Skip to the content
4 layers20 × 32.2 mmValentine, the printed circuit board in 3D

µBeat is a 16-LED PWM-driven heart module built around the STM32G031G8U6. Powered directly from a CR2032 coin cell, it uses high frequency multiplexing and controlled duty cycling to maintain efficiency while delivering a realistic heartbeat.

Size
20 × 32.2 mm
Copper layers
4
Thickness
1.6 mm
Parts
40
Nets
44
Pads
108
Tracks, vias
170, 32
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
13 Feb 2026
Updated
13 Feb 2026

Overview

Valentine is an open-source printed circuit board by souptik-samanta, from the souptik-samanta/uBeat repository on GitHub. It is a 4-layer board of 20 × 32.2 mm with 40 parts on 44 nets, routed with 170 tracks and 32 vias.

Its parts include 16 resistors, 16 diodes, 4 capacitors, 2 connectors and 1 IC. It belongs with the STM32 boards of this library.

README

README.md

uBeat

Parts

40
QtyValueFootprintReferences
161.8KResistor_SMD:R_0402_1005MetricR2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R17, R18
16LEDLED_SMD:LED_0603_1608MetricD1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16
2100nFCapacitor_SMD:C_0603_1608MetricC1, C3
110uFCapacitor_SMD:C_0805_2012MetricC4
14.7uFCapacitor_SMD:C_0805_2012MetricC2
1BatteryConnector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical_SMD_Pin1RightJ2
1Conn_01x04_SocketConnector_PinSocket_1.27mm:PinSocket_2x02_P1.27mm_Vertical_SMDJ1
1STM32G031G8UxPackage_DFN_QFN:QFN-28_4x4mm_P0.5mmU1
1SW_Push_45degButton_Switch_SMD:SW_Push_SPST_NO_Alps_SKRKSW1

Similar boards

  • 4 layers24.4 × 24.4 mmOSO SWAT C1, the printed circuit board in 3D

    OSO SWAT C1

    joeycastillo/Sensor-Watch

    A board replacement for the classic Casio F-91W wristwatch

    40 parts2.1k
  • 4 layers70 × 56 mmPi adapter hc, the printed circuit board in 3D

    Pi adapter hc

    hzeller/spixels

    Spixels - 16-SPI LED Raspberry Pi adapter with library (SPI - Pixels).

    40 parts41LGPL-3.0
  • 4 layers76.7 × 76.7 mmOS816, the printed circuit board in 3D

    OS816

    c0pperdragon/OS816

    An experimental single-board computer using the 65C816

    40 parts28
  • 4 layers30 × 30 mmCamIO, the printed circuit board in 3D

    CamIO

    intergalaktik/Extension_Boards_for_Olimex_GateMate

    Simple extension boards for Olimex GateMate FPGA Board

    40 parts20
  • 4 layers15 × 11 mmVIB STSPIN240, the printed circuit board in 3D

    VIB STSPIN240

    Aightech/CleverHand-hardware

    40 parts17GPL-3.0
  • 4 layers65 × 56 mmPi transceiver hat, the printed circuit board in 3D

    Pi transceiver hat

    M0LTE/pi-transceiver

    An attempt to build a complete ham radio transceiver around a Raspberry Pi

    40 parts15
  • 4 layers95.9 × 90.2 mmBatteryboard, the printed circuit board in 3D

    Batteryboard

    stanford-ssi/samwise-avionics

    Avionics for 2U Rev of Sputnik Satellite

    40 parts13

Questions

How big is the Valentine PCB?

It measures 20 × 32.2 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Valentine use?

40 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Valentine KiCad files?

From the souptik-samanta/uBeat repository on GitHub, at the commit this page was made from: the board is valentine.kicad_pcb and its schematic valentine.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Valentine design in my own project?

Its repository states no licence, so its author keeps all rights: ask souptik-samanta before reusing the design.