2 layers107 × 54 mm
2 layers
Water Level Controller using 555
smartinternz02/SPS-9145-Water-Level-Controller-using-555-TimerWater Level Controller using 555 Timer
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 9
- Pads
- 28
- Tracks, vias
- 87, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Mar 2021
- Updated
- 24 Mar 2021
Overview
Water Level Controller using 555 is an open-source printed circuit board by smartinternz02, from the smartinternz02/SPS-9145-Water-Level-Controller-using-555-Timer repository on GitHub. It is a 2-layer board with 12 parts on 9 nets, routed with 87 tracks and 0 vias.
It is built around the NE555D. Its parts include 4 resistors, 4 connectors, 1 capacitor, 1 IC and 1 switch.
Main components
1README
README.mdSPS-9145-Water-Level-Controller-using-555-Timer
Water Level Controller using 555 Timer
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4 |
| 2 | Conn_01x01_Female | Connector:Banana_Jack_1Pin | J3, J4 |
| 1 | 5v RELAY | Relay_THT:Relay_1P1T_NO_10x24x18.8mm_Panasonic_ADW11xxxxW_THT | K1 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_Kingstate_KCG0601 | BZ1 |
| 1 | CP | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | M1 | Connector:Banana_Jack_1Pin | J1 |
| 1 | M2 | Connector:Banana_Jack_1Pin | J2 |
| 1 | NE555D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
Similar boards
- 2 layers140.7 × 47.4 mm
EG8010 A1
Millisman/EG8010
Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)
201 parts17MIT - 2 layers175 × 115 mm
Laser Controllerv2 only for pcb test
Andre1Becker/GalvOS
Open-source ESP32-S3 laser show controller — built to replace proprietary OEM controllers in RGB galvo laser projectors
122 parts11GPL-3.0 - 4 layers189.4 × 59.1 mm
- 2 layers95 × 60 mm
- 2 layers39 × 66.5 mm
- 6 layers210 × 119 mm
Claculator Keypad
Robert-Mones/Claculator
A reverse Polish notation calculator with added features such as comparisons, branching, and custom recursive operators taken from the Clac project from the 15-122 course at Carnegie Mellon University.
202 parts5 - 2 layers155 × 30 mm
Questions
What parts does the Water Level Controller using 555 use?
12 parts, built around the NE555D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Water Level Controller using 555 KiCad files?
From the smartinternz02/SPS-9145-Water-Level-Controller-using-555-Timer repository on GitHub, at the commit this page was made from: the board is Water Level Controller using 555.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Water Level Controller using 555 design in my own project?
Its repository states no licence, so its author keeps all rights: ask smartinternz02 before reusing the design.