
SingleTube
aaguy-hue/nixie-project
PCB Designs and software for an STM32-based nixie tube clock

4 channel reciever pcb
Rf ontvanger is an open-source printed circuit board by sky71151, from the sky71151/RF_Reciever_4ch repository on GitHub. It is a 2-layer board of 67.5 × 86.2 mm with 74 parts on 80 nets, routed with 598 tracks and 221 vias.
It is built around the HLK-PM24, AMS1117-3.3 and MMBTA42. Its parts include 22 capacitors, 19 resistors, 7 diodes, 6 switches and 5 connectors. It belongs with the radio and wireless boards and the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | Capacitor_SMD:C_0402_1005Metric | C4, C6, C9, C10, C11, C12, C13, C14, C15, C17, C18, C19, C20 |
| 6 | 1N4007 | Diode_SMD:D_SOD-123F | D1, D2, D3, D4, D5, D6 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R5, R10, R11, R12, R13 |
| 5 | 1k | Resistor_SMD:R_0402_1005Metric | R14, R15, R16, R17, R18 |
| 4 | 10µF | Capacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-I | C5, C7, C8, C16 |
| 4 | 430R | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4 |
| 4 | L_Ferrite | Resistor_SMD:R_0603_1608Metric | 450m1, 450m2, 450m3, 450m4 |
| 4 | MMBTA42 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | RM50-xx21 | Relay_THT:Relay_SPST_Finder_32.21-x300 | K1, K2, K3, K4 |
| 3 | 2k | Resistor_SMD:R_0402_1005Metric | R7, R8, R9 |
| 2 | 100µF 80V | Capacitor_SMD:CP_Elec_10x10 | C2, C3 |
| 2 | 20p | Capacitor_SMD:C_0603_1608Metric | C21, C22 |
| 1 | 200R | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 2K | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 8MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | C | Capacitor_THT:C_Rect_L16.5mm_W5.0mm_P15.00mm_MKT | C1 |
| 1 | Conn_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-5.0-H_1x03_P5.00mm_Horizontal | J2 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J4 |
| 1 | Conn_01x08 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-8-5.0-H_1x08_P5.00mm_Horizontal | J1 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030 | Connector:Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J3 |
| 1 | Fuse | Varistor:RV_Disc_D9mm_W5.7mm_P5mm | F1 |
| 1 | HLK-PM24 | Converter_ACDC:Converter_ACDC_HiLink_HLK-PMxx | PS1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D7 |
| 1 | LF50_TO252 | Package_TO_SOT_SMD:TO-252-2 | U1 |
| 1 | STM32F030C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | SW_DIP_x04 | Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads | SW1 |
| 1 | SW_MEC_5E | Button_Switch_SMD:SW_SPST_TL3305A | SW2 |
| 1 | Varistor | Varistor:RV_Disc_D12mm_W3.9mm_P7.5mm | RV1 |

aaguy-hue/nixie-project
PCB Designs and software for an STM32-based nixie tube clock


Motokichirou/gamma-spectrometer
NaI(Tl) gamma spectrometer: STM32G474 + R1307 PMT + 4-board stack, KiCad schematics, LTspice simulations

popovb/zxRebornClock
Часы на ГРИ ИН-14 с синхронизацией времени через интернет



valerionew/Banana-Random-Number-Generator
Random number generator based on radioactivity from bananas

It measures 67.5 × 86.2 mm and has 2 copper layers, 1.6 mm thick.
74 parts, built around the HLK-PM24, AMS1117-3.3 and MMBTA42. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sky71151/RF_Reciever_4ch repository on GitHub, at the commit this page was made from: the board is rf_ontvanger.kicad_pcb and its schematic rf_ontvanger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sky71151 before reusing the design.