

SingleTube
PCB Designs and software for an STM32-based nixie tube clock
- Size
- 49 × 68 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 63
- Pads
- 173
- Tracks, vias
- 367, 44
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 14 Jul 2026
- Updated
- 12 Aug 2026
Overview
SingleTube is an open-source printed circuit board by aaguy-hue, from the aaguy-hue/nixie-project repository on GitHub. It is a 2-layer board of 49 × 68 mm with 40 parts on 63 nets, routed with 367 tracks and 44 vias.
It is built around the STM32F103C8T6, AMS1117-3.3 and MMBTA42. Its parts include 13 capacitors, 9 resistors, 4 ICs, 2 transistors and 2 connectors. It belongs with the lEDs and displays boards and the STM32 boards of this library.
Main components
3STM32F103C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 20KB 2V~3.6V 32 Bit 37 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMMBTA42
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mV 300V 350mW 500mA 50MHz 5V NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
README
README.mdNixie Project
This is a collection of all the PCB designs and software I've written for an STM32-based Nixie tube clock.
Nixie tubes are some really neat old displays from back during the 1960s, though they kept being used in the USSR for quite a while, so you can find them on ebay being sold from various post-soviet states. They have a pretty cool signature orange-ish glow that looks cool, so I wanted to make a digital clock with them.
Note: Nixies operate at high voltage (albeit very low current), so make sure to exercise caution when working with them!
Online image of a Nixie clock (hopefully once mine is built I can replace this image with my own!)
Project Structure
This is a bit unorganized and will likely soon be refactored, but at the moment this is the structure:
- 3D_Models: 3D models used in the PCBs (the NCH8200HV and my Micro USB connector)
- NixieProject.pretty: Footprint library
- nixies-us.pretty: A footprint library of various Nixie tubes
- nixies-us.mod: Schematic symbols for different Nixie tubes
- Single Tube Board: A PCB to power a single Nixie tube
- software: Software for the various projects
- nixie_simple: Software for breadboard experiments
- single_nixie: Software for single Nixie tube PCB
- symbols: Custom schematic symbols
Part descriptions
- STM32F103C8T6: Microcontroller controlling the tubes
- NCH8200HV: Voltage booster, input 2.5-15V, output 170V
- AMS1117-3.3: 3.3V linear regulator
- K155ID1: BCD-to-decimal decoder
The rest of the parts should be pretty self-explanatory.
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C8, C9 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 1k5 | Resistor_SMD:R_0402_1005Metric | R1, R3 |
| 2 | 20p | Capacitor_SMD:C_0402_1005Metric | C12, C13 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C14, C15 |
| 2 | 30k | Resistor_SMD:R_1206_3216Metric | R7, R10 |
| 2 | 4k7 | Resistor_SMD:R_1206_3216Metric | R11, R12 |
| 2 | 8p | Capacitor_SMD:C_0402_1005Metric | C10, C11 |
| 2 | MMBTA42 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric | R4 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1M | Resistor_SMD:R_1206_3216Metric | R13 |
| 1 | 32.768KHz | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | IN-14 | Nixies-US:nixies-us-IN-14 | N1 |
| 1 | K155ID1 | NixieProject:SN74141N | U5 |
| 1 | LOGO | LOGO | G*** |
| 1 | NCH8200HV | NixieProject:NCH8200HV | U2 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | STM32F103C8T6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_SPDT | Button_Switch_THT:SW_E-Switch_EG1224_SPDT_Angled | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_XKB_U254-051T-4BH83-F1S | J1 |
Similar boards
- 4 layers86 × 47 mm

- 2 layers187.5 × 45 mm

Gamma spectrometer
Motokichirou/gamma-spectrometer
NaI(Tl) gamma spectrometer: STM32G474 + R1307 PMT + 4-board stack, KiCad schematics, LTspice simulations
231 parts - 2 layers148.5 × 90 mm

ZxRebornClock
popovb/zxRebornClock
Часы на ГРИ ИН-14 с синхронизацией времени через интернет
125 partsMIT - 2 layers67.5 × 86.2 mm

- 4 layers128 × 60 mm

- 2 layers68 × 40 mm

Stm32-io extend
hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain
44 parts170CC0-1.0 - 2 layers99.1 × 58.4 mm

HEAT
milar111/HEAT
An open-source STM32 SMD assembly station for precision soldering. Uses a custom Smart Pulse & Coast algorithm to drive 400W mains heaters via SSR. Features OLED UI, NTC feedback, and safety cooling.
57 parts9 - 2 layers71.3 × 25.4 mm

Questions
How big is the SingleTube PCB?
It measures 49 × 68 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SingleTube use?
40 parts, built around the STM32F103C8T6, AMS1117-3.3 and MMBTA42. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SingleTube KiCad files?
From the aaguy-hue/nixie-project repository on GitHub, at the commit this page was made from: the board is Single Tube Board/singleTube/singleTube.kicad_pcb and its schematic Single Tube Board/singleTube/singleTube.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SingleTube design in my own project?
Its repository states no licence, so its author keeps all rights: ask aaguy-hue before reusing the design.