

RemoteOceanAcidificationMonitor
Remote Ocean Acidification Monitor based on long range wireless area network.
- Size
- 22.9 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 22
- Pads
- 92
- Tracks, vias
- 119, 6
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 May 2021
- Updated
- 16 Sep 2021
Overview
RemoteOceanAcidificationMonitor is an open-source printed circuit board by sophie-bernier, from the sophie-bernier/RemoteOceanAcidificationMonitor repository on GitHub. It is a 2-layer board of 22.9 × 50.8 mm with 20 parts on 22 nets, routed with 119 tracks and 6 vias.
It is built around the K7803-500R3, MAX3232ID and B140-E3. Its parts include 8 capacitors, 4 resistors, 2 ICs, 2 connectors and 1 diode.
Main components
3K7803-500R3
SIP,11.5x7.6mmDC-DC Power ModulesYLPTECMAX3232ID
SOIC-16-40℃~+85℃ 2 2 250Kbps 300uA 3V~5.5V Short-Circuit Protection Transceiver Yes ±15kV SOIC-16 RS232 ICs ROHSTexas InstrumentsRS232 ICsB140-E3
SMA(DO-214AC)-65℃~+150℃ 1 Independent 1A 200uA@40V 30A 40V 520mV@1A SMA(DO-214AC) Schottky Diodes ROHSVishay IntertechnologySchottky Diodes
README
README.md@file README @author Sophie Bernier (sophie.liz.ber@gmail.com) @brief @version 0.1 @date 2021-08-23
@copyright Copyright (c) 2021
@mainpage Remote Ocean Acidification Monitor Project
Grab the library from: https://github.com/sophie-bernier/RemoteOceanAcidificationMonitor
This open-source hardware and software library is designed to show how the Arduino ecosystem can be used to interface oceanographic sensors with inexpensive data logging and communications systems. The examples in this library are meant to interface the Seabird SeapHOx dissolved O2 sensor and the Pro-Oceanus CO2-Pro CV dissolved CO2 sensor with the Adafruit Feather M0 RFM95 LoRa digital packet radio.
This project owes its existence to the support of Dr. Brent Else, Dr. Kristina Barclay, Dr. Richard Simms, the other researchers working at the University of Calgary, and the Marine Environmental Observation, Prediction and Response Network's Ocean Acidification Community of Practice. This software package was designed to assist them as they study the exchange of greenhouse gases between the air and lakes, rivers, and oceans. Funding for this project was provided by the Natural Sciences and Engineering Research Council of Canada.
This library includes the following examples:
- LoRaInterfaceForwardingTest (LoRaInterfaceForwardingTest_Base.ino and LoRaInterfaceForwardingTest_Endpoint.ino): Attempt to use LoraPoint2PointProtocol, in an application based on LoRaRangeTest, to talk with sensors over radio. CURRENTLY UNRELIABLE due to race conditions between base and endpoint, use simpleSensorCommsEchoRadio to talk with the sensors over radio instead.
- simpleSensorCommsEchoRadio (simpleSensorCommsEchoRadio_Base.ino) and simpleSensorCommsEchoRadio_Endpoint.ino): Simplest possible implementation of radio communications interface between shore-based base and sensor-connected endpoints.
- KiCAD schematic and PCB layout (Shield_PCB_Feather) for sensor interface (TTL UART serial to/from RS-232 serial) and to power the Feather off of the same 12V external supply as the sensors.
- Serial_1_2 (Serial_1_2_RX.ino and Serial_1_2_TX.ino): How to add an additional hardware UART port on the Adafruit Feather (and other Atmel SAMD21 based Arduino-compatible boards) using the unused SERCOM (serial communication) peripherals.
- LoRaRangeTest (LoRaRangeTest_Base.ino and LoRaRangeTest_Endpoint.ino): Uses the Adafruit Adalogger and 128x32 OLED shield to turn the sensor endpoint into a mobile range testing and evaluation unit that can change the endpoint's radio settings remotely.
- Misc. LoRa and serial examples for pycom LoPy4 boards.
All of these examples are short and simple, so additions and changes to the code should be straightforward.
The Tests folder contains additional examples of work-in-progress features such locally emulating the sensor interface.
Additional documentation, including testing and problem solving reports, can be requested from Brent Else's lab OneDrive.
This project is published under the MIT License
Copyright © 2021 University of Calgary
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6, C7, C8 |
| 3 | 22uF,25V | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1, C2, C3 |
| 2 | 3.3k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R4 |
| 1 | 14.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 3.74k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | Adafruit_Feather_Generic | MCU_Module_Adafruit:Adafruit_Feather_WithMountingHoles | A1 |
| 1 | B140-E3 | Diode_SMD:D_SMA | D1 |
| 1 | Conn_01x02 | Connector_Molex:Molex_Nano-Fit_105313-xx02_1x02_P2.50mm_Horizontal | J1 |
| 1 | Conn_02x03_Counter_Clockwise | Connector_Molex:Molex_Nano-Fit_105314-xx06_2x03_P2.50mm_Horizontal | J2 |
| 1 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1.5mm | FID1 |
| 1 | K7803-500R3 | Remote Ocean Acidification Monitor:K7803-500R3 | U1 |
| 1 | MAX3232 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
The 19 most common of 20 parts.
Similar boards
- 2 layers144.1 × 108.1 mm

- 2 layers80 × 50 mm

Doorsys
fabiojmendes/doorsys-hardware
Repo for storing the hardware designs for the doorsys system
33 partsMIT - 2 layers70 × 100 mm

EKIO DIx32
Konstantin-Dudersky/plc-modules
После открыть файл в Inkscape и изменить размер страницы
45 parts - 2 layers28 × 30 mm

- 2 layers130.6 × 112 mm

- 11 layers74.2 × 29.2 mm

SolderingStationPCB
clytle374/Open-T12-Soldering-Station
This is a clone of the cheap T12 soldering stations, attempting to eliminate the shortfalls of the cheap designs.
68 parts43GPL-3.0 - 2 layers120 × 100 mm

Root
GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.
127 parts28MIT - 2 layers150 × 90 mm

Stepper with DRV8825 controller board V3
JasonHEngineering/DIY-Robot-Arm-V2
Below illustration of user interface dealing with forward kinematics values:
65 parts17
Questions
How big is the RemoteOceanAcidificationMonitor PCB?
It measures 22.9 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RemoteOceanAcidificationMonitor use?
20 parts, built around the K7803-500R3, MAX3232ID and B140-E3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RemoteOceanAcidificationMonitor KiCad files?
From the sophie-bernier/RemoteOceanAcidificationMonitor repository on GitHub, at the commit this page was made from: the board is Shield_PCB_Feather/Remote Ocean Acidification Monitor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RemoteOceanAcidificationMonitor design in my own project?
Its repository states no licence, so its author keeps all rights: ask sophie-bernier before reusing the design.