Skip to the content
2 layersNoname, the printed circuit board in 3D
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
40
Pads
75
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 4
Created
30 Jul 2016
Updated
31 Jul 2016

Overview

Noname is an open-source printed circuit board by smithcts, from the smithcts/KiCad_Projects repository on GitHub. It is a 2-layer board with 14 parts on 40 nets.

It is built around the 74LS153DC. Its parts include 13 connectors and 1 IC.

Main components

1

Parts

14
QtyValueFootprintReferences
174LS153Housings_DIP:DIP-16_W7.62mm_LongPadsU1
1AnalogSocket_Arduino_Uno:Socket_Strip_Arduino_1x06P9
1Digital_10Socket_Arduino_Uno:Socket_Strip_Arduino_1x10P8
1Digital_8Socket_Arduino_Uno:Socket_Strip_Arduino_1x08P12
1Encoder1Pin_Headers:Pin_Header_Straight_1x04P2
1Encoder2Pin_Headers:Pin_Header_Straight_1x04P4
1Enocder3Pin_Headers:Pin_Header_Straight_1x04P6
1Limit1Pin_Headers:Pin_Header_Straight_1x02P7
1Limit2Pin_Headers:Pin_Header_Straight_1x02P10
1Limit3Pin_Headers:Pin_Header_Straight_1x02P11
1Motor1Pin_Headers:Pin_Header_Straight_1x03P1
1Motor2Pin_Headers:Pin_Header_Straight_1x03P3
1Motor3Pin_Headers:Pin_Header_Straight_1x03P5
1PowerSocket_Arduino_Uno:Socket_Strip_Arduino_1x08P13

More from smithcts/KiCad_Projects

1

Similar boards

  • 2 layers407 × 184 mmTRS-80-Model I G E1, the printed circuit board in 3D

    TRS-80-Model I G E1

    RetroStack/TRS-80-Model-I-G-E1

    Hardware Replica of the TRS-80 Model I Revision G

    230 parts57MIT
  • 2 layers131.1 × 108 mmISA EGA CHIPS, the printed circuit board in 3D

    ISA EGA CHIPS

    hkzlab/ISA_EGA_CHIPS

    This board is and EGA clone based on a reversed PA-WTEGA card, based on the chipset by CHIPS (P82C435 + P82A436).

    68 parts24
  • 4 layers194.5 × 188.6 mmMyCpu, the printed circuit board in 3D

    MyCpu

    fortinsylvain/MyCpu

    Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

    162 parts18MIT
  • 2 layers20.6 × 57.4 mmAmiga Boot Selector, the printed circuit board in 3D

    Amiga Boot Selector

    reinauer/Amiga-Boot-Selector

    This is a Floppy Switcher for the Amiga 500/2000. It allows you to switch DF0/DF1, making it possible to boot from either a Gotek drive or the internal floppy drive. without relying on AmigaOS.

    7 parts18
  • 2 layers236.8 × 169.8 mmTK2000, the printed circuit board in 3D

    TK2000

    clemarfolly/Microdigital-TK2000

    Reprodução da PCB do TK-2000 da Microdigital, clone do Micro-Professor MPF-II

    212 parts17
  • 4 layers308 × 225.4 mmE800j rev c, the printed circuit board in 3D

    E800j rev c

    codepainters/e800j

    Elwro 800 Junior replica

    483 parts16
  • 2 layers203.4 × 139.1 mmTandy Color Computer Multi Pak, the printed circuit board in 3D

    Tandy Color Computer Multi Pak

    djtersteegc/Tandy-Color-Computer-Multi-Pak

    Respin of the Tandy 26-3024 Multi-Pak (MPI) for the DIY builder.

    70 parts16MIT

Questions

What parts does the Noname use?

14 parts, built around the 74LS153DC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Noname KiCad files?

From the smithcts/KiCad_Projects repository on GitHub, at the commit this page was made from: the board is SeniorDesign_Shield/noname.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Noname design in my own project?

Its repository states no licence, so its author keeps all rights: ask smithcts before reusing the design.