:SOP65P640X120-20N | U2, U3, U4 |
| 2 | HZ0805E601R-10 | AVR-KiCAD-Lib-Inductors:HZ0805E601R-10 | L1, L2 |
| 1 | BU2450SM-JJ-GTR | AVR-KiCAD-Lib-Battery-Holders:BU2450SM-JJ-GTR | J1 |
| 1 | NUCLEO144-H743ZI | Module:ST_Morpho_Connector_144_STLink | U1 |
Similar boards
- 2 layers56 × 56 mm
Pps watch
idlehandsdev/pps-watch
An extremely accurate watch that doesn't tell time.
39 parts42AGPL-3.0 - 2 layers105 × 90 mm
Low Power Desktop Weather Station
jobitjoseph/Desktop-Weather-Station
This project offers a practical way to build a clean and minimal weather station using an ESP32 microcontroller and an E-Ink display.
65 parts4 - 4 layers140 × 100 mm
Recline actuator controller
Accessibilita/recline-controls
Hardware project for open source wheel chair recline control electronics
181 partsCERN-OHL-S-2.0 - 4 layers61 × 22.9 mm
Finch Feather
adamjvr/DarkLeaf
Adafruit Feather style board for the STM32WB5MMGH6TR 2G RF Module
33 partsCERN-OHL-S-2.0 - 4 layers220 × 130 mm
Gantry controller prototype DUE
kitspace-forks/growbox-open-motion-mobo
A general purpose open source Arduino DUE based motion controller designed to run the Synthetos G2 motion control fimware
138 parts - 2 layers54.2 × 81.5 mm
- 4 layers90 × 49.5 mm
Questions
How big is the Fantoccia carrier PCB?
It measures 115 × 130 mm and has 4 copper layers, 1.57 mm thick.
What parts does the Fantoccia carrier use?
29 parts, built around the TXS0108EPWR, CGA3E2X7R1H104K080AA, LTST-C194TBKT and HZ0805E601R-10. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fantoccia carrier KiCad files?
From the adamjvr/fantoccia repository on GitHub, at the commit this page was made from: the board is PCB/fantoccia_carrier/fantoccia_carrier.kicad_pcb and its schematic PCB/fantoccia_carrier/5VDC_Translator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fantoccia carrier design in my own project?
Its repository states no licence, so its author keeps all rights: ask adamjvr before reusing the design.