
Esp32s3aprs
mcapdeville/esp32s3aprs
ESP32s3 APRS beacon/tracker/logger, USB kiss TNC , USB audio FM tranceiver with Micropython shell

INTERNAL
Buer is an open-source printed circuit board by pmnlla, from the pmnlla/siegewinne repository on GitHub. It is a 2-layer board of 44 × 88 mm with 42 parts on 57 nets, routed with 532 tracks and 31 vias.
It is built around the ESP32-WROOM-32UE-N4 and RTF025N03TL. Its parts include 14 capacitors, 8 resistors, 5 connectors, 5 switches and 3 diodes. It belongs with the ESP32 boards of this library.
INTERNAL
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1uF | Capacitor_SMD:C_1206_3216Metric | C1, C2, C5, C6, C11, C12, C13, C14 |
| 5 | 10k | Resistor_SMD:R_1206_3216Metric | R7, R8, R9, R10, R11 |
| 3 | D | Diode_SMD:D_1206_3216Metric | D1, D2, D3 |
| 2 | 22uF | Capacitor_SMD:C_1206_3216Metric | C9, C10 |
| 1 | 0.1uF | Capacitor_SMD:C_1206_3216Metric | C3 |
| 1 | 100nF | Capacitor_SMD:C_1206_3216Metric | C8 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C7 |
| 1 | 10uH | Inductor_SMD:L_1206_3216Metric | L2 |
| 1 | 20k | Resistor_SMD:R_1206_3216Metric | R6 |
| 1 | 31.6k | Resistor_SMD:R_1206_3216Metric | R5 |
| 1 | 4.7uF | Capacitor_SMD:C_1206_3216Metric | C4 |
| 1 | 47R | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | AP62250WU-7 | AP62250:TSOT26STANDARD_DIO | U2 |
| 1 | CTRL21 | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW4 |
| 1 | CTRL22 | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW5 |
| 1 | Conn_01x02_Pin | TestPoint:TestPoint_2Pads_Pitch5.08mm_Drill1.3mm | J4 |
| 1 | Conn_01x24 | Connector_FFC-FPC:Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | J1 |
| 1 | ESP32-WROOM-32UE | RF_Module:ESP32-WROOM-32UE | U1 |
| 1 | GPIO Expose | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J5 |
| 1 | L | Inductor_SMD:L_1206_3216Metric | L1 |
| 1 | RTF025N03TL | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1 |
| 1 | SW_ENG | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | SW1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW3 |
| 1 | SW_RESET | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | SW2 |
| 1 | header_IIC | Connector:NS-Tech_Grove_1x04_P2mm_Vertical | J3 |
| 1 | header_UART | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J2 |
The 40 most common of 42 parts.

mcapdeville/esp32s3aprs
ESP32s3 APRS beacon/tracker/logger, USB kiss TNC , USB audio FM tranceiver with Micropython shell

jobitjoseph/Desktop-Weather-Station
This project offers a practical way to build a clean and minimal weather station using an ESP32 microcontroller and an E-Ink display.


Volkov997/pen-card
RF Pentesting tool, but small enough for your wallet. Features: Wifi & Bluetooth, NFC, IR, (Sub Ghz, Planned)

NguyenThanhHuy-debug/PCB-Liquid-Dispensing-Cabinet
PCB-Liquid-Dispensing-Cabinet — a software project built with modern tooling.


alexfreed58/z80-CPM-board-with-smart-i-o
This is yet another retro computer running CPM on an actual Z80 CPU with a twist. Instead of using a traditional UART for communications, it uses a RPi pico module that is no bigger and no more expensive than a UART.

byrantech/stepcraft-3-d600-controller
Open-source FluidNC Controller for the Stepcraft-3/D.600 system.
It measures 44 × 88 mm and has 2 copper layers, 1.6 mm thick.
42 parts, built around the ESP32-WROOM-32UE-N4 and RTF025N03TL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pmnlla/siegewinne repository on GitHub, at the commit this page was made from: the board is src/Buer.kicad_pcb and its schematic src/Buer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask pmnlla before reusing the design.