

Low Power Desktop Weather Station
This project offers a practical way to build a clean and minimal weather station using an ESP32 microcontroller and an E-Ink display.
- Size
- 105 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 75
- Pads
- 247
- Tracks, vias
- 401, 27
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 28 Mar 2025
- Updated
- 10 Apr 2025
Overview
Low Power Desktop Weather Station is an open-source printed circuit board by jobitjoseph, from the jobitjoseph/Desktop-Weather-Station repository on GitHub. It is a 2-layer board of 105 × 90 mm with 65 parts on 75 nets, routed with 401 tracks and 27 vias.
It is built around the ESP32-S3-WROOM-1-N8, HPP845E031R4 and AO3401A, with the ADP124ACPZ-3.3-R7, SS2040FL and SS14 among its other parts. Its parts include 18 capacitors, 16 resistors, 8 ICs, 7 diodes and 3 connectors. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
Main components
10ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesHPP845E031R4
DFN-6(3x3)-40℃~+125℃ 0%RH~100%RH 1.5V~3.6V 14uA DFN-6(3x3) Temperature and Humidity Sensor ROHSTE ConnectivityTemperature And Humidity SensorAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsADP124ACPZ-3.3-R7
LFCSP-8(2x2)-40℃~+125℃ 1 105uA 3.3V 5.5V 500mA 55uVrms 60dB@(100kHz) Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive LFCSP-8(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSS2040FL
SOD-123FLSOD-123FL Schottky Diodes ROHSFUXINSEMISchottky DiodesSS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesB2B-PH-SM4-TB(LF)(SN)
SMD,P=2mm-25℃~+85℃ 1 100V 1x2P 2 2A 2P 2mm 6.6mm 7.95mm 7mm Auxiliary Solder Pin Beige Copper alloy PA PH Surface Mount,Vertical Tin UL94V-0 SMD,P=2mm Wire To Board Connector ROHSJSTWire To Board ConnectorBU2450SM-JJ-GTR
--40℃~+315℃ - Button And Strip Battery Connector ROHSMPDButton And Strip Battery ConnectorF34G-1A7Q1-E8C24
-UncategorisedAmphenolRTF025N03TL
TUMT-3-55℃~+150℃ 1 N-channel 1.5V 2.5A 270pF 3.7nC@4.5V 30V 40pF 67mΩ@4.5V 70pF 800mW N-Channel TUMT-3 MOSFETs ROHSROHM SemiconductorMOSFETs
README
README.mdDesktop-Weather-Station

In today’s fast-paced world, many of us spend long hours indoors—whether working from home, studying, or just managing our daily routines. Natural cues like changing skies, outdoor temperatures, or the feel of humidity are often lost behind four walls and closed windows. This can make it difficult to stay aware of what’s happening outside, especially when our focus is tied to digital devices. Having a dedicated, always-visible weather display on your desk adds a subtle but meaningful connection to the outside world. It’s a small touch that can help with planning your day, knowing when to grab a jacket before stepping out, or simply enjoying the gentle reminder that time and weather continue to change beyond the screen.
This project offers a practical way to build a clean and minimal weather station using an ESP32 microcontroller and an E-Ink display. The use of E-Ink ensures that the display remains readable even without constant power, making it a perfect fit for battery-powered desktop use. Once connected to Wi-Fi, the station fetches real-time weather data such as temperature, humidity, and current conditions using the OpenWeatherMap API. It also monitors indoor temperature and humidity with the help of a built-in sensor and adds to the data displayed on the screen. The device automatically updates itself at fixed intervals and enters deep sleep to conserve energy. Once assembled, it becomes a quiet and elegant companion on your desk—keeping you informed, without the distractions of a smartphone or computer screen.
The firmware part of this project builds upon the excellent work of David Bird. The code has been adapted from his original implementation.
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 4.7uF/25V | Capacitor_SMD:C_0603_1608Metric | C8, C10, C11, C13, C14, C15, C16, C17 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C6, C7, C9, C18 |
| 4 | 100K | Resistor_SMD:R_0603_1608Metric | R3, R5, R7, R8 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R13 |
| 4 | MountingHole | MountingHole:MountingHole_2.5mm_Pad | H1, H2, H3, H4 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C5 |
| 3 | AO3401A | Package_TO_SOT_SMD:SOT-23 | U1, U2, U5 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 3 | SS2040FL | SS2040FL_R1_00001:SODFL3618X110N | D2, D3, D4 |
| 2 | 33R | Resistor_SMD:R_0603_1608Metric | R14, R15 |
| 2 | 5K1 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | SS14 | Diode_SMD:D_SMA | D1, D7 |
| 1 | 0.47R | Resistor_SMD:R_0805_2012Metric | R17 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 10uH | Inductor_SMD:L_Taiyo-Yuden_MD-4040 | L1 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 1uF/25V | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 2.7K | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 47K | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | ADM803SAKSZ | ADM803SAKSZ:KS_3_ADI | U3 |
| 1 | ADP124ACPZ-3.3-R7 | ADP124ACPZ-3.3-R7:SON50P200X200X65-9N-D | IC1 |
| 1 | B2B-PH-SM4-TB(LF)(SN) | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | BU2450SM-JJ-G | BU2450SM_JJ_GTR:BAT_BU2450SM-JJ-G | BT1 |
| 1 | ESP32-S3-WROOM-1 | Espressif:ESP32-S3-WROOM-1 | U4 |
| 1 | F34G-1A7Q1-E8C24 | F34G_1A7Q1_E8C24:AMPHENOL_F34G-1A7Q1-E8C24 | J3 |
| 1 | HPP845E031R4 | HPP845E031R4:SON100P300X300X90-7N | U6 |
| 1 | LED Blue | LED_SMD:LED_0603_1608Metric | LED2 |
| 1 | LED Red | LED_SMD:LED_0603_1608Metric | LED1 |
| 1 | MAX1898EUB42+T | MAX1898EUB42:SOP50P490X110-10N | IC2 |
| 1 | RESET | 3x4x2:Tactile 3x4x2mm TS-A010 | BOOT1 |
| 1 | RTF025N03TL | RTF025N03TL:RTF025N03TL | Q1 |
| 1 | SLW-66527511-SMT-TR | SMD_Slide_switch:slide switch spdt | SW1 |
| 1 | UBOOT | 3x4x2:Tactile 3x4x2mm TS-A010 | BOOT2 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |
Similar boards
- 6 layers40 × 40 mm

- 2 layers23.5 × 15.7 mm

Capteur htu21d
medm3alem/energy-harvesting-sensor
Carte support du dongle nRF52840, regroupant la gestion d'énergie, l'entrée de récupération, le capteur de température et le connecteur e-paper.
5 parts - 2 layers56 × 56 mm

Pps watch
idlehandsdev/pps-watch
An extremely accurate watch that doesn't tell time.
39 parts42AGPL-3.0 - 2 layers100 × 62 mm

Esp32s3aprs
mcapdeville/esp32s3aprs
ESP32s3 APRS beacon/tracker/logger, USB kiss TNC , USB audio FM tranceiver with Micropython shell
156 parts8CERN-OHL-S-2.0 - 4 layers115 × 130 mm

Fantoccia carrier
adamjvr/fantoccia
An Open Source DAQ hardare system based on https://github.com/marionette-daq/marionette-hardware
29 parts - 2 layers44 × 88 mm

- 2 layers22.3 × 17.8 mm

- 2 layers

AI voice assistant
DhamuVkl/ESP32S3-AI-Voice-Assistant
This project is a complete DIY AI voice assistant built around the ESP32-S3 microcontroller. It combines custom PCB design, advanced audio processing, and cloud-based AI to create a device that rivals commercial smart…
78 parts26MIT
Questions
How big is the Low Power Desktop Weather Station PCB?
It measures 105 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Low Power Desktop Weather Station use?
65 parts, built around the ESP32-S3-WROOM-1-N8, HPP845E031R4, AO3401A and ADP124ACPZ-3.3-R7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Low Power Desktop Weather Station KiCad files?
From the jobitjoseph/Desktop-Weather-Station repository on GitHub, at the commit this page was made from: the board is PCB/Low Power Desktop Weather Station/Low Power Desktop Weather Station.kicad_pcb and its schematic PCB/Low Power Desktop Weather Station/Low Power Desktop Weather Station.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Low Power Desktop Weather Station design in my own project?
Its repository states no licence, so its author keeps all rights: ask jobitjoseph before reusing the design.