Skip to the content
2 layers26.2 × 54.6 mmLoRa Shigihara, the printed circuit board in 3D

This is another HC project, this time is a LoRa board with an ESP32-S3, SX1262 radio, and U.FL antenna! :D

Size
26.2 × 54.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
53
Pads
147
Tracks, vias
362, 33
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
8 May 2026
Updated
18 Jun 2026

Overview

LoRa Shigihara is an open-source printed circuit board by SovietCoffe404, from the SovietCoffe404/LoRa-Shigihara repository on GitHub. It is a 2-layer board of 26.2 × 54.6 mm with 18 parts on 53 nets, routed with 362 tracks and 33 vias.

It is built around the ESP32-S3-WROOM-1-N8, SX1262IMLTRT and AMS1117-3.3. Its parts include 3 ICs, 2 capacitors, 2 resistors and 1 connector. It belongs with the radio and wireless boards and the ESP32 boards of this library.

Main components

3

README

README.md

LoRa-Shigihara This is another HC project; this time it is a LoRa board with an ESP32-S3, SX1262 radio, and U.FL antenna! :D Made this project because I was a little bit curious 'bout my PCB-Making skills and how to integrate this intoa ESP-32 Marauder

For this project I'm only using KiCad, so I will leave my files right here if u wanna make yours or just take a look to them.

Screenshot 2026-06-17 192539 Screenshot 2026-05-16 205504 Screenshot 2026-05-16 205431 Screenshot 2026-05-16 205356 Screenshot 2026-05-16 235403 Screenshot 2026-06-11 163029
NamePurposeQuantityTotal Cost (USD)LinkDistributor
PCBHaving all integrated over there15.00https://jlcpcb.comJLCPCB
Push ButtonBooting and reset26.23https://www.amazon.com.mx/pulsador-interruptor-momentáneo-microinterruptor-automático/dp/B0DBGMNQV1Amazon
5.1K ResistorsResistance too20.10https://www.digikey.com.mx/es/products/detail/yageo/RC0603FR-135K1L/14008317DigiKey
10k ResistorsFor resistance broo20.06https://uelectronics.com/producto/resistor-10k-ohm-1-10w-smd-0603-rc0603fr-0710kl/Unit Electronics
3.3v RegulatorFor not burning all :)10.30https://www.digikey.com.mx/es/products/detail/evvo/AMS1117-3.3/22482148DigiKey
15µH Inductoraidonnouman10.10https://www.digikey.com.mx/es/products/detail/tdk/MLZ2012M150WT000/2465154DigiKey
Capacitor 10µFDecoupling20.12https://uelectronics.com/producto/capacitor-ceramico-0805-10uf-16v-cl21a106koqnnne/Unit Electronics
Capacitor 100nFDecouplin'40.06https://uelectronics.com/producto/c0603x104k050t-capacitor-ceramico-0603-100nf-50v/Unit Electronics
Type C USBPowering our board!11.01https://es.aliexpress.com/item/1005005371954812.htmlAliExpress
SX1262LoRa Transceiver14.67https://es.aliexpress.com/item/1005011744738566.htmlAliExpress
ESP32-S3-WROOM-1The brain of our board16.32https://www.digikey.com.mx/es/products/detail/espressif-systems/ESP32-S3-WROOM-1U-N8R8/16162638DigiKey

Parts

18
QtyValueFootprintReferences
4100 nfCapacitor_SMD:C_0402_1005Metric100 nF, 100 nF, 100 nF, 100 nF
210ufCapacitor_SMD:C_0603_1608MetricC6, C7
25.1kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR1, R2
2RResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder10k, 10K
2SW_PushButton_Switch_SMD:SW_Push_SPST_NO_Alps_SKRKBOOT, RESET
110 nfCapacitor_SMD:C_0402_1005Metric10 nF
115 uHInductor_SMD:L_0201_0603Metric15 uH
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U3
1ESP32-S3-WROOM-1RF_Module:ESP32-S3-WROOM-1U1
1SX1262IMLTRTPackage_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mmU2
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1

Similar boards

  • 2 layers68.3 × 94.8 mmLORA, the printed circuit board in 3D

    LORA

    dipa-cotton/lora-puck

    LoRA!!

    40 parts
  • 2 layers43 × 54.7 mmUsb hub, the printed circuit board in 3D

    Usb hub

    Nxyz-natan/LORA-BOARD

    LORA BOARD

    21 parts
  • 2 layers27.7 × 56 mmMeshLora, the printed circuit board in 3D

    MeshLora

    RichardM-1337/Mesh-Lora-Board

    This is a lora board and it's something I've never designed before so I'm attempting something new.

    18 partsMIT
  • 2 layers60 × 38 mmLoraguide, the printed circuit board in 3D

    Loraguide

    sectersion/loraguide

    Hello! In this guide, you will create a custom Meshtastic-enabled LORA board with a microcontroller, antenna, radio chip, and other things.

    27 parts
  • 2 layersLoraboard, the printed circuit board in 3D

    Loraboard

    yansha2903-bot/Loraboard

    The project was designed using KiCad and includes a complete schematic, PCB layout, and manufacturing files.

    25 partsMIT
  • 2 layers52.1 × 33.3 mmLoRa board, the printed circuit board in 3D

    LoRa board

    samanbeer/LoRa_board

    i saw a video about it. And saw how cool it is and I wanted to build custom meshtastic node and try the P2P comunication on it.

    43 parts
  • 4 layers30.5 × 72.9 mmTopaz, the printed circuit board in 3D

    Topaz

    dfedor2008/Topaz

    A radio module which can send data through morse code

    60 parts
  • 4 layers51.9 × 75 mmLORA DEVBOARD, the printed circuit board in 3D

    LORA DEVBOARD

    Sash-Reek2010/The-Meshp32

    An ESP32 based devboard who's main purpose is to run Meshtastic firmware!

    34 partsMIT

Questions

How big is the LoRa Shigihara PCB?

It measures 26.2 × 54.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LoRa Shigihara use?

18 parts, built around the ESP32-S3-WROOM-1-N8, SX1262IMLTRT and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LoRa Shigihara KiCad files?

From the SovietCoffe404/LoRa-Shigihara repository on GitHub, at the commit this page was made from: the board is LoRa Shigihara-KiCAD/LoRa Shigihara.kicad_pcb and its schematic LoRa Shigihara-KiCAD/LoRa Shigihara.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LoRa Shigihara design in my own project?

Its repository states no licence, so its author keeps all rights: ask SovietCoffe404 before reusing the design.